Search results for query: *

  1. T

    Planetshakers - Turn It Up - Guitar Cover - Gibson Les Paul Classic Plus - FW13

    You are a very tight rythmplayer , quite impressive. The sound also fitted very well in the mix.
  2. T

    Can you hear a difference?

    Yes The palm mutes sounds like shit in the second half. The pre eq must be wrong. To much low freq sent into the virtual preamp I think.
  3. T

    Can you hear a difference?

    Oh sorry ! I didn't see this was actually a new thread and probably a new question.
  4. T

    Can you hear a difference?

    I don't wanna be an asshole but: I thought cliff asked a question. Possible answers was supposed to be yes or no. This is no personal isssues like if anybody is a good or bad person. I can't understand why some people take this personally. Why not just listen, answer, maybe see how some...
  5. T

    Axe with Superior Drummer

    I can't see what sup drummer has to do with this. I suppose you are recording your audio tracks in reaper.
  6. T

    Do You Hear a Difference

    The first part of the first clip sounds more alive to me . (but it´s hard without a song and lots of instruments)
  7. T

    Do You Hear a Difference

    That was a really good idea ! :lol But then the timing must be identical and the playing guitar source ....
  8. T

    Do You Hear a Difference

    I thought I was the only one noticing this :-):lol
  9. T

    Do You Hear a Difference

    How do we know wich link everybody is refering to. They are reversed , right ? I suppose we all should refere to the first link ...
  10. T

    Do You Hear a Difference

    I know that the question was if we hear a difference. I will check in the studio later , but can´t do it right now. What if you put two rythm-guitars and a solo in a song and see how we experienced the mix ? I find isolated tracks hard to value.
  11. T

    Power amp separations/Brit Pre/Tube Pre

    Now I get it . We aren´t talking about the same thing. I thought we were talking about the brit pre-amp (JMP-1)
  12. T

    Power amp separations/Brit Pre/Tube Pre

    I think the power amp to the jmp 1 is a standard marshall poweramp sim. I don´t understand the other questions.
  13. T

    Power amp separations/Brit Pre/Tube Pre

    ?
  14. T

    The New Bright Knob

    Maybe it can be usefull for the tx lead to mimmic the lonestars Presence knob.
  15. T

    ultra res and stock cabs

    If I understand correctly, the only ultra-res-cabs around are the 10 OH cabs. I think you must buy the cab-lab program to convert to ultra -res. But as you probably know you can not convert the stock syx-files to ulltra-res. You gotta have longer wave or aiff files to start with.
  16. T

    Preset leveling using Waves Loudness Meter

    This is exactly why it is pointless to argue with people that can not read what I say. I Said a cranced poweramp. I did not say a clean amp of course. What ever you say about this I know that a 1v signal will not be near a 0,25 v signal i Loudness. Why waiste time on this forum anyway.
  17. T

    Mesa Mark I

    True , but princetones looked like all other fender models with reverb (in the preamp) . The bassman-transformers were just to get more power (Not a bassman sound) . Higher current (maybe some voltage to ) and also different load imp for the powertubes (from 6v6 to 6L6).
  18. T

    Mesa Mark I

    Well , the mark 1 was actually a fender with an extra boost stage before the first "stage"(with a slight modification in the reverb mix-stage) . It also had a master volume after the reverb mix stage . Most fenders: blackface, brownface, silverface, had the same preamp schematic. I guess you...
  19. T

    Preset leveling using Waves Loudness Meter

    Yes ! I had a suggestion that all amps should have the same output-level when the "virtual-poweramp" was cranced. That would make things easier (same reference) when using it together with music. But some smart-ass told me that a 100 watt sim had to be louder than a 20w amp sim. I decided to...
  20. T

    Firmware 13 BETA Feedback?

    Oh sorry . I should have mentioned that I ment IR WITH several hundred ms lenght.
  21. T

    Firmware 13 BETA Feedback?

