metal

  1. eduardosimoesneto

    How to make my AX8 better?

    I´ve seen a lot of presents sold on line, but I didn´t think they sound better than the ones from factory. I love hard rock and heavy metal bands. I love the guitar sounds in Anthrax, Dream Theater, Extreme, Metallica, Van Halen, Def Leppard (live). I specially like 5153 and Savageness. The...
  2. eduardosimoesneto

    Best Metal/Hard Rock sounds.

    I´ve been using the original Fractal AX8 presets to record some songs. I use: - preset 3-7 (5153 Red) for my heavier sounds. I search for a sound close to Anthrax, Testament, Sepultura, Kreator; - preset 3-8 (Savageness) for hard rock. I search for a sound close to Van Halen, Satriani, early...
  3. Arkks

    Metal/Djent Tones (9.04)

    Hi all. Once again been experimenting with some new rhythm tones. Let me know your thoughts. Arkks
  4. Jotun666

    Backstreet Boys - I Want It That Way (Metal cover)

    Hi, friends! I just uploaded a new pop metal cover and wanted to share it with you. It´s Backstreet Boys' I Want It That Way. I used a 5150 sim for guitars and SVT for bass. Also, Roland Jazz-120 for some cleans. I hope you like it!
  5. JAVIMARTIN13

    8 string metal - TS808, Friedman HBE, German Boutique+Orange

    Signal Chain: Skervesen Lizard 8FF with BKP Aftermath, Axe-FX II, DBX 586, Focusrite Scarlett, DAW
  6. SteveFireland

    New video from my band - AX8 content

    Recorded in my home studio using my AX8 and my Jackson KV2s and KV4 with a variety of EMG pickups. I'm using the Das Metall and 5153 50W Blue models, with the Cali cab. I preferred the guitar sounds before mastering, to be honest, they definitely lost something in that process, but oh well.
  7. eduardosimoesneto

    Hi Gain Metal Presets (Mesa Boogie and Diezel)

    I love my AX8. But the Mesa Boogie and Diezel presets that came with it are not my favorites for heavy metal. Where can I find some good metal presets? If they are free even better...
  8. Jotun666

    Mauser - Colgar Al Ladrón (Hang The Thief, some Thrash metal)

    Hi, friends! Some Axe FX II action here! I´d like to share my latest audio and video production at Jotun Studio: Mauser´s Colgar Al Ladrón (Hang The Thief). They are a local thrash metal band from Seville, Spain, and I took care of the audio recording, mixing, editing an mastering and also of...
  9. J

    Question for Friedman HBE users!Tosin-Abasi esque tone [patch included]

    Hi y'all :) , I have been trying to get rid/reduce the harmonics/pick attack when I am doing the legato run on the following clip: https://soundcloud.com/user-468226403 . I am using Friedman HBE . Patch included Any tips to improve the current preset? I have attached the clip and the preset I...
  10. Alexander Almanza

    Any Meshuggah or Fredrik Thordendal fans out there??

    I was scrolling through my IG feed and i found this. I was kind of blown away because they did a documentary for koloss and they were exclusively use the axe. Any ideas on what changed?
  11. Fredman Digital

    Fredman tones (Bring me the Horizon, In Flames, Architects etc)

    Finally you can get your hands on my Axe FX II collection of presets! They are exclusively tone matched based on a range of various artists I've produced throughout the years, like: Bring me the Horizon, In Flames, At the Gates, Architects, Hammerfall, just to name a few. All patches are...
  12. A

    My first recording with the AX8 (metal)

    This is an old song I've been wanting to release for ages but never got the mix quite right. Now I'm sufficiently happy with it and just glad that it's out there. For the rhythm guitars I used 5150 on one side and a Diezel on the other. Both through some cabs from the ML Djent pack. Bass...
  13. Arkks

    High Gain Test

    The latest firmware is pretty good. Heres what I've been working on... Arkks
  14. Arkks

    Prog Metal heavy tone test (Friedman HBE V2) 9.02

    Hi guys just a quick little test of the my latest heavy tone using the Friedman HBE v2. Let me know what you think. Arkks
  15. Andrea Maccianti

    Iron Maiden - Stranger In A Strange Land (Guitar Solo)

