Search results for query: *

  • Users: hunter
  • Content: Threads
  • Order by date
  1. H

    IR Format 2.0

    Anyone know if there are plans to establish a more complex IR standard, that not only samples different Frequencies, but also different Amplitudes? We all know that speakers (Cab IRs) as well as rooms (Reverb IRs) respond differently when triggered with different amplitudes. A format like this...
  2. H

    Phasing issues when slaving an amp through the Axe?

    When slaving an amp through effects for W/D or W/D/W it is common to mix in some dry on the wet cab(s) - Dave Friedman confirmed to me that this is what people like Steve Stevens, EVH etc do/did. A fully wet cab makes you feel weird while playing, hence some dry mixed in to blend the FX better...
  3. H

    Brootalz Shootout Vid

    Pulled together some highgain tones I did direct with the Redwire 1960A and the Metal Experiment IRs, thought you might be interested in this: http://www.youtube.com/watch?v=gnBEMZGb10U
  4. H

    Need some feedback on tones/patches

    Hi all, it's been a while that I was around here. Reason was mainly that I was using Amps again. For an upcoming recording project which will be recorded direct I updated to latest FW and got some Redwirez Cabs as these seem to be preferred around. Dialed in some different flavour highgain...
  5. H

    New Forum Category: Axe FX in Concert!

    I suggest to create a new Forum Category: "Axe FX in Concert" Then in this category we could have one thread per region/country (e.g. "Concerts in UK") and users can post their concert dates, so interested people can attend. Benefits: -Users can meet and chat -Users can watch what other people...
  6. H

    tweak challenge: change the decay slope on delay repeats?

    I was wondering what kind of FX chain I would have to set up to get influence on the volume slope of the delay decays. Like let's say if you have 3 repeats and they would by default be 1st repeat: 80% volume 2nd repeat: 40% volume 3rd repeat: 20% volume How can I set something up (I was...
  7. H

    Wah Comparison: Axe internal Wah vs. RMC3=>Axe

    Here is a small comparison I did. To get the pronounced tone of the RMC I programmed 2 Wahs in parallel in the Axe. Other than that it's same amp settings and same guitar, first a more high gain example, using "Brown", then a lower gain example using "Plexi1". Obviously there is not THE Axe...
  8. H

    Discuss my proposal for a "Simple EQ" Module

    I know I am posting a lot in the Wish List. But that's what the forum is for, to discuss if you have an idea for improvements, right? So sorry if I'm a bit of a spammer here. Right, I admit it, I don't like the ParaEQ, it's too sophisticated and too much page skipping for me. And the graphic EQ...
  9. H

    Any users have experiences with external patch switching?

    I plan to have my patches remotely switched by our keyboarder's sequencer, and as well receive midi clock for delay times. Plan is to connect the in of my Ground control, so I can see the switching and current state on the floor and can also change it in case I want to. If it works I can just...
  10. H

    Peavey Valverb (tube reverb/trem) - schematics available

    Amazing sounding reverbs/trems in this unit. Would be great if the rev and/or trem types could be available in the Axe. Demo here: http://www.youtube.com/watch?v=XA9Gu83wXh4 Schematics: http://www.prowessamplifiers.com/schema ... lverb.html
  11. H

    Old school high gain soloing à la G. Moore (+ Patch)

    Here's some one take stuff with my MM Axis recording on "La Axe". The VHT was cranked while the Axe output was at like 1/10. Was done at TV volume with a single SM57, but IMO it sounds "loud". Model used was the SLO100, with all settings pretty noon-ish, except a bit of Deep and increased...
  12. H

    Share your Wah Settings (with artist reference)

    Apart from the fulltone setting in Wiki, what are your Wah settings? If it's supposed to emulate a certain artist, which? Please post like this: Artist: (e.g. SRV) Position: Before Amp & Drive / After Drive, before Amp / After Amp FMin: xxxHz FMax: xxxxHz Res: x.xx Track: x.xx Level: x.xxdB
  13. H

    Improve Wah

    If there is one effect where I am not 100% satisfied in the Axe, it's the Wah simulation. I know that Scott swears that his values sound 100% identical to his Fulltone, but I don't feel that. I tried loads of stuff, putting 2 in serial with a drive in between, 2 in parallel, single wahs, with...
  14. H

    cranked my 2/50/2 today ...