    Well , since I personally tested with daw ir plugins with 24 bit resolution and 44,1 kHz 48kHz sampling frequenzy without hearing any remarkable difference I don't think anybody should expect any magic.
  22. T

    Who Wants to Test Some New Firmware? (12.03 Beta 5 UPDATE)

    Well that cathode bias stuff felt real on the vox modell. Now It sound as nasty as a real one , I think. But I´m a little surprised that it wasn´t modelled before.
  23. T

    Who Wants to Test Some New Firmware? (12.03 Beta 5 UPDATE)

    The link seems fucked up . Can somebody send it as a message ? 12.03
  24. T

    Something Cool I've Been Working On

    If that's true it means that the axe ir Works different than convlotion reverbs. That would mean that it could be worth using Other impulse-applications in my DAW to get The time domain information as well. Even if the "tail " is 20ms it still should Sound more interesting than just an eq...
  25. T

    AXE-fx-II to big

    Ok ! Good idea .. What dimensions on the cabin bag is allowed. I must have space for my high 70s shoes, my g lab midi board, Stage clothes as well. The axe is allmost 50-38-10 cm. I think I looked impossible to me at first try
  26. T

    Something Cool I've Been Working On

    I think you are wrong. If there was no decay in an ir we would be using Eq instead.
  27. T

    AXE-fx-II to big

    I´m going on a tour to the us (from sweden). The band don´t want to check in their stage equipment and allways bring everything they need, for the show, as handluggage. Unfortunally I discovered that I can´t bring the axe-II because it´s to big to fit in a bag that´s small enough for that...
  28. T

    Something Cool I've Been Working On

    Is this the average frequenzy response for the whole response (1000 samples) ? I always thought that frequenzy response was different at different times in the response. Like in a reverb-tail ..
  29. T

    Tonematch observation

    Well , I guess the tonematch is sort of a matching eq. You probably should use the string you you are gonna play for reference.
  30. T

    Help , no axe input device in logic !

    Ok ! No help ? If I remember correct there were a lot of guys running os x 10.6.8 that had issues with old and new drivers.
  31. T

    Help , no axe input device in logic !

    A friend of mine installed the new usb drivers before he knew that it wouldn't work with os x 10.6.8. He followed some instructions from this forum how to install the old driver again. It works for the audio out but not for the audio inputs. There is actually no "axe fx audio input"...
  32. T

    Global reverbmix do not work on 11.03 (solved)

    I be damned ! You were right, now it works. Thanks ! Have this scale been from -50 to +50 all along really ?
  33. T

    Global reverbmix do not work on 11.03 (solved)

    -50 %. I will test again.
  34. T

    Global reverbmix do not work on 11.03 (solved)

    I think It should only affect the reverb-blocks that has the global mix-box checked...
  35. T

    Global reverbmix do not work on 11.03 (solved)

    In my axe I turned down global reverbmix to zero, and the reverbeffect didn´t even decrease one dB. It should turn totally dry I suppose. And yes , the globalmix-box in the reverb-block is checked. My reverb-block is a global reverb-block, if that could count for something.
  36. T

    Global reverbmix do not work on 11.03 (solved)

    That's all
  37. T

    Boogies sounds better in 11.03

    I think the mark´s sounds good again.. It didn´t feel right with 11.0 .Now it seems like it should. I think, anyway.. But. What´s up with the american ryhtm . Is the depth supposed to be at 7 on that one .It´s easy to change , if there isn´t something else that got wrong.
  38. T

    Change input impedance on the fly

    Cool ! I´ll try. Hopefully the treble booster is low imp, like a real hornsby skewes or something.
  39. T

    Change input impedance on the fly

    Does anybody know if it possible to change input impedance whithin a preset. Maybe when switching scene or to become lower when a treble booster or a fuzzface is activated ?
  40. T

    FW11 IIC+ vs Mark V-IIC+ - Not getting good results (Solved)

    Nope ! Slave out is the whole amp (from speaker out but lower signal voltage)..
  41. T

    FW11 - Having Low End Problems - where is it?

    82 Hz seems unlikely low for a 2-12 cab resonance. I'm not sure but your cab but my fender 2-12 resonates around 110-120 Hz. I messured the minimum current frequenzy.
  42. T

    AXE FX Recto Red vs real MESA Roadster

    An isolated track can be hard to judge. There is nothing to fit into ? A good idea to decide wich is good sounding is to use it in a songrecording. I have noticed that the axe can make the mix sound kind of weird when you add a couple of tracks. If I add a bunch of tracks done with real...
  43. T

    I'm I hearing things? Taking crazy-pills? Placebo effect?