    My humble tribute to the great Adrian Smith on Iron Maiden Stranger In A Strange Land from Somewhere In Time. I hope you enjoy! :) #uptheirons Here I used my Stranger In A Strange Land Patch I recorded Rhythm guitar on a single Stereo Track. So NO Double tracking. Same identical thing as for...
  16. Detch

    Deathcore mix, Angle Severe 1 + Ownhammer

    Yea, it's metal again :) Recently I finished mixing this track. For re-amp I used Angle Severe 1 model + Ownhammer HHC II 412 EDVH with V30 cab which is EVH 5150 III 4x12 cabinet DI files were good but had some low-end mud issue so I used two filters at the beginning of the chain: With...
  17. andrémusic

    New Track - Guitars & Bass recorded with c2aye patches

    Clean guitars - Sithu Aye Clean - PRS 7 String Rhythm Guitars - Monuments patch - PRS 7 String Leads - Sithu Aye Lead - PRS 7 String Bass - bassguy - Fender Jazz Bass
  18. Joshua Thornton

    Mix-Ready, Mutli-purpose Metalcore, Djent, Hardrock Preset

    This is the exact rhythm/lead preset I currently use with my band, Alive In The Night, both live and in the studio. I have owned my AX8 for about a year and have tweaked this preset multitudinously since joining the Fractal community. Originally molded to fit the sound of my Reverend Sensei Ra...
  19. Milco

    Chicken Pickin Tone

    Hey guys, working with some new sounds, trying to blend synth and guitar. Made this super attacky clean tone to compliment the bells. What do you think??
  20. Fenris

    Terra's Theme - Final Fantasy VI (Quantum 9.02)

    Rhythm guitars are Recto2 Red Mdrn and Leads are USA Lead Brt+.
  21. Milco

    Milco - Spanky Distortion Tone!

    Really spent some time dialing in this spanky distortion tone! All Axe FX 2 in this one. Let me know what you think!
  22. SlugAlex

    Noob to High Gain Tones, Need Help!

    Hey whats up! I haven't posted in a while here, but I have been needing some help, and this forum has always been great to me! So I have owned an AXE FX II for a while (Loved it so much), but was forced to sell it. I currently own a Line 6 Helix, but have been itching to get me an AX8. Non...
  23. Milco

    Coil Split Distortion

    Really wanted a spanky tone for this intro. Split my Dimarzio Ionizer pickup and put it through the friedman amp and blam! I'm pretty happy with how this tone turned out. Let me know what you think!
  24. Guitarjon

    Some epic metal with asian influences

    Hey guys, Here's another new song. I used the Das Metal amp. It's such a cool amp model for big crunchy tones. I used an OwnHammer IR again from the Heavy Hitters Collection 2. It's an Emperor 4x12 IR with the C65 speaker option. Works great for (modern) metal. Hope you enjoy!
  25. egyptisgod

    5153 Metalcore Bass Preset

    I made this insane metalcore bass preset. You should put cabinet block next to amp block. This preset originally used "ML Zilla Misha V30 Tight. Please give it try. Thank you.
  26. Moshermax9

    NAILS Tone

    I'm look to get a tone similar to the band NAILS. I have done some research in what he uses mostly uses if im right a peavey 6505+ because he is endorsed by Peavey plus a signature pedal by dunwich amps "THe tyrant". Which is basically a HM-2 Clone. I've achieved something similar using the...
  27. J

    Suggestions for headphones/FrFr/Studio monitor

    Hi all, I have checked some of the other posts, but they are pretty outdated now.So had to create a new one. I live in an apartment and can't get too loud. My budget is around $200. I was planning to go for athm50x headphones and it is going to be mainly used for recording and...
  28. J

    Suggestions to improve this tone. Any advice appreciated (Sweep/Cafo tone)

    Hi everyone, I have been reading a lot of posts about getting tight bass sound and about recording on this forum. It has been really helpful and just wanted to thanks everyone for their input. Now onto the issue at hand, I am trying to record with my Axe XL+/ Logic x and output going to my...
  29. Andrea Maccianti

    "A.M BOGNER FISH" PATCH

    "A.M Bogner Fish" Patch. Has 6 Scenes. Available also for AX8. Ready to use. This demo I want dedicate to the great Scott Ian of Anthrax.
  30. Rylan Woodall