    I always have this "cranker's block" in me that I don't dare to run any amps on full. But I had this idea today that I wanted to try the VHT on full, in the high setting, and then adjust volume on the Axe. Sounded great, actually more like a real amp would. I still played at fairly acceptable...
  15. H

    Going from hairy clean to really mean with the guitar volume

    Axe FX into VHT2502. This is a highgain Marshall style tone (BigHair) and I demonstrate the dynamics that can be had with just the guitar's volume. It's a MusicMan Axis, however a high quality Hamer Pot has been fitted for the Volume control. http://www.youtube.com/watch?v=AfYXI_ryKqw&fmt=18
  16. H

    A new original of mine (work in progress)

    This is work in progress, so please apologise if it doesn't have a perfect structure or anything. I admit the chorus is very commercial, sorry to be commonplace :O) The Synth theme is a NordLead I (yeah still had one of those lying around) This is made with two guitars, but no double tracking...
  17. H

    Getting that Marshall Upper Mids Bite (Video)

    Axe can do like a Marshall, just more body and more controllable in terms of volume. The most Marshall model in the Axe to me is actually the BigHair. Just love that amp!! Here we go, the vid is not HD or anything, just the integrated web cam of my iBook...
  18. H

    Bug in Bypass/Modifier -> Reset on PC?

    So, today I wanted to use a MIDI Controller to toggle between Amps within one patch. I cannot do this via global controllers, as these cannot be inversed (i.e. not possible to switch Amp1 ON and Amp2 OFF at the same time with one controller), so I had to use an Ext 1...8 and do the switching via...
  19. H

    Badass. Pissed off. BigHair.

    PRESET ADDED Keep in mind that it was recorded through VHT2502 and G12H30/SM57, so you might have to tweak the cab for FRFR. This Fortin Meathead sound didn't get out of my head, so I was tweaking a bit. Unfortunately I don't have the 4x12 here, so it had to do on a 2x12 with a G12H30 and an...
  20. H

    8.02 Recording - Reworked Drives: Pi Fuzz and new Tonebender

    PRESET ADDED Was playing around with some Fuzzes. Not trying to emulate any tonez here, just was looking for a backing track with something legato so I could show the liveliness of the drives. Is it possible that these drives sound much more analog/lively than before this release or do I hear...
  21. H

    OMG, copy this tone on the Axe!!!

    This sounds freaking awesome, and I have never achieved a tone like this. Any of you know how to get this out of the Axe? Please post patch!! Fortin Meathead Channel 6 clip: http://www.youtube.com/watch?v=kM7Svwuf0_8&fmt=18
  22. H

    My delay spillover isn't working, am I doing sth wrong?

    So my understanding is that when I turn "Delay Spillover" to On in the Global settings, that then a delay trail from one Patch would still decay when I switch to another Patch. However it doesn't work. Whenever I do a program change, all my delay or reverb trails are cut off. It's always been...
  23. H

    Inofficial Customer Survey: Focus on Firmware or Editor?

    Sooo, you as a client, would you want Cliff to focus his developer genius and limited resource rather on further development for the Axe Firmware, or would you rather say, he should fully focus on the editor first? Please Vote!
  24. H

    Cutting through a very loud gig (Axe->VHT2502->Bogner412)

    I just cut some vids of last night and although the sound quality is really sub par, you can hear the Axe cut through very well (I'm the guy on the right). Beware that I am running just one side of my poweramp, so 50W, whereas the other guy plays a 120W Ueberschall: Models used were mainly the...
  25. H

    VHT 2502 owners, how do you prefer the VOICING switch?

    The VOICING switch on the 2502 causes quite some significant changes. I can't make up my mind, how do you set yours in conjunction with volume, presence, depth?
  26. H

    New idea for a W/D rig!

    Sooo I was discussing over at HRI, and had a nice idea which I will try out soon. You know the problem, FX in the loops of amps usually destroy the tone. Sooo as I have a Palmer PDI-09 lying around, I was thinking, why not keep the amp (Bogner XTC) dry through my 4x12, grab the frequency...
  27. H

    22W in a standard pedal!

    Hmm, thinking axe, 2 of these, 2 1x12 thieles ... :mrgreen: http://www.ehx.com/products/22-caliber
  28. H

    Global Presence / Deep

    I would like global presence/deep that would work relative to the coresponding features in the amp block. For example you turn global presence to -10% => All patches are played back with 10% less presence than in the amp block used within a patch. Like this it would be easy to globally and...
  29. H

    Fratomic FRFR?

