Search results for query: *

  1. macfly

    32.03 plays/feels fantastic

    Back to the OP, I wonder how many times we've said "it can't get any better," and then it does. This firmware is amazing...While I prefer my FM9 for gigging because it's easier to transport, I'm gladly gigging with the AxeFX because I am enjoying the sounds I'm getting more than ever...again. I...
  2. macfly

    Axe-Fx III Firmware 32.02 Release

    FWIW, I've just pulled presets from my FM9@fw11 into my AxeFX and did my first gig with it. It doesn't happen often, but our sound man noticed and mentioned how the guitar sounded amazing last night!!!
  3. macfly

    FM9 Firmware Version 11.0

    Its not a beta, tho it has kinda behaved as such for some of us ;) Glad I have an AxeFX to lean on for now...just copied my FM9 presets in and got them tweaked out. Gonna let the FM9 sit out until there's another update.
  4. macfly

    Copying FM9 presets into AxeFX?

    I've just done it using the import in AxeEdit. Thought I used to be able to do that with FractalBot, but at least I can still do it this way. Sorry for the stupid post!!!
  5. macfly

    Copying FM9 presets into AxeFX?

    I used to be able to copy presets from my FM9 to the AxeFXIII and vice versa. It appears we can no longer do that? Any workarounds?
  6. macfly

    FM9 Firmware Version 11.0

    Another problem last night on a gig...stepped on the switch for scene 2 in a preset and no output. Had to reboot to get sound again. No bueno. think I'm heading back to FW10, unless anyone has suggestions. This is two weird issues in three days.
  7. macfly

    FM9 Firmware Version 11.0

    I think this has been reported...maybe for a previous FW: last night I set up for rehearsal and ran Out 2 to the board for our IEMs. There was a LOT of noise and barely discernible signal from my guitar. Rebooted and problem went away. Any others? Any thoughts?
  8. macfly

    FM9 Firmware Version 11.0

    Great to hear, especially coming from you, Scott! My experience with FW11 has been the same (similar CPU and working flawlessly). I was reluctant because of conversations in here about problems, but decided to just dive in because I had a week off. I've been using it for a little over a month...
  9. macfly

    FM9 Firmware Version 11.0

    With the output problem, does a system reset make sense and/or have those experiencing this tried a reset?
  10. macfly

    anything inside FM9 to "re-seat?"

    I'm wondering if there are any ribbon cables or whatever inside the FM9 I should check to make sure they are seated well. I feel like I've heard that advice somewhere in here before. Twice now, I've encountered a ridiculously loud, intense out of control buzz/feedback. The first time I was only...
  11. macfly

    FM9 Firmware Version 11.0 public beta #1

    Isn't it cool that we're still getting quality upgrades amidst a new product rollout? I am impressed...again!
  12. macfly

    FM9 Firmware Version 11.0 public beta #1

    Not to hijack, but mine has to be 4.3%. is that odd?
  13. macfly

    In ear monitoring

    There are lots of ways to make IEMs work for you, and everyone's situations/preferences are different. I think it also requires trial/error and patience. It took us a few months...maybe even a year...to really figure it out. We started out with ambient mics and trying to get "studio sound"...
  14. macfly

    Plexi lovers... What other amps do you enjoy?

    Finally got back to the SLO100. Never loved it in FAS modelers before, but I used the SOLO100 DynaCab this time and it is glorious. Its very different from my other amps, so I hope it will work on gigs alongside them...
  15. macfly

    In ear monitoring

    It seems the reverse of that everyone else is doing, but somehow I've gotten into the habit of using Out 2 to FOH and Out 1 for IEM. Guitar to ears is stereo with an Enhancer block just in Out 1. I have a Shure P4M mixer that allows me to push the band mix a little to the left and guitar a...
  16. macfly

    Axe-Fx III Firmware 30.00 Public Beta #2

    I had a 50 metalface and an 810 cab back in the day. No trouble being loud enough...really cool sounding rig. Moving the cab in a car was a struggle hahahaha!
  17. macfly

    Plexi lovers... What other amps do you enjoy?

    Plexi 2204 is a new go-to for me. It reminds me of the clean channel in my first JCM800...a 4010 I think I bought in 82. As I understand it, the Fractal model is an 81 JMP 2204. It has replaced the SLP I was using. I don't remember seeing any conversation about it...anyone else using it?
  18. macfly

    FM9 Firmware Version 10.0

    Gigged with FW 10 this weekend. Digging the Digital Capo improvements! Probably not news to most but I haven't seen conversation about dialing it in. I have trimmed the low end in the pitch block (for me HP at 180Hz really helped tighten it up. Since the entire preset is devoted to the half step...
  19. macfly

    Just discovered the Plexis...what's next?