    Rate my Metalcore preset

    Hey guys! I just put together a quick preset and wanted your opinions. I am going after an All That Remains tone, which also applies to most metalcore. If you would rather not comment, just answer the poll yes or no. Check it out and please let me know what I can improve on, as I am trying to...
  31. Milco

    Thump of Doom

    Hey guys, here's a tough thumping riff I made for my E.P. Split coil really helps with the Fryette D60 as well as some multiband compression! Let me know what you think! How have you made a similar tone?
  32. Sunny12

    New Album - Crazy Solo Playthrough \m/

    Hey guys, Been a while but here's a (pretty hectic!) solo from my band Prospekt's new album released next week - completely recorded with the almighty Axe FX and mastered by Jens Bogren! :) Hope you enjoy and thanks for watching! Cheers!! Lee
  33. progmachine

    For all of the metal & djent fans out there! (Friedman + ML "USA Djent" IRs)

    Hey everyone! Here's some riffs I made to showcase ML Sound Lab's new cab pack! I really enjoy the mid-range in these bad boys! Hope you enjoy! Signal flow: Tape DIST -> Friedman HBE -> USA Djent IRs!
  34. E

    Tones coming out muddy

    Hey guys, Total newbie to the world of FX modelling, so please excuse me if I come across as a total burk! I picked up my unit about 3 weeks ago and I'm trying to model some modern metal tones (think northlane, monuments, etc.) However, no matter how hard I try to EQ, the tones just seem to...
  35. Shredder3386

    *Metal Content* New Single (with special Guests) All Axefx XL+

    Hey guys, I finally completed the first single off of my upcoming EP "At Winter's End." As expected, all the guitars and bass were AxeFx :). I used my favourite model, the 5153 Red with a custom amp sim I created. The track is called "I've Seen It All" and features Tim MacMillar from Protest...
  36. P

    New EP - Axe-Fx 2 Reamp...no USB or load box.. FFO Protest The Hero/BTBAM

    I mixed my friends band Tiberius. The EP is a free download and they have merch up on bandcamp too. Mix info: Used Axe-Fx 2 on firmware 4 for all the guitars. Basically fed my instrument out into the back of my interface. No noise/no distortion/nothing. Worked perfectly and saved me any hassle...
  37. emilotep

    Metal Album Released - All AxeFX

    Hey! Just released our band's new album. It's some kind of punky Death Metal. Guitars and Bass tones are all AxeFX. Mixed and mastered by me. This is the opening track: Don't forget to hit us up on facebook or instagram if you like it, or follow us on soundcloud! :-)...
  38. Jotun666

    Ariana Grande - Side To Side (metal remix)

    Hi, friends, I just made a metal remix of one of Ariana Grande´s songs, Side To Side. I cut some Nicki Minaj parts, since I didn´t like them at all, hahaha. All guitars and bass were recorded using Axe FX II. I hope you like it!
  39. Milco

    Taylor Acoustic Tone Match

    Hey guys, made this tone after messing around with some Taylor guitar recordings I did at Guitar Center. I blended it with the USA Clean Amp and some parallel reverb and delay. Let me know what you think!
  40. progmachine

    Arch Echo - Hip Dipper (instrumental prog jams)

    Hey All, My band just released a new single today! Let me know what you guys think! :) The mid and hi-gain guitar tones are Friedman HBE. Mixed by yours truly.
  41. progmachine

    Metal Jams + new drum VST !!

    Hey everyone! Here's a pretty straightforward metal clip I made - just 2 rhythm guitars panned L & R, bass and drums. Let me know what you guys think! Guitar Tone is Friedman HBE + FAS Modern I with VERY low input drive and the ML Cab Pack 13! Bass tone is the SV bass with the Fat Rat OD. Enjoy!
  42. Jotun666

    Orange Viper - The Beast (stoner metal)

    Hi, folks! Here you have my latest work at Jotun Studio: Orange Viper´s The Beast, from their forthcoming EP Freedom Of Choice. As they make metal mixed with stoner we used an Orange sim to get a powerful but "dirty" sound. I recorded, edited, mixed and mastered the whole EP. I hope you lke it!
  43. Milco