    Well, no news about this one in a long time. Meanwhile loads of Verve12MAs have been shipped to Axe users and it seems to have become very quiet around the Fratomic FRFR cab. Have they missed the boat a bit?
  30. H

    The Recto Orange Appreciation Thread

    I just rehearsed with the metal band and played 90% of the time on a simple Recto Orange patch into the VHT2502/Bogner 4x12. No EQs or drives, just the amp without poweramp sim. Great great tone, feel and dynamics. I really love the Recto Orange. That must be what people refer to when they...
  31. H

    2 videos using the Axe as Effect Unit in the loop of an XTC

    Axe FX is only doing Effects here. I know this is a bit bourgeois, but well, if you have it around, why not play around with it :mrgreen: I switch both, FX and XTC channels simultaneously with a GC Pro MIDI switcher (and an Nobels MS-4 Amp Midi switcher). It's a lot of fun but a bit...
  32. H

    So there is this 2K$ unit that just does cabs/mic sims ...

    ... and loadbox. Anyone tried it or heard about it? Seems to be a small company like FAS and a dedicated bunch of blokes too. What do you think? http://www.two-notes.com http://www.youtube.com/watch?v=k4_Qcpm4i7M http://www.youtube.com/watch?v=YCCpv5VNFDk
  33. H

    I will have my first 2 gigs this weekend going direct.

    Guys, I've played the Axe before live, both through the power stage of the Shiva and through the VHT2502, but never went direct. It's gonna be two gigs with little time. Tonight it's support for a band and we have 20 min. total to set up. The sound guy won't speak English and my French is ...
  34. H

    Challenge: Alice in Chains

    Hi all. I got an Ecstasy 100B (real, not model) yesterday and just made a recording (through a 4x12 with Vintage 30s and SM57). I'd really like to nail this kind of tone with the Axe, but fail to get it right. Anyone can make a patc that gets close? Here the clip...
  35. H

    Fat 800 patch and clip

    Ok ok, blasphemy to play The Wall with tons of gain, but I just had to :mrgreen: I think this is quite a good one for leads, or if you turn off the drives also rhythm work, enjoy both clip and patch. (patch also includes wah and phaser if you wish). http://www.klangforschungszentrum.de/te ...
  36. H

    Top Boost Breakup Example - Solo for Don't Speak (No Doubt)

    Top Boost pushed by a Tube Driver into 4x12 25w recorded direct with all FX from the Axe: http://www.klangforschungszentrum.de/te ... aksolo.mp3
  37. H

    Saw Chris Cornell tonight - Pete Thorn has an Axe Ultra

    What an amazing gig. Chris is singing spot on 100%, I didn't hear any bad notes at all, he sang with passion and his amazing timbre! I would probably give a finger to be able to go on tour with him. His band was really great, too. In fact I met Pete Thorn outside at the bar before the gig, and...
  38. H

    First rehearsal with my metal band and 12MA last night

    I have to say it was a full success. I was hearing myself SO WELL, and the little bugger was really pumping out some amazing low end. It wasn't short of punch in any way compared to the VHT2502 and Marshall 4x12. I always felt that I was really loud and was enjoying the sound so much, while...
  39. H

    Spectrum Analyzer

    Ok, this might sound a bit weird, but I like to use spectrum analyzers to check my tones, especially when I'm not able to test them loud. It can give a good first fix if you check stuff. Could use the same bands and looks as the Graphic EQ in the Axe. Available as a module to be placed...
  40. H

    Some Aerosmith

    That rhythm section during the verse got the best of me, but apart from those rhythm weaknesses I think the tones are pretty good, well judge yourselves. JCM800 patch from Javi taken a bit further (Tube Drive settings changed, lowered lo freq of Drive and increased gain while decreasing...
  41. H

    "Sober" intro with Javis Dumble

    These patches are just so much fun, and when I noodled on the Dumble one earlier on, Sober just sprang to my mind, so did a little clip (mainly for myself to be able to listen to the sound without playing - more neutral ear etc). The only change in setting is that I switch the pickup from...
  42. H

    Possibility to name user cab slots

    I always forget which cab is in which slot. So possibility of naming them globally would be pretty cool I find, what do you think?
  43. H