    Thanks for the tips and the video! Just tweaked Variac, sag and saturation...very cool!
  20. macfly

    Just discovered the Plexis...what's next?

    The preset I use for 95% of any gig (classic rock or country gigs) is JTM45 for clean and edge sounds, 1959 SLP jumped for crunch, and Friedman BE V2 for high gain and solos. For any of those, I use the Klon, usually with gain very low to goose them. I'm using DynaCabs: 4x12 Citrus/Dynamic 1 and...
  21. macfly

    Axe-Fx III Firmware 29.01 Release

    Just get one of these...why mess with guitars so much?
  22. macfly

    Just bought some EV PXM-12MP’s

    I think it has the factory fix. Its not noisy...bought it in Fall 2024.
  23. macfly

    Just bought some EV PXM-12MP’s

    I have the FR12, CLR and EV. Now I wanna try the Laney! Of the three I have, I prefer the EV because of size and ease of transport. To me it hangs with the CLR really well. My CLR is for sale...tho its a Neo, it still is kinda goofy to pack in my trunk and such. I keep the FR12 for gigs where I...
  24. macfly

    Just bought some EV PXM-12MP’s

    Lately I'm having great success in part because of upgrades in the FM9 and AF3, but also because I'm dialing in things first in my EVs, then checking with studio monitors. I was finding that I overtweaked when working in reverse order. Our sound guy says most rooms he doesn't have to do much if...
  25. macfly

    Axe-Fx III Firmware 29.00 Release

    "Your wish is granted...in advance!!!"
  26. macfly

    Axe-Fx III Firmware 29.00 Release

    Agree! I had dipped back into my FM9 but have returned to gigging (my band is called The Usual Suspects btw ;)) with the AxeFXIII with FW29. I mostly use the SLP but am spending more time with the JTM45 and BE as time moves forward. Both my guitar and The Usual Suspects are sounding great!!!
  27. macfly

    FM9 Firmware Version 9.02

    I see the soft reset feature now. Will get into that tomorrow! Thanks!
  28. macfly

    FM9 Firmware Version 9.02

    Same. I updated the FM9, then loaded my AxeFX3 presets (FW28.03) into the FM9 (FW 9.02) and they are working well. The presets sound like they do in the AF3, so I'm figuring I'm done. I have to remap some modifiers and stuff so I'll be editing and saving all the presets...I think that does...
  29. macfly

    Axe-Fx III factory presets for Firmware 28.02

    I don't know if there's anything new in it but I'm lovin the Captain Hook 2a today. My go to is the BE100 but been looking for something a little more classic rock and this is working well!!! Will probably work well for a blues band audition I may get in the coming weeks if my other two bands'...
  30. macfly

    Axe-Fx III factory presets for Firmware 28.02

    I sold a Custom Historic Les Paul Custom to get mine (and FC12). No regrets whatsoever.
  31. macfly

    Axe-Fx III Firmware 28.02 Release

    Agreed...Always a good sign when I load an amp and instantly LOVE it. That certainly is the case with the Brit Studio 20!!!
  32. macfly

    Difference in amps between FM9 (FW8) and AF3 (FW27)?

    It looks like FW8 for the FM9 and FW 27 for the AF3 are the same. I suppose I should just copy the presets from my AF3 into the FM9 and see how they sound.
  33. macfly

    Difference in amps between FM9 (FW8) and AF3 (FW27)?

    Regarding amps, is there something markedly different between the FM9's last final release (8.0, I think?) and AF3 FW27? I upgraded to FW27 when it came out, and things are sounding otherworldly. Thus my FM9 has been relegated to a dusty corner ever since. Apologies if this is just laziness on...
  34. macfly

    Dyna-Cab Suggestions

    FWIW I've gone back to DynaCabs. I've been accustomed to just using the same cab setup for all amps in my rig, but took @Karl Houseknecht 's advice and set up two TV cabs, one with ribbon and the other with dynamic 2. I'm finding its similar to the Legacy 103 sound I like, but with better...
  35. macfly