    Acoustic Tone Match

    Hey guys, wrote this piece after making a new tone with the tone match block. I ran an acoustic sample from Opeth and this is what happened. Let me know what you think!
  44. Jotun666

    Son Of Sorrow - Faith In Extinction (gothic metal)

    Hi, friends! I just wanted to share my latest work, Son of Sorrow´s EP Faith In Extinction, where we recorded all guitars and bass using Axe FX II. I took care of the recording, arrangements, editing, mixing and mastering. This is the title track, but you can listen to their full EP at...
  45. Milco

    Coil Split 8 String

    Hey guys, I used the single coil middle pickup with my coil split bridge humbucker to come up with this tone. Also the Fryette D60 helped a lot of course! Let me know what you think! Also send me music that has similar tone if you know of any!
  46. Guitarjon

    That baritone roar and juicy leads!

    Hi guys, I recently finished this video featuring the Axe FX XL+ and the OwnHammer 412 Recto IR's. I really dig how this baritone guitar sounds with the Axe FX. That big mid range roar is present in the rhythm parts and the lead solo part with the neck pick up has that warm juicy round solo...
  47. progmachine

    Riffin' out - Trying out new Rhythm Tone

    Hey all! I wrote some new riffs to try out a new rhythm tone of mine as well as the GGD Halpern Drums update! Enjoy!
  48. Andrea Maccianti

    Dimebag Darrell "FLOODS" (OUTRO GUITAR LESSON)

    I received a few emails after my Floods video where I was asked to do a lesson on the Outro Section. This is my first Guitar Tutorial. For any questions I am here. Hope that help! ***PLEASE SUBSCRIBE!!!***
  49. A

    FW 6.x and 7.0 American Style Metal tune

    All Recto2, Leads were recorded with firmware 7.00 - What an awesome update!
  50. shaunb

    Heavy Rock blind tone comparison - pre-production tone test UPDATE: results and presets added

    Hi guys and girls. This is a tone test I did to determine which amp presets to use on the recording project I've got underway. I'll have an album or a couple of EPs out this year. I didn't intend to post this as it was just a decision making tool for my process, but I thought it might be...
  51. DTS

    Demo: CloudCity (Q7, Ambient, progressive metal)

    Building up songs for the upcoming EP and this is one of them. Will have minor changes in the final mix. Gear: Axe FX II Chapman ML-7T w/ BKP Blackhawks Ibanez K5 Bass Steven Slate plugins
  52. Detch

    Friedman HBE V1, in one of the heaviest tracks I mixed

    usually for this kind of stuff I use standards like 6160 or DasMetal, but for these guys I went for Friedman HBE v1, and oh boy how cool it turned out to be! It gave that required tight sharpness and djenty feel. very cool
  53. progmachine

    Absently - "Dayzed" Guitar Playthrough (FAS Modern + Friedman HBE)

    Hey all, Finally got around to filming a playthrough of one of my instrumental songs again. The guitar tone is just FAS Modern and Friedman HBE combined with ML Cab Pack 13 :)
  54. Alberto Menezes

    Animals as Leaders - CAFO Full Cover with AXE FX II

    Hey guys! Two buddies and I made this full cover of CAFO, let me know what you guys think of the tones! Cheers!
  55. Sacha

    Metal Instrumental featuring Andy James - Q6, ML IRs, GGD Drums

    Hi fellas I made a new track and my buddy Andy James was nice enough to lay down a solo: Checkitout!
  56. kisslorand

    Synethic - Burned Out (AxeFx II Q6.01 content)

    After a short pause (2 years) here's another fresh track from my band Synethic. Guitars and bass are AxFX without any post processing.
  57. progmachine

    Heavy Jams with the PVH 6160

    I've been jamming with the 5150 model lately -- for some reason I avoided using it until now, and I love it! Here a quick clip I made with it! IR is from the ML Zilla Cab Pack!
  58. progmachine

    Hard Rock / Metal Demo! (Friedman HBE + ML Sound Lab Beta!)