    Resolved - which is amp, which Axe&2502 and which Axe direct

    Allrighty, I did similar clips over the past months/years, different guitars but all mahogany with vintage/hot Bare Knuckles. So here is the same-ish clip, -once Marshall VM 2266 through Heritage Cab/SM57, -once Axe FX through VHT2502, Bogner 4x12 and SM57, -once Axe FX direct. What do you...
  44. H

    Orange Amp model - Rockerverb or Thunderverb

    From all the classics and contemporaries in the Axe, there is no Orange. Wouldn't it be cool to have that kind of tone? Check from 4:05 till the end: http://www.youtube.com/watch?v=mDckcr_5Iu4
  45. H

    Dialing in direct tones for my classic rock/pop project

    removed due to guess game here: viewtopic.php?f=11&t=6818
  46. H

    Refresh my memory: Das Metall is Ch3 or Ch4 of the VH4?

    Would like to know, everyone is raving about Ch3, but Das Metall seems to be very gainy, so it's Ch4?
  47. H

    Some slow tempo Brootalz with Ueber

    Did all guitars in this track with the same Ueber patch, recorded direct into Logic. Gotta love the Ueber!!! Just a chain of parts at the moment, it doesn't have a "song structure" yet. Also just 2 guitars and Drums right now, no bass or other stuff yet, so it's maybe a bit rough...
  48. H

    Check out the amazing dynamics of the Axe!

    Had to share this. I just replaced the stock pots in my PRS with Hamer Pots, which are supposed to be among the best around. So here is a small clip demonstrating how well the Axe reacts on the extreme dynamics of the guitar/pot, from all the way down, to all the way up. Both done for Neck...
  49. H

    "Input" Module

    I would like a simple module where you can select an Input in the matrix. So for example you run several instruments and want easy control on which input goes to which signal chain. I know there are other ways to control this, but I find it a little complicated and always seem to be searching...
  50. H

    2 guitars w/ separate amps & signal chains in parallel?

    Hi all, Tomorrow we have a small "in living room" rehearsal at my place. Bass player and other guitarist will be coming. I was planning to run the bass straight in the mackie mixer to the 12MA and the 2 guitars through the Axe. But how can i run 2 guitars in parallel and give them dedicated...
  51. H

    Just out of interest: How are the factory IRs recorded?

    I experimented with some user IRs today, and realised that they sound quite different to the stock ones, as they are recorded with SM57s or other mics. The Axe IRs seem to be without a mic curve, as mics are there as separate models. But also the Axe IRs must be recorded with some kind of mics...
  52. H

    Big City Nights

    Some great IRs available from our friend here, Clawfinger, you rule!!!!! This is a small clip, quite rough edged but melike it rough :mrgreen: http://bareknucklepickups.co.uk/forum/i ... ttach=6456
  53. H

    Which Stereo DI Box with the Axe?

    I am new to the FRFRcommunity, and I'll have some festival gigs this summer. As I don't wanna run into any "Too Hot!" issues with the FOH responsibles, I understand a DI Box is recommended. I guess as with most things I shouldn't go for cheap, but I also don't wanna spend a fortune on one. It...
  54. H

    Verve 12MA, one day in - Youtube Video

    Not sure if this makes much sense, but I thought I'd try. Let's say it's 50% bringing across of what it's like in the room. Probably this is still useful for one or the other: http://www.youtube.com/watch?v=X8ylaeh5ctc
  55. H

    Verve 12MA arrived - first impressions

    My Verve12 arrived today. Looks very neat, I like the shimmer of that driver behind the metal grille, looks very upmarket. And it's lighter than I thought. Compared to my 6U rack with the VHT this would make a two package solution, the Verve which fits nicely in one hand, the 3U rack with Axe...
  56. H

    Verve 12MA in the room recording/video?

    Hija. Anyone know of any vids on youtube or so that show the in the room experience of the 12MA?
  57. H

    This could be interesting - looking for a compact rig?

    Just discovered this, I wouldn't just have ordered a Verve 12MA, I would probably fetch it: http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... 0388350735
  58. H

    Ueber with USA Clean Tonestack

    Made a short clip to demonstrate the Ueber/USACean TS combo: http://www.thegutbusters.com/temp/ueber_usaclean.mp3
  59. H

    Holy Moly - Ueber with USA Clean Tone Stack!

