Search results for query: *

  1. Stringtheorist

    Requesting help to recreate this auto-wah sound

    Thanks Yek. I copied your Filter block to my preset and tried it out instead of the wah. It is quite a similar effect but still doesn't get me there; in fact I prefer the Wah solution right now. In both cases the fundamental tone of each note seems to be too present in the mix. On the recording...
  2. Stringtheorist

    Requesting help to recreate this auto-wah sound

    Yek, I tried your wah and control settings in my own preset but it didn't get me any closer to the tone above. Had to change your LFO1A to Env in the Wah block controller settings also.
  3. Stringtheorist

    Requesting help to recreate this auto-wah sound

    Thanks. For some reason, I'm not getting any output at Out1. :/
  4. Stringtheorist

    Requesting help to recreate this auto-wah sound

    Is that preset 011?
  5. Stringtheorist

    Requesting help to recreate this auto-wah sound

    I'm struggling to recreate the autowah settings for Stevie Salas - Tell Your Story Walkin': Can anyone suggest settings for this? Right now I'm using a Wah block attached to Env, set to the following: Type: Funk Res: 10 Taper: Log 30A Drive: 0 (Global Envelope settings are all set to min...
  6. Stringtheorist

    Axe-Edit 3.0.6 Released

    Seriously? Damn. I wish I hadn't bothered updating now. This is really all I use Axe-Edit for!! :(
  7. Stringtheorist

    Axe-Edit 3.0.6 Released

    Just updated to 3.0.6 from 1.0 beta. Read the release notes, but still can't figure out how to export more than one preset at a time, as I used to. Previously, I would right-click on my selections in Axe-Manage, and the export command would be there. How do we do this with Axe-Edit 3?
  8. Stringtheorist

    What's the easiest way to save amp settings to global?

    Excellent. Just what I was looking for! Thanks. :)
  9. Stringtheorist

    What's the easiest way to save amp settings to global?

    Bingo.
  10. Stringtheorist

    What's the easiest way to save amp settings to global?

    I have a number of presets created with unlinked amp blocks that I now want to add to the Global bank. Given that it still doesn't seem to be possible to save just the X or Y state of a given amp block to a Global amp, what is the easiest way of copying the amp settings? Write them down on paper...
  11. Stringtheorist

    Stevie Salas - Tell Your Story Walkin'

    I'm struggling to recreate the autowah settings for this song: https://www.youtube.com/watch?v=zOw92zVVNv0 Can anyone suggest settings for this? Right now I'm using a Wah block attached to Env, set to the following: Type: Funk Res: 10 Taper: Log 30A Drive: 0 (Global Envelope settings are all...
  12. Stringtheorist

    Farty low end... preset issue or guitar issue?

    I'm pretty sure it's not the preset. This is what it sounds like on neck and bridge pickups with bass at 0 and bass cut on. Sounds like fret-buzz. https://dl.dropboxusercontent.com/u/8381490/fartynobass.wav
  13. Stringtheorist

    Farty low end... preset issue or guitar issue?

    OK, I'll try that. How should I put the low end back, though? Use a PEQ block?
  14. Stringtheorist

    Problems recording with Audacity

    It's set to Aggregate Device which is what I use with Reaper. Tried Axe as an alternative but still couldn't hear anything.
  15. Stringtheorist

    Farty low end... preset issue or guitar issue?

    I'm trying to dial in a crunch tone using Brit/Marshall type amp models specifically for my Strat. I notice that using the neck pickup I cannot get away from this farty, buzzy overtone. I've tried dialling it out of the preset (Master Vol, Gain, Bass, Comp, etc.) but with no luck. Getting the...
  16. Stringtheorist

    Problems recording with Audacity

    Yeah, bypassing the hub fixed the crackle. Thanks Yek! Now, anyone know how I can get the live monitoring to work?
  17. Stringtheorist

    Problems recording with Audacity

    Er, I don't think so.
  18. Stringtheorist

    Problems recording with Audacity

    Yes, I use a USB hub. Should I try bypassing and going direct to my Mac?
  19. Stringtheorist

    Problems recording with Audacity

    OS 10.9.1 No clip light
  20. Stringtheorist

    Problems recording with Audacity

    Yep, crackle is still there after export. CPU usage is about 50%. Axe as soundcard.
  21. Stringtheorist

    Problems recording with Audacity

    I want to make some quick clips with Audacity but I notice that although my signal is not clipping I get a nasty crackle all over my recordings. Quality is set to 48k. Any idea where I should start troubleshooting? Also, I can't seem to set it up so that I can monitor my signal as I'm...
  22. Stringtheorist