    Dyna-Cab Suggestions

    @Karl Houseknecht Cool! What are you using? Edit: Your point about fitting in the mix got my attention. Prompted by @austinbuddy's work, I chose Legacy #60 with some hi/lo cuts. Still has what I want to hear, but much better presence and clarity. Learning Benatar "Promises in the Dark" at the...
  36. macfly

    Dyna-Cab Suggestions

    I appreciate your suggestion. I tried that early on, and again since your post (and since I've had a lot more experience with DynaCabs. To me that is pretty good, but just doesn't have the same girth. I got closer using the condenser instead of Dyn 1--and it was damn close, but the single IR not...
  37. macfly

    Dyna-Cab Suggestions

    Pretty much what I was doing. Recto Straight def sounds best to me. I used two of them for many months. But it wasn't ever exactly right...I just haven't been able to replicate the sound of that Basketweave TV mix. It may just be that I used it for so long in the AX8 that its burned in my brain...
  38. macfly

    Dyna-Cab Suggestions

    I've just had an interesting experience: I fired up my old AX8 and was amazed at how good it sounded--immediately noticed it felt stiffer but the tone was awesome. Basically the same amp I've been using in my FM9 and AF3 but the AX8 was using the Basketweave TV mix IR whereas I've been using...
  39. macfly

    FM9 Firmware Version 8.01

    FWIW, I fought it for a few months...upgraded to FW7 and didn't like what I was hearing, so I dropped back to FW6 which I'd spent a lot of time tweaking. When I finally couldn't hold out any longer I loaded up FW8, reset my amps and started over with DynaCabs. End result is magnificent and it...
  40. macfly

    FRFR SPEAKERS

    I've been on an FRFR journey the last couple of years. I have recently tried the Fender FR-12, Redsound MF10, EV PSM12MP and Atomic CLR. In general, I find the CLR to be my all around favorite (sounded great immediately), but the FR-12 is really close at higher volumes with some adjustment to...
  41. macfly

    Device stuck on boot a few times tonight at gig (scary)

    I've recently had a problem with flaky power. FM9 worked fine...maybe sounded a little different but my Shure wireless kept cutting off. Can you guys recommend a conditioner that's not crazy expensive (or does that even exist)? I have the Furman M-8x2 and a Radial Power 1, both of which may, at...
  42. macfly

    FM9 Firmware Version 8.00 public beta 2

    Yes been using the preset with FW6 for months, but recently switched to the Brit Silver from the BEv2
  43. macfly

    FM9 Firmware Version 8.00 public beta 2

    Here it is. I read your reply to another above, and wonder if this is because I have two reverbs and a delay. I'm in the process of cutting the second reverbs out of my presets but have only done that for 3 of about 10 presets that I use. The other 6 that have that didn't freeze. It froze as...
  44. macfly

    FM9 Firmware Version 8.00 public beta 2

    I understand that "beta" means this is more likely, but after a week or so with no problems, I had three freezes on 8.1b last night. Guess I should have upgraded to beta 2, all on one particular preset.
  45. macfly

    FM9 Firmware Version 8.00 public beta 1

    You know the beta is stable when there's a full page of talk about coffee. :)
  46. macfly

    Slight difference, same presets in FM9 and AxeFXIII

    I didn't mean to re-start the thread from June 5. In that, and above, I read about some solutions including cab resolution (can't find that in DynaCab on FM9) and Reverb (both are same), as well as tweaking presence and high treble. I switched one of the mics and changed the low slope, and the...
  47. macfly

    Slight difference, same presets in FM9 and AxeFXIII

    Thanks. Crap. If an admin wants to delete this thread, please do. (I don't think I can?)
  48. macfly

    Slight difference, same presets in FM9 and AxeFXIII

    My AxeFXIII is at FW26. I recently upgraded my FM9 to FW8b1. I notice a very minor difference in presence, favoring the AxeFX. This is with the same presets/scenes, generally one is a 2203 and the other a JTM45. Anybody else notice this? FWIW, it's subtle enough that I didn't notice it until...
  49. macfly

    Update: Call me lazy...returned to FW 6 (now FW8!)

    Updated to FW 8 beta 1. LOVE IT! I kept reading all the glowing reports, mostly in the AxeFXIII section, so I updated my AxeFX to FW26 and copied my FM9 presets into it. With only a small amount of tweaking I was amazed at how noticeably better everything sounded. Ran with that a couple of days...
  50. macfly

    Update: Call me lazy...returned to FW 6 (now FW8!)