    Wooooohaaa!!!! I just changed the tone stack in my Ueber to USA Clean and :o Awesome metal tone. Tightness of the Ueber with the lower mids of the Recto kinda. Try it, this combo rulez!!!
  60. H

    Slowly getting the hang of direct - Karavitz style clip

    Rhythm is D60M with Vintage 30 and 2x12 Boutique 2nd Guitar is CAE Rhythm and 2x12 Boutique Clip: http://www.thegutbusters.com/temp/lennyrock_axedirect.mp3 Pic:
  61. H

    Weird? Axe Direct tone-difference with speakers in the room!

    I was just playing around with the CAE3Ld and so I started to record some Gary Moore, direct Axe to audio interface. Now something weird happened: I recorded the first half of the song, but then there is this feedback part, which can't work with my studio monitors, so I stopped, kept the first...
  62. H

    Metal Band rehearsal recordings (mainly Ueber boosted)

    It was the first proper rehearsal with drummer, the other one was my audition for the band, so please accept my apologies for the unavoidable bummer here and there. Singer is still in India and will return next month, 2 weeks before the first 2 festival gigs :O) Equipment was Axe FX, VHT2502, a...
  63. H

    Can one Verve 12MA pull off the Brootalz?

    Some of you know that I recently started my first ever Metuhlz project, so being a rock player, I am learning how to dial in the tones for styles from Rammstein to Killswitch:Engage etc. Now also recently I discovered that FRFR might not be such a bad thing when I did some direct recording...
  64. H

    Has anyone nailed Lexicon PCM42 (VST:PSP 42) sound w/ AxeFX?

    I am using the PSP42 plugin in Logic, which is modeled after the "vintage" Lexicon PCM42 delay unit. It just sounds so ... special, very clear on one hand but also extremely thick and warm at the same time. It does sound "studio" if you know what I mean. Anyone know this plugin/unit and has...
  65. H

    Just recorded the Axe DIRECT for the first time (clip)

    Working on a new track for the ProgMetal project, so as it's been 1AM when I had the idea for this bit, I plugged the Axe direct, used one of my Ueber patches, threw the stock Vintage 30 and G12T75 cabs each mixed 50%, took my McCarty and put down some tracks. It's just EZ drums and 2 guitar...
  66. H

    Where do you run Presence on your Ueber patches?

    I played around with the Ueber today, and it's indeed amazing what that Presence pot does on this amp. I tried all kinds of stuff for metal riffing, everything between 5 and 10 really gave different, useable tones. But I ended up with Presence on 9! Can this be? It is bright, but also stays big...
  67. H

    Some ballad with Fryette60

    Love the dynamics of this amp model. This is the same patch as I used for "Alive" or the recent "Artbroker" clip, just with the volume dialed back and pickups mixed in different proportions for the picking and the lead bits. Recorded with a SM57 on a G12H30...
  68. H

    Zeppelin's "Artbroker" - kind of

    Well, the drum loop is called artbroker, that's why :mrgreen: Missed the start, Bonham and his weirdo rhythms ... this is PRS McCarty Rosewood through Axe into 2502 into a 2x12 Cab, G12H30 where I placed an SM57. http://www.klangforschungszentrum.de/temp/artbroker.mp3
  69. H

    Graphic EQ to tighten up amp for Metal - Standards?

    Although I've been playing for almost 20 years, I'm not very experienced in achieving Metal Tones. I think it helps a lot to use a GEQ for tightening up amps like the Recto New or the Ueber. Recto seems a bit muddy in the lower mids, Ueber too much in the low end, Das Metal a bit too fizzy in...
  70. H

    I'm lazy = stoopid!

    Guys you cannot imagine what kind of revelation I just had. 2 months ago I received my VHT2502, and although I have 2 cabs at home, enough cables and all, I never bothered to wire it up stereo. I always played Mono. 3 weeks ago I received some JJ KT77s and put them in ChA, so what I did was...
  71. H

    News about the 1U Egnater Poweramp (EL34, 5881, 6V6)!

    Quote from Jeff Hilligan: Ok so here is the blueprint for right now! Single rack spaced stereo and bridged mono. 30 watts a side 60 mono. Loaded with 2 pair of 5881's, presence, density, High low power switch and standy on each channel, so if one side goes down you can still use the other. Will...
  72. H

    News from Musikmesse - Egnater 1U Poweramp

    Well, I was in Frankfurt last weekend, and there I spoke to Bruce Egnater, funny that he didn't even know about the Eggie 20 in the Axe, he liked the name though (he said if it was named "Rebel" he'd not be so happy) :D Soooo I spoke to him and said that he should bring out a poweramp with...
  73. H

    FAS in Frankfurt?