    Hey everyone!! Here I'm demo'ing out a new mix template I made (a starting point for my new songs) and I included a new ML IR coming out soon that I immediately loved! Signal chain: T808 -> Friedman HBE (Original) -> Brit II -> Mr. Computer EDIT: The IR is the one from the new Brit Pack by...
  59. ProgressiveRocco

    Unreleased Song (feat. Archie Wilson on vocals) | KSE/Breaking Benjamin vibe

    Demo from around 2013 I believe, part of a project that never saw the light of day...I always thought it sounded like a cross between Breaking Benjamin and Killswitch Engage. My buddy Archie Wilson from the UK killing it on vocals as usual! Guitars and bass are all AxeFx2 (If I remember...
  60. Arkks

    METAL/AMBIENT/LAYERED GUITARS

    Once again experimenting with new tones. Bit of a mix with heavy and clean guitars throughout. Let me know your thoughts. ARKKS
  61. JeremyRhoades

    Quantum 4.0 Periphery Inspired Djent/Metal/Rock

    All sounds by Axe FX II, Superior Drummer 2, Slate plugins, and Reaper. Used mainly Dual Rectifier and Friedman models, with some FAS Crunch and a couple other amps for cleans. Any constructive criticism is appreciated! :)
  62. heanjurrera

    [Tele + Euro Blue Modern] Berserk 2016 opening cover

    Hello! This is an instrumental cover of 9mm Parabellum Bullet's Inferno, which as you may or not know, served as the opening song to the 2016 Berserk anime adaptation. This song was by far my favourite thing related to this show, and I figured I'd share my jab at it since it's been awhile since...
  63. Symbolic

    Guitar Licks Every Day!

    Hello, guys! Every day you can find a new catchy lick on my channel! Not very complex, not very trivial. No useless talk, just small pieces of useful stuff. If you like it - subscribe, share and press "like" button
  64. M

    How Many Watts Do You Actually Need? PA Speakers

    Hey guys, I've made a few posts here already in preparation for my AX8 which just got delivered a few hours ago! So a question I'd like to ask in regards to amplification is how many watts do you actually need? At the moment I'm looking into the Mackie series and am having trouble deciding...
  65. M

    Pros and Cons of Different Powered PA Brands/Models?

    Hey guys, I have an AX8 due to be delivered very soon and I still haven't decided on what speaker I want. My mind is set on a powered speaker, its just that it's hard to track down what certain speakers do best. The brands I've been researching are Mackie, QSC, JBL and Yamaha. I only want one...
  66. progmachine

    Rock & Metal Bass Tone Tips

    Hey people! I hope everyone is enjoying their day/night! I'm gonna leave this video here for anyone interested in how I get my bass tones (AxeFX II and the recent firmware)! I hope it's helpful!
  67. progmachine

    Rock & Metal Bass Guitar Tips!

    Hey people! I hope everyone is enjoying their day/night! I'm gonna leave this video here for anyone interested in how I get my bass tones (AxeFX II and the recent firmware)! I hope it's helpful!
  68. Guitarjon

    Bass guitar tone preset tutorial video!

    Hi guys, I just uploaded a video about creating good pop/rock/metal bass guitar tones with your Axe FX and OH bass IR's. I hope you find this video useful! If you have any questions you can ask them. My replies may be a bit slower than usual because I'm currently on a holiday in the south of...
  69. progmachine

    The Contortionist - "Arise" (FAS Modern + Friedman HBE)

    Here's a cover of "Arise" by The Contortionist! I had a lot of fun learning this and their guitar-work is very inspiring to me! Enjoy!
  70. axl009

    PRS Mark Holcomb SE Heavy Tone Test with ML Zilla

    Hey all! I wanted to test out my new guitar and the new ML Zilla pack that was released. Let me know what you think.
  71. Guillaume Lortie

    live rehearsal with AX8 07-24-2016

    Hi fractal bros! i'll be live with my band tomorrow at 2PM East Time on youtube with my AX8. we're a over band ( for fun ) that do small bars and festivals. you are all welcome and feel free to comment on my tone as i always want to sound better.
  72. Folelser

    Modern Metal Sample

    one year without my axe fx , he is back again , so , here is a little sample.
  73. ML SOUND LAB

    I love/hate noise gates... (YouTube video)

