Search results for query: *

  1. javajunkie

    Volume values will not save. Help anyone?

    Can you post the preset?
  2. javajunkie

    Compressor

    Give the compressor built into the amp block a whirl, it can have a similar vibe and only 2 parameters to worry about Comp threshold and output comp.
  3. javajunkie

    Most Axe-Change Presets won't Load on my Axe-FX 2 XL 15.05 FW

    Yep, basically it just doesn't have the passive eq. theer nay have been a couple of other minor things.
  4. javajunkie

    Most Axe-Change Presets won't Load on my Axe-FX 2 XL 15.05 FW

    Works here in 15.06 on XL.
  5. javajunkie

    Most Axe-Change Presets won't Load on my Axe-FX 2 XL 15.05 FW

    Wait you said you are on 15.05. Editor support is the same for 15.05 and 15.06. 15.06 was just bug fixes. Passive eq was added in 15.05.
  6. javajunkie

    Most Axe-Change Presets won't Load on my Axe-FX 2 XL 15.05 FW

    I would imagine patches created with 15.06 may not be compatible with 15.05 because of the new passive eq.
  7. javajunkie

    Noise from Rear Input 1...

    When you switch the front and rear input select you turn on/off the digital processing that compensates for front input analog processing that lowers the noise floor. I imagine you are hearing that.
  8. javajunkie

    Noise from Rear Input 1...

    The noise gate works off the rear left as well.
  9. javajunkie

    I like my tone better then the Albums (John Cougar Mellencamp "Hurt So Good"

    Vey nice.
  10. javajunkie

    Using A Guitar Cable For Output 2

    Just a standard instrument cable.
  11. javajunkie

    Using A Guitar Cable For Output 2

    The Axe-fx output 2 jacks are unbalanced so the Canare is appropriate.
  12. javajunkie

    Axe Fx XL_MFC 101 MKII+ Roland FC 100

    something like a midi soft step, Gordius LG2 would take up a lot less space horizontally. Even a second mfc-101 would. Personally, I would stick with one unit with more buttons. Liquid- foot+ pro+ or the RJM Mastermind GT/22. Pricier for sure but more unified. If I did go with something like...
  13. javajunkie

    Can the Pedal Jack send an output signal to turn on a distortion pedal?

    Personally I always put my real drives in the front input. The front input has soft limiter so you do not need to worry about digital clipping near as much, and it has a lower perceived noise floor. Also, when using fuzz pedals, the tend to like an unbuffered signal into the pedal. Putting a...
  14. javajunkie

    Axe Fx XL_MFC 101 MKII+ Roland FC 100

    How many buttons do you want for preset changes, how many for scene changes. from what you are stating you want to keep the MDFC-101 (not just get something with more buttons)?
  15. javajunkie

    Axe Fx XL_MFC 101 MKII+ Roland FC 100

    What are your requirements?
  16. javajunkie

    FXL block question

    That is why I asked what signal was feeding the FX Loop block.
  17. javajunkie

    Axe Fx XL_MFC 101 MKII+ Roland FC 100

    Yes, that shouldn't be an issue, You would need to run the fc100 into the MIDI in of the Axe-fx II XL. That's a lot of floor space though. also, you would still not free up the bottom 5 switches (except in reveal mode), unless you tookthe MFC-101 out of Axe-fx Mode. If you want more switches, I...
  18. javajunkie

    FXL block question

    no it hasn't changed. I was thinking he meant it was working with echo on (no fx loop), but not with fxloop (no echo on).
  19. javajunkie

    Listening to mp3 and playing to it using AF2's headphone out

    You can use the fxloop block and plug into input 2 with Ipod. place the fx loop all by itself in the last column with nothing connect to the left. That will pass input 2 to output 1.
  20. javajunkie

    FXL block question

    Where are you placing the effects loop block? What signal is feeding it?
  21. javajunkie

    Metronom out just to headphones?

    Possibly. It does not have that ability now. You could start a post in the wish list section.
  22. javajunkie

    Metronom out just to headphones?

    No. The headphone outs use the same signal as output 1.
  23. javajunkie

    No d/e/f xl bank access

    Because that is how total sync works from the Axe-fx. It sends the preset's name and effects states to the MFC-101. For the MFC-101 to send the data to the Axe-fx, it needs to send a program change. That program change needs to be stored somewhere (in presets on the MFC-101). The way around...
  24. javajunkie

    delay + fxl behaviour?

    Well you are panning row 2 all the way left so before the fx loop. It will be sending a mono signal. I can't tell what you are doing outside the axe-fx and sending back into the grid.
  25. javajunkie

    delay + fxl behaviour?