    The input impedance setting can affect that if you have passiv pickups and go straight in.
  44. T

    EQ tips

    They still do.
  45. T

    What do you guys think of the audio quality using the 4CM method?

    I would never put a digital a/d and d/a converting unit in front of my amp. But that's me. It sure can't make the soundquality better. I like to have a real tube analog chain kind of rig when I 'm not using the axe. If I use the axe, it's another type of rig. Then i never mix it with...
  46. T

    EQ tips

    Why would we need more eq than the tone controls when we don't need it with a real amp ?
  47. T

    Cliff and/or the team: can you confirm that something strange is going on with V10?

    If the tuners eye is to the left instead of the right, try turning the tuning-peg (machine head) on the guitars neck to increase string-pitch ! :lol Sorry ! I couldn´t resist ...................... :D
  48. T

    OS X Driver Issue

    It would be a great option to be able to set playback levels. Like a sort of simple audio driver mixer. Because if you play back a normalized music file and start playing along it's hard to prevent output clipping. Also if you record guitar at near clipping it's hard to balance with...
  49. T

    Amp block advance parameters always set to same default?

    On the other hand that would depend on the preamp tube model you put in your amp.
  50. T

    Artificial sound in dirty Axe FX II soundclips..

    Ok ! :-) But what is bludo oja ?
  51. T

    Artificial sound in dirty Axe FX II soundclips..

    Yeah ! The axe dumbles have their pre tonestacks bypassed. The same goes for the fuschs amp. I don't like that bypass-business.
  52. T

    Layla

    Or what about this ?: Larry Carlton - Layla - YouTube Maybe a MK 1 and a 335 I suppose.
  53. T

    Does anyone know why the Axe2 doesn't have midi toggle CCs?

    I know what you mean but that won't work all times since it depends on the stored state of the effect and the first value of the toggling footcontroller. This will only reverse the relationship between the two cc values , right ? The idea with built in toggle commands in the axe is that...
  54. T

    Tips for Mid-Gain "Warmth" in V10?

    I personally think those amps aren't very good choices fo a warm sound. I discovered that if you turn off saturation on the brit brown it gives a pretty warm sound immidiatly.
  55. T

    Does anyone know why the Axe2 doesn't have midi toggle CCs?

    It's a good function that would have to take place in the axe. But I guess we might need three options for every effect. An example: Cc 100 chorus on Cc 101 chorus off Cc 102 chorus toggle (change state) Sometimes (different scenes) you might want to send an absolute value. For example...
  56. T

    Can someone please explain ghost notes and the B+ settings

    When several notes distort together a lot of intermodulation products is being created. Among those is the differens between some of the frequenzys. Try to bend an A from the 8:e fret on the b string while holding a A on the 5:e fret om the 1 st E string and then let the bended note sink a bit...
  57. T

    Mesa Mark-based Amp models

    Yepp ! I had lots of mark amps before and now they finally don't need eq in the axe . Also try the usa pre yellow and turn on sag to activate poweramp. That gives a real good mark series amp sound as well
  58. T

    Does anyone know why the Axe2 doesn't have midi toggle CCs?

    I have wished that function in a thread before but as usuall, nobody agreed. That would be a great function because the axe allready knows the current state of all effects. I don't think everbody want's to use the mfc every time. But I guess there is some disadvantage with it since they...
  59. T

    Tonight first gig with FW10

    Yes ! It´s really an easy setup if you got the mfc. Just a data cable and an exp pedal into the pedal and you count in next song. Allmost any way.:D I must check the levels between different amps:D a little more but thats a minor problem.
  60. T

    Creating presets that sounds good direct, and thru a real power amp and cab?