    Thanks for checking that. As @unix-guy mentioned, my preset was at 81%. On my next break, I'll try again...I've decided to drop my stereo presets and am going back to a less complex rig....hopefully that will give me all benefits and no costs!
  51. macfly

    Update: Call me lazy...returned to FW 6 (now FW8!)

    For me, in FW6 gapless is truly gapless; in FW7 its a hair slower...and as mentioned above, yes, in FW7 my main preset was at 81.
  52. macfly

    Update: Call me lazy...returned to FW 6 (now FW8!)

    From last fall with FW5 into winter with FW6, I built really nice presets and between the FW upgrades and DynaCabs, I've gotten the best sounds I've had since I've been using modeling. Up front, I understood that FW7 would change things. From the outset I noticed that gapless was less so, and...
  53. macfly

    FM9 Firmware Version 7.00

    Mighty quiet in here! Of course that means everyone is playing more guitar! A testament to this software, I'm recreating my favorite gig with much better success now. Most of my time with amps was using early JCM800s and the last 15 or so I was using a v1 breadboard Tim overdrive in front of...
  54. macfly

    FM9 Firmware Version 7.00

    I know and its fantastic!
  55. macfly

    FM9 Firmware Version 7.00

    Brit Silver! Starting sampling Marshall stuff and three hours passed after I dialed this one in. I dunno why but I really didn't like it until it was reworked but I still found that the others I was using (Euro Blue, BEv2, 2203 High) were winning out. I paired the Jube with a 412 Recto Straight...
  56. macfly

    FM9 Firmware Version 7.00

    I have a week off so made the leap to FW7. I backed up everything, then updated the editor and loaded the firmware, which went smoothly. I spent a few minutes re-leveling the amps in my main preset and then copied the block to most of the rest of my presets...the four amps in that block are used...
  57. macfly

    Axe-Fx III Firmware 25.00 Release

    Forget it...he's rolling.
  58. macfly

    Axe-Fx III Firmware 25.00 Public Beta (Cygnus X-3)

    For once in my life I'm happy to be less "in the weeds" than others. I used to tweak components in my real amps, but now with so many amps to pick from, I don't really need to do that much. Interesting that I have found the Euro Blue to be my favorite rhythm sound, paired with the Recto Straight...
  59. macfly

    Axe-Fx III Firmware 24.05 Release

    I know you're kidding, but once again I'm thinking "it can't get any better." Yet, I too am conditioned to look for something new. Its just gotten so amazing. What's left? Laney? Ampeg V4? Marshall 1990 8x10 cab? Or are they in there and I missed them? If not, can't we make them with existing stuff?
  60. macfly

    Axe-Fx III Firmware 24.05 Release

    Huh huh huh huh...you said wood.
  61. macfly

    FM9 Firmware Version 6.00

    Gigged with FW6 last night after using the related updates in the AF3 for the last few weeks. It worked great and sounded phenomenal! I was worried about all of the stuff I'd crammed into the AF3...that I wouldn't be able to transfer to the FM9, especially in my kitchen sink and one other big...
  62. macfly

    FM9 Firmware Version 5.01

    There ya go. Really glad to catch someone listening and appreciating. As posted above I can't wait for this stuff to hit my FM9, but that's not gonna speed it up.
  63. macfly

    FM9 Firmware Version 5.01

    Nice! Looking forward to trying this stuff out on the FM9...its gonna be worth the wait folks...my AF3 is sounding so effin good and gapless is the bomb! I'm even jumping between presets in mid song on occasion and it is fantastic! If I can squeeze these presets into the FM9, that will be awesome.
  64. macfly

    Let's show some love! What is the thing about the Axe3 that made you grin recently?

    Yeah man, is there a Nobel Prize for guitar gear engineering?
  65. macfly

    Let's show some love! What is the thing about the Axe3 that made you grin recently?

