footswitch

  1. M

    Wish Names for Block Channels

    Would it be possible to be able to name the different channels in an effects block? I think would add some great functionality. If you are inc up or down in on an FX block the foot switch would to show the name of the block I'm currently on. Very useful in switching amp channels. This...
  2. Alter//Earth

    Midi in issues and questions

    I recently bought a Ground Control Pro to use with my Axe-FX3 and spent a couple hours going through both manuals to set this thing up. No matter what i did my Axe3 would not see any incoming midi signals. I tested with MIDI-OX and chose my 1824c as my midi input and i could see all midi...
  3. gaaarfild

    Reset Per-preset effect on scene change

    I have 1 footswitch dedicated to turning the delay block on and off with a Per-preset Override. But also, every time I switch to any particular scene, I want this delay block to become the default state for this scene. It usually works like that until 1 moment: 1. I'm on scene 1 with delay...
  4. V

    Bug? Footswitch conflict

    Hey guys, I'm running fm3 with 2 external footswitches, Boss EV30 on pedal 1 to control wah, and a boss FS7 on pedal 2 running two stand in switches, taps are to change view and holds are tuner and delay bypass/engage. Whats happening is, when I press the B footswitch on my FS7, it is doing...
  5. Drew Warmington

    Use case for an external footswitch?

    Hey everyone, I've got a Mission SP-1 that I use as a dedicated volume pedal with my FM9, as well as a separate dedicated Wah. Question that I have is, since the SP-1 has a footswitch, and since the FM9 has 3 input jacks, is there a use case for the footswitch? I've seen lots of video's on...
  6. vz42

    [fixed] Assigning Controllers "channel toggle" to Per Preset FC issue

    Hi, I've just experienced a weird behaviour: If I assign the Controllers "effect" channel toggle function to a per preset fc, it does not will work. The colour led doesn't light up (the 3rd footswitch on the picture), and if I press this footswitch, the LCD display says: Control NOT IN THIS...
    • vz42
    • Thread
    • channel switching controllers footswitch per-preset
    • Replies: 9
    • Forum: FM3 Bugs
  7. J

    FC-12 shared between two guitarists?

    So my band is currently using the Axe FX3 to run two guitars and a bass. Guitar 1/Input 1 Guitar 2/Input 3 Bass/input 3 The bass is straightforward and doesn't need any effects however the guitars require to switch from clean channel to distortion on a few songs and occasionally need 1 guitar...
  8. M

    Fixed Footswitches / scribble strips problem + annoying encoder ranges in scene controllers

    Hey, so here's a bug to report from me. It takes some time to be able to replicate this one. I have the non-HP version with FW1.04. After having the unit on for a few hours and editing a preset, testing it, re-editing, the footswitches scribble strips suddenly don't show the labels, but are...
  9. M

    Tutorial: How to make a footswitch with led for Axe fx 2 for soloing boosting without batteries. Photos inside.

    Hi there! First, sorry for my english :sweatsmile: . Usually I'm using a FCB1010 midi controller, but recently I've joined a metal band where I only need a main sound, and a booster for soloing. First, about axe set up: I can activate/deactivate several blocks with just one press. In I/O->ctrl...
  10. A

    Assign MIDI Functions Directly to FC-12 / FC-6 Footswitches

    The ability to directly assign MIDI functions (without control switches or with additional control switches) to the footswitches of the FC-12 would be life changing (or at least gig changing). Being able to assign Note-On, Note-Off, and other messages would let the AXE III be a viable master...
  11. drewfitz11

    Boss FS-6 to switch presets in Axe Fx Ultra

    Just double checking my work here, I'm thinking about buying a Boss FS-6 and have it set to increase/decrease presets for my ultra. Ill be running a TS cable form each output on the FS-6 into the Pedal 1 and 2 inputs on the Ultra. I'll set the FS-6 to latching. One reason I'm asking is because...
  12. creativespiral