    In what way does it sound wrong through your real cab ? to bright ? to bassy ? to boxy ? or what ? Why not start in the other end. Tweak the amp with the real cab first. That must be the most natural way. The plexi 100 treb sounds great through my real cab if I set it to default...
  61. T

    Tonight first gig with FW10

    Now two gigs have been done . Only used real cabs and not even any mics. Before I used to ask myself if the axe really felt and sounded as alive and good as a real amp. I really wasn´t sure. Now (FW10) I don´t have to ask that question anymore . Because finally I can feel the sound through my...
  62. T

    Quick question about master volume and preamp volume. please help

    Mastervolume and preampvolume is the same thing. It determins how loud signal is being sent into the poweramp. Output level is after the master and will not color the sound .I does not exist on a real amp. I guess you know that there also is an preamp gain wich controls the amplification in...
  63. T

    DAW Levels Low

    The output knob does not affect the digital usb level. So i doesn´t matter where you set it. I´m not shure how the utility level is scaled but I guess 75 % could be -15 or -10 dB wich is pretty low rec signal. The only thing I know is when the red digiclip led lights up you clip the a/d...
  64. T

    Tone experts, need your help..

    That's what I thought as well. That ain't no lonestar sound. I have them both. Stilletto and lonestar. The stilletto is a little different from many amps. It's sort of between a jcm800 and a Rectifier but with a narrover spectrum. A little midrangy in a way. But through a pa system it never...
  65. T

    Tonight first gig with FW10

    Jag har lirat i Norge förr om åren men vet inte riktigt vart Ålesund ligger...
  66. T

    Tonight first gig with FW10

    Fniss ! Fler svenskar än man kan tro på detta forum ..................:pride:
  67. T

    Tonight first gig with FW10

    Ha ha ! Well , Borlänge Sweden
  68. T

    Tonight first gig with FW10

    :encouragement: Really looking forward to tonight and tomorrows gigs. I will explore how the new firmwares sound will blend with the band at live levels. Gonna drive a 1-12 cab and maybe a 2-12 with the matrix and probably connect the axe direct with some cab sim to the PA. It´s allways nice...
  69. T

    FW10 Holy crapper

    I have no idea. Mine sounds great through real cabs with poweramp. I put the tonecontrolls flat and dialed out the treble with hi cut o 3 a clock gain at 2 a clock. Sounds great with a SG with p90 s . The IR business is a deal of it´s own.
  70. T

    Anyone using a buffer in front of the Axe-Fx?

    Well , I have used a boss tuner in front of the axe, before I bought the mfc. That is the same thing. It works as good in front of the axe as in front of any amp, keeping the treble intact with a little help from the low impedance . I don't like long cables before the buffer though.
  71. T

    Could someone please give me some advise for the behringer fcb 1010

    The uno chip is only for the toggle function. Otherwise you need one pedal for on, and another one for off. If i remember correctly. Also, I think you can write (but not read) to the chip directly from the axe, but I'm not sure.
  72. T

    USA Lead amp help!

    Well I be damned ! You were right. The usa pre yellow and green sounds great when you activate sag. They sounded like crapp before I knew they didn't have a poweramp sim on. In fact they sound like I allways thought a mark Amp should . I used to reconfigure the Power amp on my own...
  73. T

    USA Lead amp help!

    I usually dial in the amp with a familiar real cab before using Ir 's. Isn't there two versions. with and without the fat switch engaged. Have you tried both. I also think they sound a little upper midrangy and bass heavy at the moment. I won't be sure until next gig is done though.
  74. T

    FW10 Holy crapper

    That's why I wrote Blackmores sound .....:evil
  75. T

    FW10 Holy crapper

    Lots of Status Quo and Queen-albums for sure. Maybe older Jeff Beck but I'm not sure. Beatles albums I think also.
  76. T

    FW10 Holy crapper

    No ! I can't say I have tried the top boost tonestack in the axe. But I built it in in a couple of marshalls with succes. Treblebooster needs to be explored some more. I don't think the default setting is fat enough for me though. I takes some tweeking I guess.
  77. T

    FW10 Holy crapper

    This ac30 sounds just like blackmores sound on Down To Earth. At least through my matrix-poweramp and 4-12. Can'twait to the weekend gigs.
  78. T

    How to dial out harshness (V10)?