    I'll be in Frankfurt on Saturday. Will there be a chance to test the Atomic FR? Will FAS be there?
  74. H

    Power riffing with Brown & SLO100

    Guitar: PRS Singlecut SE with a pair of BareKnucklePickups/Rebel Yells (Steve Stevens Sig). Rhythm part is Brown model through VHT2502 and into a ported 2x12 - Greenback Mic'ed with SM57 and G12h30 Mic'ed with Sennheiser E609, panned hard left and right. Lead part is same setup but with the...
  75. H

    Some Katy Purry Axe Rock :oP

    Did some tracks on top of a karaoke thing of Kissed a Girl, used mainly Brown and Cornford Models, amped through VHT2502, mic'ed 2x12 Ported Heritage cab with a Greenback/E609 and a G12H/SM57. Guitar is a Gibson SG. http://www.thegutbusters.com/temp/kissedagirrrl.mp3
  76. H

    Just. Pure. Plexi.

    Some might still remember that patch/clip I once posted. Well, dug out the ole patch today and had some fun with it. It's really great and very dynamic: http://www.youtube.com/watch?v=ArxQRfsETM0&fmt=18 Edit: in case you want the patch, it's http://www.axechange.net/preset.aspx?preset_id=378
  77. H

    Mojave Scorpion

    Just pure awesome http://www.youtube.com/watch?v=p25OHKn3oGo
  78. H

    Tried to make the Plexi work, but ended up with the JTM45..

    Allrighty, I was trying to get that Germino sound from their website clips, but ended up with something more gainy and different ... I liked it a lot and decided to make a clip, here it is: http://www.klangforschungszentrum.de/te ... granto.mp3 JTM45 pushed by Super OD played through VHT2502...
  79. H

    A Clip with the "Corny RK100" - it's oh so smooth and spongy

    This RK100 is really special. Very smooth but still cutting through, a real piece of art that design. Very easy to play I find. I love the way especially the lower strings have that special vocal thing going ... Here's a small clip I recorded over Jeremy of Pearl Jam...
  80. H

    Request: VARIAC on amp models

    I think it would be fun to play with a virtual variac on the amps in the Axe ;)
  81. H

    Some SOAD inspired, new song concept (Ueber, D60)

    Just did it this morning, some EZ Drummer, some Les Paul (BareKnuckle VHIIs) and AxeFX, some Ibanez Bass into the Mackie mixer. Not very refined but I like it as a song concept ... http://www.klangforschungszentrum.de/te ... estler.mp3 Mostly the Ueber model, the lead part at the end is D60...
  82. H

    Band rehearsal recording - Whammy on RATM with the Axe

    Here is a clip of last night (oh I did some big bad mistakes) - but check the solo, I think I got that Whammy down pretty well with the Axe: http://www.klangforschungszentrum.de/temp/kitn.mp3
  83. H

    Cranked Class A Tone with Dr Z - Blues in C Minor

    Dr Z Model in the Axe is cranked, VHT2502 in Class A mode IRL low volume though Edwards Les Paul with BareKnuckle VHII calibrated set. Mic'ed with an SM57 on 4x12 Vintage30 http://www.klangforschungszentrum.de/te ... minor2.mp3
  84. H

    Alive! Boosted Fryer D60 and Gibson SG

    Did some widdling with my trusty SG with BareKnuckle RiffRaff Bridge and Mississippi Queen neck PUs. Axe FX: Deliverance 60 pushed by Fulltone FET Boost model VHT 2502 Poweramp Bogner 4x12 SM57 Here's the clip: http://www.klangforschungszentrum.de/temp/alive.mp3
  85. H

    D60 (ab)used to do some Zep :O)

    Ok, you wouldn't say the D60 is THE amp to do Zep, also the recording is lacking some depth I admit (was better in the room). But I just felt like some blues in C minor ... and the Axe just sounded so fierce that I .... so here is Since I've been loving you via the VHT model...
  86. H

    On which firmware have YOU joined the club?