    3D Printed External FC Switch Box / Expression Box

    I mentioned this idea in another thread... was inspired by @lqdsnddist build of an external switch box. I modeled a 3D switch box in Tinkercad, to match the profile and switch spacing of the FC-12. Designed it to accommodate four momentary foot switches and two expression potentiometers...
  13. C

    Rough & squeaky AX8 Footswitch

    Hi guys, recently the F3 footswitch for my tap tempo/tuner has been getting real rough and squeaky, when i tap it live i got pretty much slam it and the squeaks can get real loud.....what can I do to remedy this? contact cleaner spray?
  14. gdgross

    Can I do this? (footswitch question)

    In my never-ending quest to simplify my presets and switches, I'd like to set up a footswitch in the following manner: normal function controls amp input gain via a control switch secondary function (0.5sec hold) changes the amp state from x to y and vise versa. Here's the catch - I'd like...
  15. N

    Footswitch Failure in AX8

    Hi Everyone - currently have some serious issues with the AX8 Unit. I have had the unit for ~3 months, I bought it used. Initially had an issue w/ the F3 button sticking, but I reset the firmware and it seemed to correct the problem. Two days ago I began to have issues w/ the other...
    • NoahWVU
    • Thread
    • ax8 failure footswitch s5 s6 s7 switches non responsive
    • Replies: 10
    • Forum: AX8 Discussion
  16. Joe.Buerger

    Wish A Page Function for Footswitches

    That way Page 1 could be 8 effects and page 2 could be scenes/presets or however we would want to set it up. I don't know if this is technically possible on this hardware, but it would be cool.
    • Joe.Buerger
    • Thread
    • footswitch footswitch ax8 footswitch mode footswitch page footswitches page
    • Replies: 2
    • Forum: AX8 Wishes + Bugs
  17. Dobster

    2018 - Midi Raider - Scene Programming, HELP!

    Ahhh... this seems to be an ongoing problem from back in 2011-12 with no answer. It seems to me that there's no way to set up Scenes still and i've scoured the internet for videos/forum tips etc. Just got my AxFXII XL+ and a Midi Raider and taught myself Midi (never used it outside of...
    • Dobster
    • Thread
    • footswitch footswitches midi midi changes midi control midi control / preset banks midi raider midi switching rocktron scene change
    • Replies: 5
    • Forum: Other MIDI Controllers
  18. L

    FCB1010 sometimes not communicating with AxeFX II XL+

    How's it going! I couldn't find an answer anywhere so I decided to reach out since I'm very clueless. I own an Axe FX XL II and a FCB1010 loaded with the Eureka PROM, running them w two MIDI cables. They used to work great together but lately I've been running into an issue where the board...
  19. Ryan Balfour

    MIDI Foot Controllers

    So I am looking for a foot switcher that works with axe FX II that can switch between 4 patches, I know the tech 21 stuff is good but it's not available anymore and I can't get one in UK. Need advice as to what will work with the least hassle. I don't need any more than 4 patches and no less...
  20. G

    Boss FS setup for Axe-Fx III

    Hello, I recently bought my Axe-Fx III, and so far it has been a dream come true. However, I cannot figure out how to get a simple footswitch (Boss FS-5U) to switch scenes. In fact, I cannot get the footswitch to do anything at all. I read through the manual and have searched extensively...
  21. C

    Compatible Footswitch for Axe-Fx III

    Hey guys, while waiting for the FC, is there anything else that can be used with the FX III right now? Say the VL Ground Control or Voes MC-10? Is it difficult to program them to work with the FX III?
  22. Marcin Wojtaszczyk

    ActitoN MIDI 4 way foot controller - phantom power.