    OP, this is a great idea. I'll try to keep this short, tho I could certainly write volumes. 1. For the last two days, it's been this updated Marshall amp model. I have played constantly and can't put into words how much I've been enjoying it. It is the sound in my head. 2. Overall its the FAS...
  66. macfly

    Axe-Fx III Firmware 24.03 Release

    Sometimes we struggle with tone...pun intended.
  67. macfly

    Axe-Fx III Firmware 24.03 Release

    I already owned that cab pack and so based on your comments above I have been sampling cabs with Brit Silver. Thank you so much for weighing in here...I think this cab may have replaced my DynaCab and I'm pretty sure you've helped me create my new main amp/cab combination!!!
  68. macfly

    Axe-Fx III Firmware 24.03 Release

    Jubilee sounds friggin killer. I built a stereo patch with that as the main amp and depending on the scene, a 2203, JTM45, or a Twin in the other channel. I never can tell if its a matter of me learning more or the updates (and I'm sure its both) but everything sounds, dare I say, better than...
  69. macfly

    Axe-Fx III Firmware 24.02 Beta #1

    I'd imagine it doesn't need saying but 24.02b1 has been solid for me.
  70. macfly

    Axe-Fx III Firmware 24.00 Public Beta #2

    My AF3 had been collecting dust...FM9 is such a perfect size that packs a lot of punch. However, since these updates my AF3 is back at gigs. Its more weight and more stuff but so completely worth it. The sounds I'm getting now are pretty much perfect. I know the FM9 will end up sounding as good...
  71. macfly

    Stereo Vs Mono For Live Performances

    Despite the fact that I'm dabbling in stereo for live, I absolutely agree with all of this. 99% of the time I'm going to be working with a guy that is on board with the idea, and if it is ultimately not worth it for him, I'll ditch it for FOH. I'm also going to need mono versions of my presets...
  72. macfly

    Stereo Vs Mono For Live Performances

    I've just begun experimenting with stereo--never used it live before. I decided to do this because I'm the only guitar in this new band. For most of what we do, guitar and keys works just fine, but for some songs that are all guitar, I think there will be some benefits. Mostly I'm just using...
  73. macfly

    Axe-Fx III Firmware 23.05 Release

    I only go back to FX8 and AX8, but completely agree. I played our new band's first gig last night and was so inspired by the sound and feel of 23.05--I'm still using the same amps but they sound so amazing!!! THANKS FAS!!!
  74. macfly

    Wish FREQOUT pedal

    FWIW this pitch block works pretty well for me...I just modify the mix like this...all pretty simple.
  75. macfly

    Axe-Fx III Firmware 23.00 Release Candidate (Beta #6)

    Agreed. I'd guess that AF2 owners wondered how it could get better, but it has...so we're conditioned to want the next thing. I'm at a place of such excitement around what has happened in the last year with my AF3 and FM9 that I am considering NOT updating firmware, much less not thinking about...
  76. macfly

    Tips for filling out tones in a rock trio?

    Fair point!
  77. macfly

    Tips for filling out tones in a rock trio?

    Not trying to fix a bad guitar tone. What I’m doing is the same thing you hear on most studio recordings. Doubling guitars, vocals, snare drums etc is about creating subtle differences in the stereo field that make things bigger. It depends on what you’re going for…probably don’t wanna double...
  78. macfly

    Tips for filling out tones in a rock trio?

    I've just started a band and am the sole guitar, but we have keys. I still think stereo guitar will really help fatten the band up so I've created my first stereo presets, using two amps/cabs. I have a main amp/cab that occupies both channels (but panned slightly to my side) and then add a...
  79. macfly

    Anyone using the Multiband Comp?

    Yes, but I don't use them at once...sounds like that's what you're doing...just switching between them. If they are on the same channel, the gap is really minimal. Be sure to set Bypass Mode to Mute for both amps.
  80. macfly

    Anyone using the Multiband Comp?

    Yep, I've been using the BE for quite some time and it builds up low end with palm muting generally between E and D. That subtle change from -30 to -33 with the crossover at 120Hz did the trick.
  81. macfly

    Anyone using the Multiband Comp?

    I'm using it on my "kitchen sink," but had to make some choices. The MBC added about 10% CPU, so that put me at 85%. I had two amps and two cabs...kept the amps but reduced to one cab, and dropped the Multiplexer I had switching the amps. I have very little loss of features in the preset and the...
  82. macfly

    Anyone using the Multiband Comp?