    Metallica - Blackened cover [ToneMatch]

    OK, got it. :)
  23. Stringtheorist

    Metallica - Blackened cover [ToneMatch]

    Great job. Which Cab IR are you using?
  24. Stringtheorist

    Cliff. Firmware 13 - now what? :)

    The most useful extra for me right now would be to be able to copy global amp settings across the Amp1/Amp2 block or X/Y parameter. eg. Copy Amp 1 G1:X to Amp 1 G3:Y, or Amp 1 G1:X to Amp 2 G1:Y etc.
  25. Stringtheorist

    Help me find a new guitar

    Cheers. I will look out for one.
  26. Stringtheorist

    Help me find a new guitar

    Interesting. I think I would be more inclined to go with the Cantrell signature model. If only it came with a two pickup option.
  27. Stringtheorist

    Help me find a new guitar

    Plays like a Tele, sounds like a Les Paul. Strat shape, with single locking term and 3-way toggle pickup selector. Is there such a thing? I know I could go the custom route but I anticipate this would take me beyond my present budget. Any suggestions?
  28. Stringtheorist

    Coverband Players Share Your Song Secrets

    ACDC - Highway To Hell, Cranberries - Zombie, Led Zep - Black Dog, Fleetwood Mac - The Chain
  29. Stringtheorist

    Advice needed from Ibanez users re. pickups

    I didn't really get the Ibanez to augment my arsenal of guitars but in the hope it might replace some of my others.
  30. Stringtheorist

    Advice needed from Ibanez users re. pickups

    I lowered the Tone Zone on the bass side and it helped a lot. Still preferring my LP though. The thin neck feels very strange.
  31. Stringtheorist

    The Cult - She Sells Sanctuary?

    Here's my preset. Uses two amp blocks attached to a mixer assigned to one of my pedals.
  32. Stringtheorist

    Advice needed from Ibanez users re. pickups

    I'm still adjusting to the very flat neck. It does feel strange after my other guitars but I dare say I could get used to it. I'll try the pickup adjustment suggested by RSF before reaching any final conclusions.
  33. Stringtheorist

    Advice needed from Ibanez users re. pickups

    I just bought my first Ibanez on eBay. It's a J-Custom (model RG8470Z BX) in H-S-H configuration (Tone Zone/True Velvet/Air Norton). Running through my usual Axe-FX presets which are self made for my Strat and Les Paul, my immediate observation is that the humbuckers are much hotter and require...
  34. Stringtheorist

    Best way to create "squish", decrease attack?

    I've noticed that with certain models (eg. Brit Super) the attack is very pronounced. I tried dialling it out by raising sag, master volume, damping, etc. but couldn't soften this aggressive bark. How can I make the tone more "squishy" (for want of a better word)? CLR active cab.
  35. Stringtheorist

    What pickups for the most authentic tele twang sound?

    I have a Joe Barden bridge pickup in my Warmoth Tele. Best one I've tried in that guitar, and it's humbucking to boot. I do think an ashtray bridge with brass saddles has a part to play in producing the archetypal Tele "quack" however. Brad Paisley - Mud On The Tires solo : Guitar Lessons in...
  36. Stringtheorist

    Van Halen - Mean Streets

    You nailed the tone and the playing! Great work. 8)
  37. Stringtheorist

    CLRs and Amp In The Room tone. I think I've figured something out.

    Wow. This is a revelation! I tried this on my Plexi patch and it does just what you say. I've only tried it at very low volumes and will probably need to roll back a bit for rehearsal/gig levels but it definitely helps to give body to the tone coming out of my CLR. Not just low notes either, but...
  38. Stringtheorist

    Going to try FRFR again at a gig, but why is everything sounding so harsh?

    Thanks Yek, but Cliff doesn't elaborate on what "loud" actually means. Certainly, when I turn up the stock (default) amp tones to the level I normally rehearse/gig at, the highs are often way too harsh, and the bass can tend to sound flubby, boxy or balanced, depending on the amp.
  39. Stringtheorist

    Going to try FRFR again at a gig, but why is everything sounding so harsh?