    Haha... I'm coming out, I haven't used noise gates in years. Not for guitars and not in mixing either. I just don't like the sound they produce. Recently I've been wanting to try more gain to really dive into a more brutal high gain territory and in that case I think I may need a noise gate so...
  74. Kjaris

    Kartakou TS Overdrive into USA IIC ++

    I had the pleasure to demo a really cool Guitar pedal from Kartakou Amplification called the warmer overdrive. Here's the song I wrote for the demo with a cool solo in the middle. First time I've used an external drive pedal with my AxeFX II I used the new IIC++ model and am quite happy with the...
  75. Fenris

    GOJIRA - The Heaviest Matter of the Universe Cover

    Hi guys. I love this song so I made a cover of it. The problem is that I used a sound VERY VERY close to the original, so you can't feel my guitars. I uploaded just the guitars on soundcloud, but they are on the video too haha I used a 5150 III and 2 cabs, the 5153 Mix and the PVH6160. If...
  76. E

    New to Fractal Audio

    Hi guys, I recently bought an Axe FX Ultra and am loving it (playing downtuned metal/post-hardcore). The truth is that it's a beast of a machine and learning how to fully use it will take time. Wanted to ask a few questions that will help me get on my way. Answer all or a few - anything would...
  77. Julien Meirone

    Bass Metal Cover with Darkglass TM

    Hi guys, this week i have mixed the bass cover of a friend using my new TM of the B7K, let me know if you enjoyed this ;). Cheers
  78. JapsidoOdlde

    Das Metall + (2x12 Santiago EJ1250 and 4x12 Fractal GB M160)

    Hey guys, I haven't been active in this forum for a long time, but I recently tweaked a nice kinda modern metal / djent tone I wanted to share with you :) The signal chain is nothing special: Gate -> Comp -> Drive -> Gate -> Amp -> Cab -> Filter -> EQ -> Gate But the thing is (I know this can...
  79. Julien Meirone

    Blizzard and Metal

    Hi guys ! Even if we are waiting for a new firmware, the Q3.02 still sounds awesome for metal. I have tested some new cabs, let me know if you like it. Cheers guys.
  80. Guitarjon

    New video about (8-string) metal/rock guitar tones

    Hi guys, I just uploaded a new video about 8-string guitar tones. I think this video can also be quite useful if you don't own an 8-string but just desire very tight metal/rock tones. Some very cool new Ownhammer cabs are previewed here as well. More videos are coming soon! I hope you enjoy...
  81. M

    Nolly Drum Sample Test w/ Axe-Fx II & Dingwall

    Did a test with Nolly's Good Tiger drum samples along with my Axe-Fx II. Guitar is a Jackson soloist 7 with SD Blackouts Bass is a Dingwall ABZ. Check it out, lemme know what you guys think. Cheers.
  82. progmachine

    My new single "Dayzed" - FAS Modern / Friedman HBE + ML CP 13

    Hey everyone! I have a new single out that TheCirclePit kindly made a promotional video for! Let me know what you guys think about the tones/mix, etc. As mentioned in the title, the guitar patch for basically every guitar sound is based around the FAS Modern combined with the Friedman. I...
  83. alexwald

    How to set up noise gates for a high gain patch?

    just curious what's your strategy for setting up the input noise-gate and the noise-gate block. I have a EVH 5153 head and use a overdrive block in PRE, and have a noise-gate block in POST. I'd like to be able to bypass the noise-gate block for clean channel, so it should take care of most of...
  84. Julien Meirone

    Doom 4 - Metal Cover Video (Q3.02)

    Hi guys, I just tested the new Q3.02 and tried to achieve a unique guitar sound and i must admit that we are pretty happy with the result. The axf II become more and more polyvalent, love this :). Please enjoy guys.
  85. Tyler B

    great day to record a new metal video [speed,thrash,death,prog]

    The sun was out and i couldn't resist making a video. I've been fortunate enough to have a lot of time to practice lately and focus on my band, i can't really define the genre, it's like anything else just an amalgamation of my favourite bands from over the years. Let me know if you enjoyed it...
  86. Julien Meirone

    Metal, Sea and Sun

    Hi guys, this week i tested new type of metal sounds with the Das metal et the JVM 410. Let me know what you think of that ;) : Cheers
  87. Julien Meirone