    Hi, I just have this footswitch (ActicoN 4) and wander if can plug it to my AXE FX II XL. It has 7-pin MIDI plug out and manufacturer states : "The controller needs a power supply (9-15V AC or DC) or phantom power. Supports phantom power on pin 1&3 or 6&7 (9-15V AC or DC)." I've learned 1A...
  23. Tumatauenga

    Can I use my Egnater Renegade Footswitch with the Axe-Fx III?

    So my III is in the mail and should be here by Friday. This is my first foray into the modeling world, I'm a bit nervous about the price tag, the expenses down the road for foot-switches, FRFR cabinets etc etc if I decide to gig out with it, but I'm pretty excited! I record quite a bit in my...
  24. M.M.

    Help with external footswitch

    Hi all! I had a couple of momentary footswitches lying around the house, and I wired them up in a box with two jacks, so I could have two easy access switches at all times with the AX8 (as I mostly use the scene switching mode). Here is the catch: I've set them up so the controllers reset (PC...
    • M.M.
    • Thread
    • ax8 external footswitch latching momentary
    • Replies: 8
    • Forum: AX8 Discussion
  25. rascarvalho

    Momentary DPDT Footswitch to control Boost

    Hi! I have an MFC101 and I've just got a footswitch loaded with 2 toggle DPDT to connect on it and I'd like to know if it is possible to control BOOST parameter of the AMP Block with it. I'm trying to avoid using an expression pedal for this, but when I used this footswitch, BOOST parameter stay...
  26. POL

    Wish More footswitches assignments

    I would like to have more footswitches assignments. Maybe another page footswitches assignments (selectable from the F switches) to have 16 footswitches assignments per preset.
  27. S

    Footswitch assignment

    Hi, I perform as a solo guitarist/vocalist and I'm looking for a guitar multieffect that would allow me to change sounds during the songs with minimum "stepdance" on the footswitches. I went through the AX8 manual and viewed several videos, but I still have some questions: 1. Can I turn on/off...
  28. A

    Wish More than 2 Midi Footswitches

    I could use more than 2 midi footswitches. For my setup, 4 would be fantastic and add a lot of flexibility. I'm using my FX8 to also drive amp switching on my Mesa Mark V via an RJM mini amp gizmo. I'm using 1 at the moment for my boost/solo selection which works tidily, and I'm having to use...
  29. Retro Rick

    Fixed Bank Up assigned to Footswitch Goes Beyond Wrap

    So here's the problem, if you assign Bank Up to a footswitch, and you have a wrap limit of 3 banks (1-3) pushing the Bank Up Footswitch from Bank 3 should bring you back to Bank 1, but instead you go to Bank 4. Assigning Bank Up to a Function switch does not have this issue.
  30. nebbi

    Wish Footswitch assign Szene 3/4 (5/6, 7/8)

    I would like to assigne FS1=Szene1/2 and FS2=Szene 3/4 gets 4 szenes on 2 FS.
  31. brianv4

    Assign Modifier to a Footswitch?

    I'd like to make footswitch 5 engage the amp's saturation parameter for my plexi preset. Can it be done?
    • brianv4
    • Thread
    • assign footswitch modifier modofiers plexi saturation
    • Replies: 6
    • Forum: AX8 Discussion
  32. Armageddon

    Footswitch status LED is weak

    Hi all Axe FX users ! I am a brand new (and very happy) Axe FX 2 user. I own the XL version and loaded a Quantum 2.0.x firmware recently. I run the Axe FX 2 in 4CM on my guitar amp. My question is about the pedal connectors on the Axe FX. I'm using a footswitch on the first pedal input and an...
  33. Keg8605

    4 button midi footswitch

    So I'm trying to resist doing this but I think it will help my FS layout stay a bit more consistent so I can always select presets and use the AX8's switches for IA's, Scenes and changing banks. I am thinking of adding a 4 button midi footswitch at the bottom to always select presets 1-4 in...
    • Keg8605
    • Thread
    • controller footswitch liquid foot midi peak rjm
    • Replies: 13
    • Forum: AX8 Discussion
Back
Top Bottom