    Can anyone tell me at what volume level the stock amp tones are intended to sound "balanced"? Presumably, the algorithms have been designed to reflect a certain tonal balance at a specific volume. I have noticed that whenever I turn my preset levels down the amps sound muddy, squishy and...
  40. Stringtheorist

    Atomic active CLR - Missing "body"

    Nah, I don't have space in my car for one thing. I wanted the CLR to save wear and tear on my back.
  41. Stringtheorist

    Atomic active CLR - Missing "body"

    For Crunch: Brit Super, Thordendal, Plexi 50W High, Brit Brown, Recto Red Mdrn, 5153 Red, Class A 30W TB, Hipower Brllnt Fo Clean: Brit JM45, Vibrato Verb, Wrecker, Hipower Brllnt, Delux Verb
  42. Stringtheorist

    Atomic active CLR - Missing "body"

    I do understand the differences, of course. I am merely pointing out that the CLR currently is not proving to be an adequate substitute.
  43. Stringtheorist

    Atomic active CLR - Missing "body"

    LOL :D
  44. Stringtheorist

    Atomic active CLR - Missing "body"

    What can I do then besides purchasing aftermarket IRs? I'll start by sifting through the stock cabs I guess. What are you using?
  45. Stringtheorist

    Atomic active CLR - Missing "body"

    My IR is a mix of stock cabs #41 and #38. I haven't tried the OwnHammers. I remember buying a shedload of Redwirez IRs when I was on the Ultra and everyone was raving about them but I ended up never using them as I always preferred my regular cabs. So now I'm a bit leary about spending more...
  46. Stringtheorist

    Atomic active CLR - Missing "body"

    I used one or two 2x12 cabs placed vertically, side by side, with Deeflex deflectors in front to push some of the sound up to my head. The CLR is mounted on a pole in FF mode.
  47. Stringtheorist

    Atomic active CLR - Missing "body"

    So I've been testing and gigging my active CLR for about 5-6 weeks. Despite the fact that I can at last clearly hear myself on stage, the consensus amongst my bandmates and I is that for our onstage sound we miss the fullness and body that comes with playing through a genuine guitar cab. I've...
  48. Stringtheorist

    My lovely Friedman HBE

    How do you find the Hydra III plays? I remember being interested in those years ago.
  49. Stringtheorist

    Any tips for achieving an 80s Alex Lifeson Rush tone?

    Thanks... I know, I've been following the thread but it isn't specifically about 80s Rush tones and no one who's contributed to that thread has yet posted any presets or advice useful to me. I downloaded Dancing Frog's presets but they all sounded horrible through my rig, guitars and ears. Since...
  50. Stringtheorist

    Any tips for achieving an 80s Alex Lifeson Rush tone?

    I'm specifically trying to create a "Hold Your Fire" era Alex Lifeson tone. I'm finding the hardest part is EQing the amp properly to get that really sparkly sound on top without the highs being piercing. I'm also not sure which is the best amp model to use for this. I've tried all the...
  51. Stringtheorist

    A "Rush" Patch Thread

    I found a cranked HiPower Brillnt to be the best for a Farewell To Kings era tone. From later work I would be most keen to see whether anyone has been able to nail Alex's clean sparkly tones from Hold Your Fire (Time Stand Still, etc.)...
  52. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    Cheers Shadoe; that would be great. The EMGs are noticeably hotter than my LP's pickups... on my "go to" clean amp (Brit 45) the tone clips in an unpleasant way. I compared the Recto and Thordendal with the 5153 and Triptik models. No doubt the 5153's voicing sounds stronger but I think that...
  53. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    Currently Ernie Ball Beefy Slinky.
  54. Stringtheorist

    Any solutions for failing wireless transmitter cables?

    Great. Thanks!
  55. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    This could be true. Which amp models do you use?
  56. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    Thank you. I will give that a try.
  57. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    I haven't checked the batteries but the guitar sounds fine in standard tuning, so I'm assuming it's not this. If I'm using a metal preset (Thordendahl or Recto) I'll usually need to add extra drive to present the same level of distortion that I would hear in standard. This could be just an...
  58. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    I can't do this to the same extent with my other guitars as they have much lighter strings, although I often use drop D without any noticeable issues. Hard to say without restringing and listening again.
  59. Stringtheorist

    My drop tuned guitar doesn't sound great thru Axe II

    Is there anything I should do to optimise my Axe preset for de-tuned guitars? I have an ESP Eclipse (EMGs) tuned to B standard. It sounds horrible. In comparison to a guitar in standard tuning, it sounds like there is less gain going to the amp block, yet I know this guitar is "hotter" than my...
  60. Stringtheorist

    Any solutions for failing wireless transmitter cables?

    I notice the cable crackles when I wiggle the 1/4 jack but you could have a point that it may be the other end which is faulty. I'll check it out more thoroughly at my gig tonight.
  61. Stringtheorist

    Any solutions for failing wireless transmitter cables?