    Like I said, it isn't doing that with my fx loop.
  26. javajunkie

    delay + fxl behaviour?

    50%, be sure you are in stereo or have phase reverse on the delay block set to none.
  27. javajunkie

    AxeFXII MKII vs XL Patches

    There is not at this time.
  28. javajunkie

    OPTIMAL A/D INPUT LEVEL FOR RECORDING VOCALS??

    Input 1 and 2 are line level and can handle up to +20dBu. From the manual on the mic pre: - If you want the smallest amount of coloration, always set the OUTPUT level potentiometer at or close to maximum and adjust the output level with the stepped MIC/LINE gain switch. - If you want more...
  29. javajunkie

    OPTIMAL A/D INPUT LEVEL FOR RECORDING VOCALS??

    Same as guitar. Your peaks should just tickle the red.
  30. javajunkie

    Tap tempo in Axe fx not very accurate?

    It uses an average to get the tempo. the tempo is averaged over the number of taps, up to ten taps. If more then ten taps are entered the average is over the last ten. The averaging is reset if more than two seconds elapse between taps.
  31. javajunkie

    Direct FOH - Delay Block Question

    Room reflections can mask the delay. this is why there is an global offset for Reverb and Effects mix in the Global menu. You can turn this on in an effect in a preset and then use the global offset to adjust the relative mix for the room.
  32. javajunkie

    Humanize Control/Simulating Dual Recorded Guitar Tracks Live?

    We already have a random waveform for the LFO. You can modify delay time and detune of pitch block ( highly constrained) to get that effect. Real double tracking will sound better though.
  33. javajunkie

    Red Dog Music (UK)

    Just an FYI: Here are the Fractal Audio Authorized delaers: Fractal Audio Systems - Sales - Where to Buy the Axe-Fx II and MFC-101
  34. javajunkie

    delay + fxl behaviour?

    He is talking about before and after the fx loop though. The fx loop is before the amp in either case. At least that is how I understand he is explaining it. I think he send is send the delay signal back on itself increasing the mix.
  35. javajunkie

    delay + fxl behaviour?

    It has to be something with that routing in the switchblade. Create a preset with just an fxloop. delay is the same before or after. At least it is on my Axe-fx. It sounds like the send and return are sending dome of the delay back into the signal so when it is before it takes half the mix and...
  36. javajunkie

    Can you control input gain on fx loop?

    I leave mine up all the way as well (I have some presets with fx loop before amp others after). To keep clipping issues down and allow for unity gain with my effects in the fx loop, i lowered all my amp block levels by ~-10db. I was running fairly hot prior to that.
  37. javajunkie

    Red Dog Music (UK)

    Be aware, it is not a Fractal Authorized distributor and the warranty will not be valid.
  38. javajunkie

    Effects before or after amp and cabinet

    Different flavor of ice cream.
  39. javajunkie

    Assigning the ABCD knobs

    gain, yes. bass, mid, treble, no.
  40. javajunkie

    single CLR, output 1 stereo or copy l+r ??

    If you use L+R sum, you need to be wary of stereo effects doing strange things. If you leave it at stereo and just use one output, you have to be wary about losing what is on the other channel.
  41. javajunkie

    delay + fxl behaviour?

    Why do have the send and return there? If you are using external effects the fx loop does that automatically.
  42. javajunkie

    Effects before or after amp and cabinet

    No, delay and reverb before cab or after should be the same (with some caveats),as the stereo field is the same and there are no nonlinear effects afterward. now before and after amp block is an entirely different thing. Before the amp, reverb and delay can be much more pronounced and less...
  43. javajunkie

    Can you control input gain on fx loop?

    Set the Bypass mode of the delay block on top of the FX loop to Mute In. That way you preserve the wet/dry mix of H9.
  44. javajunkie

    delay + fxl behaviour?

    Post your preset, it is probably your routing.
  45. javajunkie

    Feedback When Recording

    With the realization it may not be the type of feedback you need. Distance makes a difference on how it feedback. It is not just about volume.
  46. javajunkie

    Can you control input gain on fx loop?

    A good place to start is to review 5.8 of the manual of the FX Loop block to get get a better idea of how the block is laid out. Make sure your have your ins/out in the IO-Audio menu set to mono/stereo depending on how you have things set up. Just remember the mixer sections is your send to the...
  47. javajunkie

    Feedback When Recording

    Somethings that will cause feedback at low volumes. Fuzz pedals, these cause self-oscillation with some settings and can give infinite sustain at lower volumes. Ebow or sustainiac. Or Softtube Acoustic Feedback VST plugin. Under most circumstances, I prefer guitar/amp interaction. Also...
  48. javajunkie

    delay + fxl behaviour?