    Comparison Bias/Axe FX II with rectifier presets

    Hi guys, Obviously Bias can't sounds as good as the axe fx II and both devices don't have the same price. Here the idea with this test it to show how fast you can achieve a good sounds with basic rectifier presets. You can also use this sound as an argument for those who think that bias...
  88. sk8te4free7

    7 string Q 2.4 Friedman HBE

    Just another simple song idea using my ProTone Bulb signature pedal with an iBanez S Series 7 string. My mixing and mastering isn't great but it's definitely better than what i've shared years ago lol all stock plugins within Pro Tools 11.
  89. emilotep

    Swedish Punk-Metal Something

    Hi! So I recorded this little cover of a nice swedish indie-pop song, which I love, but always felt it could use some punk-metalcore attitude! :-) All Rhythm Guitars, leads, Bass, Ambient guitars are AxeFX (Rhythm and lead are the TripTik). Hope you like it, it was recorded and mixed in 2...
  90. Julien Meirone

    Dark Souls 3 Metal Cover on Q2.04 with Thordendal Modern

    Hi guys, i just released this new cover metal video with amps and effects that i don't habitually used like the thordenhal model or the pitch effect but i must admit that i am really happy with the result. Sometimes it is great to quit our comfort zone ;). Let me know if you enjoy it guys.
  91. Julien Meirone

    Born of Osiris - Bass Cover Q 2.02

    Here a bass cover of a friend that i have reamped, mixed and mastered. The Q2.02 is insane and now the axe fx II is awesome even for bass players :).
  92. Arkks

    New heavy tones (Quantum 2.02)

    Been experimenting with some new tones using 2.02 Let me know what you guys think. Cheers
  93. Julien Meirone

    Harry Potter - Prince's Tale [Metal cover]

    Hi guys, this month we decide paid a tribute to the great Alan Rickman on our youtube channel. Enjoy and share it (important to us). Cheers guys.
  94. J

    Killswitch Engage- My Curse Instrumental Cover!

    Here is an instrumental cover I put together of "My Curse" by Killswitch Engage. I'm going to see them live next week and thought I'd take a stroll down memory lane. These guys inspired me early on as a musician and it's great to see them still doing their thing! Guitar and Bass are 100% Axe-Fx...
  95. Vitali Bilinski

    Deftones - My Own Summer (guitar cover by Vitali Bilinski)

    My cover of the song called "My Own Summer (shove it)" by Deftones. Recording, editing, mixing and mastering by Vitali Bilinski. All the rights of the original song go to their respective owners. Make sure to leave your comments below and if you liked it, thumbs up and subscribe because there...
  96. Minotaurean

    Weird trippy metal/rock

    Check this out guys. All the guitars are 100% Axefx! This track will be on my band Inertia's upcoming album "The Process" this year :)
  97. Julien Meirone

    The Witcher 3 Metal Cover

    Hi guys, just like i said in a precedent thread, i made some guitars and bass reamps for the Youtube Channel Evilducky production and this time the mix is insane, chech this out ;) : I hope, you will enjoy it :). Cheers
  98. JapsidoOdlde

    Post Djent (Leafscape)

    Hey guys, I wanted to share this track with you, which I recorded with my band Leafscape. All guitars and bass tones are Axe Fx II, we used my Schecter KM7 and Warwick Rockbass for this Demo. The mix is not perfect at this point, but you´ll get an idea :) Hope you enjoy, feel free to ask any...
  99. Crapshoes

    Q1.05 vs Q2.00 Friedman HBE

    Description for the Soundcloud link: This is a comparison between Firmware 1.05 and 2.00 for the Axe-Fx MK-II XL+ The first sample is Q1.05 and the second is Q2.00 The amp in this comparison is the Friedman HBE, and the settings in all of the blocks within the preset are exactly the same...
  100. S

    Purchases to go with the AX8?

    Hello, After some consideration, I decided to go for an AX8 and am on G66's waiting list. Even though I'll keep my tube amp for a while, I want to use the AX8 with a FRFR monitor. So I have a few questions. 1) Regarding the "secondary" purchases, there will be a good cable (like the Humbuster)...
Back
Top Bottom