    I have to make the amp models work with my real guitar cab that I have decided to use. This means that there must be a "frequenzy-balance" in the amp modell itself. In that respect the IR business is of secondary interest. But of course it can be important for recording or line-situations.
  79. T

    V10 vs other modelers

    Well , that´s nice to hear that my ears still work. I don´t know what you mean with that the kemper sounds different before posting to soundcloud. But I tried to listen for some sort of depth and complexity and that´s what I believe I heard in the axe clips. Maybe the Kemper has less...
  80. T

    V10 vs other modelers

    With the marshallsounds I hope the first is axe 2. It seemed nicer. Also the dumbles I liked the first part most. Am I right ? :-)
  81. T

    Fender - finally!

    I use the brightswitch and turn down gain. Also down with mids and bass , up with treble a bit. At least for humbuckers. I play with the neck pickup and adjust B-M-T until the farting stops. If you are using cab-sims try 4-12 g12M-s to get a more open sound.
  82. T

    High gain with PAF?

    Yeah ! Most lower output pickups have a wider frequenzy-response wich can be impossible to get from something else. I think it´s easier to get desent clean and chrunch sound with them as well . If you need more gain and narrower sound you can allways use a fliter with gain boost. (Or maybe a...
  83. T

    Non FRFR rig - V10 Help!!!

    I tried mine in a matrix 800 and a lonestar 1-12 that I´m familiar with and did not discover any flubbyness. Maybe some brightness on the plexi high . I don´t know what kind of models you are using though. Gonna try it at a gig next weekend. I can´t say for sure until then . :-)
  84. T

    no complaining...just a question about "saturation"

    Tubeamps can produce higher frequenzys than you can hear . If you want to. Tubes are used in radiotransmitters.
  85. T

    no complaining...just a question about "saturation"

    Sounds like a guitaramp to me. Nothing strange at all. :-)
  86. T

    Question of proper AXE EQ values for amps that don't have them

    What about the lonestar that has a weird presence control wich is not located in the feedback loop ? Does the presence control in the axe simulate this passive post distortion tone control ?
  87. T

    no complaining...just a question about "saturation"

    Could this be a noise-gate-related issue ?
  88. T

    no complaining...just a question about "saturation"

    Why not leave it as it is (for a while) and try putting it to music and see how it blends. Maybe you will find out it´s better than fw9 in the end. :-)
  89. T

    Fw10 great but I'm a little confused

    Funny ! After a reboot and some checking of my monitorsystem it seems to sound as expected :-)
  90. T

    Fw10 great but I'm a little confused

    When I tried fw10 with real speakers it sounded very natural but maybe a little bright. I had to cut some treble on Plexi 50 hi and /13 and vox ac 30. When i tried it with cabsims in the studio it felt the other way around. The same amps felt muddier than fw 9. I tried a bunch of cabs...
  91. T

    V10 - don't know what to think yet

    I don´t get it ? If you turn down the bass and depth control to zero your sound is still to muddy ?
  92. T

    Can somebody inform me ?

    Thank you !
  93. T

    Can somebody inform me ?

    What is fractal-boot ? I can´t find any information about it.
  94. T

    Firmware 10 issues

    But the only thing in your presets that have changed should be the amps sound. If you adjust the amp controls to your liking you are done. I think you will be rewarded. :-)
  95. T

    V10 Firmware

    Cool ! That was quite a wait :-) This will be fun !
  96. T

    wet-dry-wet: modulation fx-volume too low...

    Maybe check global effectmix. But that's gonna change delay mix as well. A parallel (with a shunt)l mod effect might be best. (Mix at 100%) I think I always has to boost my serial delay and mod effects around +2 dBs to get bypass-balance right.
  97. T

    Recording in Logic

    Yes ! Mine to :-) I guess it's hard to know peoples age around here ! :-)
  98. T

    Recording in Logic

    I the old days we had a mixing console that sent signals to the monitors and to Logic. In that way we listen to the analog directsignal before it hits the computor. Nowadays there is directmonitoring, with no latenzy, in most soundinterfaces. That means we don't need a mixer anymore. The only...
  99. T

    Recording in Logic

    In other words, turn off software monitoring ! :-) (Or bring down the fader to zero while recording)
  100. T

    Dormant block in parallel makes it sound different...

    Set the mix to 100 % and bypass mute.
Back
Top Bottom