    What your routing? My mix is the same before or after the fx loop?
  49. javajunkie

    Breaktrhough with Recto and a question

    Peter Stormare Swedish
  50. javajunkie

    Quick question on Fender Princeton amp tone controls

    For all the amps, if the real amp doesn't have the control, generally leave them at default.
  51. javajunkie

    Quick question on Fender Princeton amp tone controls

    The Princeton has treble and bass (at least my 65 reverb does). Set mid at 5 for accuracy.
  52. javajunkie

    Fletcher Munson with Recorded Guitar Tracks

    I said this in another post but I will mention again here. the Fletcher-Munson Effect is a psycho-acoustic phenomena. It only has to do with how human perceive changes in volume. So if the recording is played back at the same volume, then what is different isn't really directly attributable the...
  53. javajunkie

    Is there such a thing as "Reverse Fletcher Munson"??

    Just an FYI, the Fletcher-Munson effect is all about a human's perception of frequency response at different volume levels. If one listener is is hears the signal at a significantly different volume than another they will likely perceive the frequency response differently. How hard the...
  54. javajunkie

    Auto Engage in Scene 1 on x aktivates y when bypassed in Scene 2 [SOLVED]

    The solution for your particular problem can be achieved by setting the mix in pitch1 Y state to 0%. Then it will not matter if it auto-engages.
  55. javajunkie

    High Gain Inconsistent Hissing Sound [NOT A BUG]

    You are probably used to hearing the noisegate. A new feature called noisegate offset was added in the global menu. when you first update to a firmware that has it, it will need the default reset. Set it to 0.00db and see if that helps.
  56. javajunkie

    Auto Engage in Scene 1 on x aktivates y when bypassed in Scene 2 [SOLVED]

    Modifiers stick across X/Y states. So if it is assigned in X, it will be in Y. What you can do for Y is turn the mix to 0%.
  57. javajunkie

    Request: Worship Presets Please

    I'll post some for the non XL next week.Saturday I am going to be working with a Worship Leader with an older II to help him with his patches.
  58. javajunkie

    Which FW sounds best

    Unless the bug he ran into was this: "Fixed Parametric EQ block band 4 selecting wrong filter type on presets created with certain firmware versions."
  59. javajunkie

    Power Level AC-20

    Right, the point of power scaling is to get a cranked master volume tone at lower volume. All we need to do on the Axe-fx to get that is lower the Amp level.
  60. javajunkie

    Trouble with recording Axe Fx via USB direct into DAW

    You need to extract the drivers from the zip file and run the executable.
  61. javajunkie

    Anyone else question your dedication to a specific amp?

    Too many great models.
  62. javajunkie

    About Phase

    As has been said, the delay parameter in the cab block is just for this. I use it sometimes, it can be really helpful. A small change in delay can do some really good or really bad things.
  63. javajunkie

    XL FW15.05 dump new banks to MIDI/USB?

    Cliff is aware of it.
  64. javajunkie

    Request: Worship Presets Please

    It is for an XL.
  65. javajunkie

    Free Ultra Res IR's and Axe Fx XL

    Yes, but I believe they already exist as factory presets in the XL
  66. javajunkie

    About the Axe-Fx II XL

    No
  67. javajunkie

    Saturationswitch on / off with expression-pedal

    In the modifier edit area change mid to 0%. It will skip over ideal.
  68. javajunkie

    Request: Worship Presets Please

    D30 is awesome. I still use the boutique a lot too. The orange AD30 is one of real favorites.
  69. javajunkie

    Request: Worship Presets Please

    Here is one I use a lot. Each scene is a little different. the drive in the amp is change by scene controllers. It has 2 delays each with X/Y setting that do different things. Drive has an X/Y as well. Here is a quick example of scene 1 I let the chords ring out more from :43 sec on.
  70. javajunkie

    Request: Worship Presets Please

    I can post a few of mine. I use scenes and my foot controller set the tempo so that will be different. Also, I use purchased user cabs on some. What songs are you doing? The no sound the presets you downloaded are probably due to a volume block in the preset (if so replace with a shunt) or a...
  71. javajunkie

    How to get this amazing Reggae wall of reverb sound?

    I concur.
  72. javajunkie

    question about transferring patches from the II to the XL

    not that I can think of. But you only do it for each global amp then assign them globally in the XL.
  73. javajunkie

    question about transferring patches from the II to the XL

    Have you tried unlinking the global then exporting the preset?
  74. javajunkie

    How to get this amazing Reggae wall of reverb sound?