    I recently replaced the original wireless transmitter cable for my Sennheiser EW500 3G because it was starting to crackle and cause dropouts. It took me some time to source a replacement (which was identical to the original). Fewer than three gigs in and already the new cable has failed in...
  62. Stringtheorist

    Routing acoustic instruments and electric guitar through Axe 2 at same time

    I'm having difficulty figuring out how to route the signal from my acoustic instruments through the Axe in parallel with my electric guitar, such that there is no bleed from one to the other. My signal is Acoustic (DI box in) -> Input 1 (R) -> Output 2 (L) via FX loop Electric signal is Input 1...
  63. Stringtheorist

    Axe II still flipping amp mode between X/Y at random

    This sounds like a good move.
  64. Stringtheorist

    Axe II still flipping amp mode between X/Y at random

    It doesn't appear to do this unless connected to the MFC, but it only happens at random which is not what I would expect if there were some CC# message controls set up in the preset. I will check though.
  65. Stringtheorist

    Axe II still flipping amp mode between X/Y at random

    I don't have any switch set to go from X to Y.
  66. Stringtheorist

    Axe II still flipping amp mode between X/Y at random

    Which switch are you talking about?
  67. Stringtheorist

    Axe II still flipping amp mode between X/Y at random

    This has been going on for ages and now it's really p***ing me off. I'm only noticing it happening when my MFC is connected but I can never predict when it will happen or in which preset. I can't play a single gig without this happening at least once, and I have to correct it manually (switch...
  68. Stringtheorist

    amp similar to laney iommi/sabbath

    I've had difficulty replicating the Sabbath tone also. Right now I'm using the Hot Kitty since it seems to come closest. I dare say there's an amp/pedal combo that would work better but I haven't the patience to work it out.
  69. Stringtheorist

    CLR: Active vs. Passive

    Great... Thanks for the links. Looks like the active cab is what I need. :)
  70. Stringtheorist

    CLR: Active vs. Passive

    Has anyone done a side by side test between the CLR active and passive cabs? I already own both a Matrix GT1000FX and an Atomic Reactor 50/50. Would I be better running a passive CLR with one of these or is the active version significantly better in any respect?
  71. Stringtheorist

    Which gauge strings should I use for B standard?

    LOL, yes it's "that" St. Ives. :) Got a "Not Even Slinky" set on the moment. The plain G is better but still feels a little heavy. I'll try the Beefy Slinky next.
  72. Stringtheorist

    Which gauge strings should I use for B standard?

    Thanks. I've ordered these.
  73. Stringtheorist

    Which gauge strings should I use for B standard?

    OK, here are my findings after fitting an Ernie Ball 13-56 7-string set (minus the top string) to my ESP Eclipse CTM. First, I HATE the wound G-string. It may intonate better but it just feels wrong, and is much harder to bend. Initially, I even had trouble playing 5-string barre chords because...
  74. Stringtheorist

    What is the most efficient way of creating this routing?

    Mixed signal in Out 1.
  75. Stringtheorist

    What is the most efficient way of creating this routing?

    I want to run my usual backline signal in parallel with a FOH signal. The backline signal goes into a reverb block in parallel and ends at the FX block where it is channelled into two feeds, one for each of my cabinets (one wet, one dry). I want to send the same original signal into a Cab block...
  76. Stringtheorist

    Which gauge strings should I use for B standard?

    My band wants to play a song in B standard tuning. I've never tuned a 6-string this low before. Should I get a set of baritone strings? What gauges should I be looking at?
  77. Stringtheorist

    Hang guitars on wall?

    I've been using these for years after trying several more expensive brands: LOT of 3 Guitar Wall Hangers/Holders/Stands/Racks/Hooks, fits most Guitars | eBay They work brilliantly for me, but like all hangers the rubber tends to perish and shred over time. If anyone knows of a hanger that...
  78. Stringtheorist

    Anyone using fuzzes or drive pedals with Axe II?

    I've been one of those waiting a long time to see improvements in the Axe's drive pedal sims, but since this doesn't seem to be forthcoming I'm thinking of getting a pedal or two to use in front of my signal chain. Who else is using stand-alone fuzzes or overdrives, and how well do you find they...
  79. Stringtheorist

    If you're not FRFR...