    Tell me, what was installed when you got your Axe? I joined 5.1x
  87. H

    Ultra / VHT / Bogner Video

    Another dynamics demonstration of the Axe in just one setting with changes of pickups and volume on the geetar. http://www.youtube.com/watch?v=DCnvQR5zwWU
  88. H

    Axe Vol. Pot Dynamics Demonstration: Clean - Crunch - Lead

    Guitar: Edwards LP 112 Pickups: VHII set (neck covered, bridge open coil) Preamp: Axe FX (CAE 3 Ld Model) Poweramp: VHT 2502 Cab: Bogner 4x12 Mic: SM57 There is no change of sounds, it's in one go and just pickup/volume pot changes on guitar. http://www.klangforschungszentrum.de/te ... xe_vht.mp3
  89. H

    robotalk in Envelope Follower Mode

    Sounds amazingly organic and phat! Check the 2nd half of the video in ENV mode: http://www.xotic.us/video/michael_thompson/mt_robo.html
  90. H

    a quick Eggie Rebel clip

    new Eggie Rebel Model sounds beasty sounds like a little angry amp to me :mrgreen: http://www.klangforschungszentrum.de/temp/rebel.mp3
  91. H

    Videoclip demonstrating the Axe FX' dynamics

    Allrighty, I just used one patch, simple "Brown" model with a tad of reverb, and used the volume pot on my MM Axis to go from clean to full on lead. Amazing how the Axe cleans up and gives a fully transparent, quacky clean tone on such a high gain patch! Watch for yourself...
  92. H

    My attempt on the Stairway to heaven solo

    This is an Epiphone Les Paul which is loaded with Bare Knuckle "Black Dogs". Axe played through power section of Bogner Shiva into ported 2x12 with a G12-65 Heritage, mic'ed with a single SM57. In the Axe I used Plexi 1 with pretty much everything modded (Damping, Transformer, LowFreq etc) and...
  93. H

    Happy new year - Ultra played through Bogner Head and Cab

    Been using my Shiva head (power amp in) through the Bogner 4x12 Hmmm, maybe I should do some IRs of this combo (the head and cab). In the Axe I mixed an UK800 boosted by a drive module and a US Lead 2 pure. http://bareknucklepickups.co.uk/forum/i ... ttach=5199
  94. H

    Some shredding on a BROWN

    me likey brown muchos, here it's played with a MM Axis and a BKP MiracleMan pickup, recorded with one single SM57 on a V30 (in Bogner 4x12) http://www.klangforschungszentrum.de/te ... lds_MM.mp3 edit: please also note the dynamics when I turn down the guitar volume in the middle...
  95. H

    The Pocket Axe

    I want one. Now. For XMAS!!!
  96. H

    Comfortable Axe (Solo100 with AC30 ToneStack)

    Quite bright, but it's a fun combo. Played with a stock MM Axis FR model. Recorded through an SM57 on Bogner 4x12 and an E609 on a Greenback in a ported 2x12 (panned hard left hard right). The FX are in the Axe, so they were recorded with the mics too, which makes it a bit lacking punch in the...
  97. H

    Sick Magic Woman (Fusion Amp)

    Kind of a sick version, and I'm not quite sure if I like it or if it is too much off. But the tone is thick :mrgreen: This is a Hamer Sunburst / FR with some Bare Knuckle Cold Sweat pickups, through Axe, into Bogner 4x12 (SM57 on a V30) and Heritage 2x12 (Sennheiser E609 on a G12-65H)...
  98. H

    Ampeg SVT => 15" SR

    another attempt on playing and recording bass using the Axe direct into mackie mixer and HDR: http://www.klangforschungszentrum.de/temp/fleaish.mp3
  99. H

    Track with 1xBass and 2xGuitar from the Axe

    Here we go, now I haven't got much experience with playing or recording bass, balance is tough to get right, especially I can't get the bass heard on my macbook speakers ... well, anyways, much better bass than I could have done with my old rig - the Bogner Shiva :lol: Guitar amp models are...
  100. H

    First attempt to record some bass (SVT / 8x10 model)

    Played this direct with my spankin new Ibanez BTB 670. Yes I am guitar player and yes I used a pick, this 2 finger technique with the right hand doesn't yet really wanna work for me ... yet :) http://www.klangforschungszentrum.de/temp/bass.mp3 Please be nice, I play bass since 1 day, and have...
Back
Top Bottom