    The Blue Sky is on his far left bottom. I also see a mobius,time line, el capistan, pog 2, jamman, ehx voicebox, maxon analog delay, and some orange drive pedal. It looks like most of the time he just clicks on the blue sky and the wah. I have a blue sky and a big sky. The spring verbs are...
  75. javajunkie

    How to get this amazing Reggae wall of reverb sound?

    Either tape, analog or digital should be fine. Keep the delay time between 80-120 ms (I would guess), only one or 2 echos. The mix of the delay and reverb should be pretty high, since it is being cut off quickly.
  76. javajunkie

    How to get this amazing Reggae wall of reverb sound?

    The filtering is the wah. The cut off sounds like he just cut the effect off with no trail.
  77. javajunkie

    How to get this amazing Reggae wall of reverb sound?

    sounds like a spring reverb and maybe a slapback delay.
  78. javajunkie

    Did your effect pedals GAS stop since you bought your Axe fx?

    No, I have more than ever.
  79. javajunkie

    Output 1 and 2 Clipping Leds [FIXED]

    Working normally here now with 15.06.
  80. javajunkie

    Question for Axe FX II Mesa Boogie Mark series amps

    Mine is not :)
  81. javajunkie

    Tighten Deluxe Tweed's Low

    Sorry, yes low cut. The Cut switch is a milder cut, the low cut is variable with its frequency. They both happen at the input of the amp. If you look at the amp block section of the manual it show where most parameters are processed within the amp block.
  82. javajunkie

    Question for Axe FX II Mesa Boogie Mark series amps

    You could get the original MkIIc+ with Simul-Class.
  83. javajunkie

    Tighten Deluxe Tweed's Low

    The amp block has a hicut (in advanced parameters) where you can select the frequencies as well, if you do not want to add a peq or filter in front.
  84. javajunkie

    Output 1 and 2 Clipping Leds [FIXED]

    Output 2 clipping light is working here, just not output 1.
  85. javajunkie

    Tighten Deluxe Tweed's Low

    A couple of things you can do, use the cut switch in the amp block or raise the lo cut freq in the adv parameters. Increase the definition parameter slightly. Also, try a different cab. That can have a huge difference on tightness..
  86. javajunkie

    Output 1 and 2 Clipping Leds [FIXED]

    Not working here on the XL. I cannot get the output 1 clip light to work. Output 2 lights up just fine.
  87. javajunkie

    Looking for Boulder CO A2 Guru to hire

    Denver here.
  88. javajunkie

    New Liquid Foot Editor and Firmware 4.0 from FAMC Released

    Yes, when you download the editor it shows up at 4.01
  89. javajunkie

    LFO Run CC

    It can be any CC you want really. As people have stated, assign the run parameter to one of the 12 Ext Ctls in the Axe-fx. Then either use the defaults CCs assigned to it or change them to a CC# you want. Another way to keep them trm sync'd is to have the run parameter triggered by the...
  90. javajunkie

    Is this a possibility? Has it been thought of before?

    He needs schematics and the amp
  91. javajunkie

    Upcoming Axe-Fx II Streaming Class

    Superb job Cooper. You did a fantastic job.
  92. javajunkie

    About the decibel (dB)

    Map it out on a graph. Double every point. You will not get a straight line but a log function.
  93. javajunkie

    Output 2 noise is pretty low

    To get rid of the residue hiss, use the gate block as an expander. Place the gate block after the fx loop block. Use a very hi ratio, and a quick attack release time. Start with the threshold all the way down and raise it up until this hiss disappears.
  94. javajunkie

    Upcoming Axe-Fx II Streaming Class

    Good luck Cooper! I'll try and tune in tomorrow.
  95. javajunkie

    Stand for axe fx when in gator case?

    This what I use. It has been rock sold and folds up easily. From Home Depot.
  96. javajunkie

    It Never Fails

    Yes, you will. simply awesome for an envelope filer. Low shelf or peaking is just killer.
  97. javajunkie

    Dynamic range issues

    You do. Output 2 can be used for the dry input. Set the Echo Output 2 (I/O-audio) to Input and the dry signal from your guitar will be sent out of output 2.
  98. javajunkie

    Latency in scene change

    Especially in live setting. The only difference, from what I understand, is oversampling is higher when using a single amp block. This can reduce any aliasing, since I do not hear any aliasing whether I use 2 or 1 amp, it is a moot point here. any one I have A/B'd 2 vs 1 amp block with, has not...
  99. javajunkie

    Latency in scene change

    I don't believe it does.
  100. javajunkie

    Muddy high gain sound

    Don't leave out the room in the discussion. Room nodes and anti nodes can dramatically asker frequency response in a given listening location. Do you have you monitors close to a wall?
View older results
Back
Top Bottom