    Upfront let me say that my learning curve has been steep with modeling, and I worry that I don't really have a great ear. So this post may be for people in my boat, and also for pros to help us find this kind of thing, or to suggest other subtle things to try with it. All that said, in the last...
  83. macfly

    Speaker recommendation and class recommendation for soon to be FM9 owner

    I have the EV PXM-12MP and Redsound MF-10. Each has its advantages. I think the EV sounds closer to my Focal Alpha 65s...not the same, not really "similar," but closer than the MF10. I've had great success dialing in tones by starting with the Alphas and then going to the EV to get a sense of...
  84. macfly

    Looking for ideas for the Perform Pages

    Thanks! I have been using the global eqs, but in the heat of the moment, with a couple of drinks in me, I think the Mesa EQ is gonna be much easier. Your Per Preset page is pretty similar to what I've done. Many of mine have two amps so I'll probably do G, B, M, T, P on the top and Drive gain...
  85. macfly

    Looking for ideas for the Perform Pages

    Over the past couple of years that I've been using the AF3 and FM9 I have set up a few things in "Perform" but never seem to use them. Thus I thought I'd ping the community to see what you guys find useful for gigging. My latest idea is to put graphic eqs just before Out 1 (my IEM) and Out 2...
  86. macfly

    Looking for ideas for the Perform pages

    Over the past couple of years that I've been using the AF3 and FM9 I have set up a few things in "Perform" but never seem to use them. Thus I thought I'd ping the community to see what you guys find useful for gigging. My latest idea is to put graphic eqs just before Out 1 (my IEM) and Out 2...
  87. macfly

    Big dummy when it comes to IR's looking for info

    If you get into the manual and the wiki and still need help, this is a GREAT way to understand how everything works! https://classes.coopercarter.com/
  88. macfly

    Dyna Cabs...why don't I get it?

    This is the mistake I made, and I think others are making: I tried to recreate my favorite IR. In my mind, I would get it identical, and then make it better. Essentially, you've already done that by picking that IR with professional mic placement and/or mix. Then we dial in the amp to get it...
  89. macfly

    FM9 Firmware Version 5.00 public beta (1)

    Thanks!
  90. macfly

    FM9 Firmware Version 5.00 public beta (1)

    Understood and thanks. I figure I'm gonna go back when the final release happens, so I'd guess it's no biggie either way.
  91. macfly

    FM9 Firmware Version 5.00 public beta (1)

    I'd installed the 5b1 yesterday and had no problems. Got up today, read the above couple of issues, turned in on and had massive white noise at out 2 and nothing at out 1. Reboot stopped it but I have a first rehearsal with a new band tomorrow so I've jumped back to 4.01. QUESTION: does that...
  92. macfly

    FM9 Firmware Version 5.00 public beta (1)

    Is this only happening on presets using DynaCabs?
  93. macfly

    FM9 w/ IEM

    Unless you are using an analog board, you should be able to tweak your monitor mix on a cell phone. Either way, my suggestion would be to find a Shure P4M line mixer https://reverb.com/marketplace?query=shure p4m Run the FM9 output you're sending to FOH through channel 1, and it has a "thru"...
  94. macfly

    Scene Controller Presence

    I just did this using a Plexi 50..I just bumped the mid and treble a little and got pretty close to the same sound. Just went back and looked at it, and I also added the fat switch. I did a similar one with the Small Box and didn't need to do much...just lowered the bass a little when I...
  95. macfly

    Axe FX or FM9?

    If you are just under 80% and you have a first gen FM9, maybe just get the FM9 Turbo? Then you have the other as backup...
  96. macfly

    Slide guitar preset?

    Sorry...not trying to hijack but if there's a preset called "Fat Man in the Bathtub" I need it! I am working on that sound right now!
  97. macfly

    Need startup help with FM9

    This is well worth it. Well organized. Best to follow in order, but also easy to go find a specific topic. As mentioned above, it'll get you up and running and then offer lessons on building specific kinds of presets (and you get the presets to use of course) and then tons of next-level stuff...
  98. macfly

    I Just Purchased Cooper Carter's Axe Fx III Class

    Another happy camper. I've been using FAS products (FX8, AX8, AxeIII, and FM9) for about 10 years now. Along the way, via this forum and a lot of youtube videos, I've learned a lot...this class showed me that, but also helped me realize a lot of stuff that either I didn't know existed, haven't...
  99. macfly

    Acoustic Guitar through the Axe FX III?

    In the Aura images, check out the Martin Roger McGuinn signature dreadnaught. GREAT sounding image!
  100. macfly

    I Just Purchased Cooper Carter's Axe Fx III Class

    OK thanks. Makes sense, and maybe I'll get the Axe3 class down the road. Honestly, I'm so happy with the FM9--so perfect for a weekend warrior cover band thing--I'm not sure the Axe3 will ever leave my house again!
Back
Top Bottom