    I use an Atomic 50/50 with power amp modeling ON. Sounds better to me than the Matrix amp.
  80. Stringtheorist

    Tuner (IA17) no longer engages with MFC button press (solved)

    The preset info just came back after I wiggled the CAT5 cable. The tuner is back also. I wouldn't mind but it's a brand new cable!!
  81. Stringtheorist

    Tuner (IA17) no longer engages with MFC button press (solved)

    When I changed the MIDI setting to AMP1 the MFC stopped displaying my preset names (only the number)... followed by AXE-FX NAME TIMEOUT! The other IA LEDs went out also. When I reset IA17 to TUNER, the Timeout error remains... ?
  82. Stringtheorist

    Tuner (IA17) no longer engages with MFC button press (solved)

    IA17 is set to TUNER. Tuner CC in I/O = 15
  83. Stringtheorist

    Tuner (IA17) no longer engages with MFC button press (solved)

    Recently my tuner IA (17) has stopped working. I can still engage the tuner from the front panel but the MFC won't engage it. The red OFF LED stays on the whole time. Could some communication between the Axe and the MFC have been changed when I updated to fw 11.00? How should I troubleshoot...
  84. Stringtheorist

    G66 = Awesome

    Agreed. They are fantastic. Even though I have always offered to pay for spare parts when I've needed them, they have never charged me. What service!
  85. Stringtheorist

    FRFR How many do you need

    This question is mainly directed at CLR owners: If I'm using one as backline, would I also need one as a floor monitor? Bear in mind, I play with some very loud drummers and frequently have trouble hearing myself on stage. Recently I've been using a pair of Deeflex sound deflectors which helps...
  86. Stringtheorist

    Where's the link to the new preset banks? (solved)

    Thanks Yek. Don't know why I missed this! :o
  87. Stringtheorist

    Where's the link to the new preset banks? (solved)

    When was the last set of factory presets released? I can't find the link on Fractal's website.
  88. Stringtheorist

    Cover band guys!

    Why do you need a bank file? Not the preset file?
  89. Stringtheorist

    Cover band guys!

    I'm in three covers bands and have a separate preset for every song. However, I use the global amp settings, which I believe don't get saved with the .syx file. (Someone correct me if I'm wrong). I also run into an Atomic 50/50 and speakers, no FRFR. I therefore don't know how useful other users...
  90. Stringtheorist

    Recorded in a tin shed, in the bush

    Awesome. As Dr Buds said, very Korn-like. 8) Which amp model is that?
  91. Stringtheorist

    My new Suhr Custom Tele Black Beauty .. gas alert !!!

    Gorgeous! Can't wait to hear this guitar, especially the Telebucker mod. I'm putting together my own Suhr custom order but vacillating on what I want, and afraid that a Tele won't be versatile enough. Is the headstock logo pearl or abalone?
  92. Stringtheorist

    Drive block mix not working as it should?

    I also am frustrated by this. I would like to control the amount of pedal drive with an expression pedal. This means tailoring the curve on the mix parameter so that its minimum value starts at around 20-40% in order to keep the level about the same as it would be if there was no drive. However...
  93. Stringtheorist

    Muse - Knights Of Cydonia drive sound (V11)

    Anyone?
  94. Stringtheorist

    Chord sequencer for practising composition?

    I have CHORDBOT for my iPhone, and this is exactly what I'm looking for in a desktop version. Thanks for the suggestions everyone. I will check out Band In A Box.
  95. Stringtheorist

    Chord sequencer for practising composition?

    Does anyone use sequencing software to help them practise composition? Back when I used hardware sequencers for recording, I used to find the onboard sequencer on the Yamaha QY70 very useful, as you could enter chords and the intelligent arpeggiator would change the rhythm pattern automatically...
  96. Stringtheorist

    Live Setup poll...

    What's the model?
  97. Stringtheorist

    Live Setup poll...

    I'm in several covers bands... no originals, and I'm anal about the sound being right. In fact I get quite uncomfortable trying to play a cover song without the right sound. Like Severed, I'm inclined to think that my Axe isn't being used to its' full potential if I don't take advantage of its...
  98. Stringtheorist

    Still no input signal in Reaper: Please help me troubleshoot my setup

    OK... I've solved it now. Aggregate Device was incorrectly set up. USB/Digi out should have been set to Out 1 and my Global cab bypass was on. Now I've corrected all these I'm getting a signal again. :) However, my input level is unaffected by the front panel Output 1 level control. Why is this?
  99. Stringtheorist

    Youtube Challange from a Ticked Off Non-Fractal Dude. (not me)

    He says he's sick of Axe-FX owners telling folks to sell their amps because it makes them obsolete and then proceeds to back up his point by making a recording that... USES NO AMPS!! Anyone else see the flaw in this logic?
  100. Stringtheorist

    FW 11 Jumpered Plexi Video - VH's I'm The One

    Where is this Plexi 50 Jump model? I have 11b installed and all I see are the 4 plexi models from v10.
Back
Top Bottom