Search results for query: *

  1. Joero6

    WTB (Feeler) Matrix GT1000FX-2U (230v)

    I have one that has less than 10 hours on it. I bought it and never got around to using it u til recently. I decided to go with powered speakers for a smaller rack. I have no use for it now.
  2. Joero6

    FS Sold

    Bought as a backup and never used. In original packaging. 60.00 Shipped in the UAS
  3. Joero6

    Need XA-1 Adapter for Axe-Fx II - Any ideas where to find one?

    Does anyone still need one? I have one I bought brand new as a just in case. Never used. 50.00 plus shipping. Joe
  4. Joero6

    Couple quick questions about external switches and the MFC

    I am looking to do this as well. I have not gotten the tuner to work yet.
  5. Joero6

    FX LOOP

    Boom! One of the kiddos turned it off lol. Thanks Joe
  6. Joero6

    FX LOOP

    Not sure why, but my fx loop is no longer working. When I turn it on, it kills the signal. Is there a setting that might have caused this? Axe fx 2 xl+ is what I have and I run a cable from output 2l to unit and back to input 2l. Have done this in the past with no issues. Joe
  7. Joero6

    Output levels go to's and why?

    There has been a lot of discussions about setting levels and I would like to hear why you do what you do. I use the 2xl+ into a matrix GT100 poweramp which feed 2 4x12 cabs with 85watt celestions wired at 4 ohms. Now I want to know why you set levels the way you do. I have been setting my Matrix...
  8. Joero6

    Help me understand the grid

    Th That is cool, that is like the stuff I have been wanting to try. Thanks Joe
  9. Joero6

    Help me understand the grid

    Yes, I have read the manual several times, but some things still do not make sense or are not explained in a way that I understood. For example, while the manual does show an example of 2 amps running together, it also states to use the cab blocks balance to pan signals hard left and right. I...
  10. Joero6

    Help me understand the grid

    Can you show me an example of this, it sounds like the stuff I am wanting to try.
  11. Joero6

    Help me understand the grid

    Thanks for the replies so far, but I really need somebody to take a sec and explain this a little. I want to start complex signals but do not even know where to start or how that works. I see these signal paths with shunts sticking out that go no where and items coming in and out of the path and...
  12. Joero6

    Help me understand the grid

    Since I bought my Axe fx 2 I have always used it in a traditional manner. One line of the grid from input to output with 1 amp block and effects blocks. I was recently trying something new and split the signal so i had a "Y" from the input to 2 outputs. Not only was it louder, it felt a little...
  13. Joero6

    Instant Access LED use

    Currently using the Axe 2 XL+ in conjunction with the Original Rocktron Patchmate. This is controlled by the MFC 101 Mark 3. I use the Patchmate to control 4 external effects pedals in my rack. At the current moment when the IA's for the 4 external pedals are engaged, I get the green LED...
  14. Joero6

    Instant Access Help

    Currently using the Axe 2 XL+ in conjunction with the Original Rocktron Patchmate. This is controlled by the MFC 101 Mark 3. I use the Patchmate to control 4 external effects pedals in my rack. At the current moment when the IA's for the 4 external pedals are engaged, I get the green LED...
  15. Joero6

    Best way for FX Loop?

    I am using an Axe Fx 2 XL+ into a matrix power amp. I adjust my overall volume using output 1 of the Axe, while keeping output 2 on full. I keep both channels on the Matrix at about 2:00. I run a Rocktron Guitar Silencer noise gate in the FX loop. When I engage the noise gate through the loop, I...
  16. Joero6

    Need help with adding an external MIDI switcher

    Ok, it is working with the PM now. Now, is there a way to make these IA's react like the others in the Axe? Example...save them to come on during specific presets? Also would like it if in the off position the red light was present. Joe
  17. Joero6

    Need help with adding an external MIDI switcher

    Update, I think I got it. I was trying to save more than 1 change at a time and I guess you can't do that. If this is indeed solved, thanks to everybody who chimed in and helped. Joe
  18. Joero6

    Need help with adding an external MIDI switcher

    Nope, just switched them and tried it. 6 works still...7 & 8 still nothing. Weird thing is, when I went to switch it back, they were back on channel 1? Joe
  19. Joero6

    Need help with adding an external MIDI switcher

    6, 7, and 8, are the IA switches I am wanting to link to the P.M. So far only 6 is working. The only thing that happens for 7 and 8 when pressed is the midi in light flashes once on the front panel of the Axe. I press edit, midi, page over 7 times and IA 6-8 are set to none. I page over 1 more...
  20. Joero6

    Need help with adding an external MIDI switcher

    OK so an update. I used the controller mapping and set loop 1 to cc10, loop 2 as cc11, and loop 3 as cc 12. I set IA06 to cc 10 IA07 to cc11 and IA08 to cc12. IA06 works, however, IA 7 and 8 do nothing. Any suggestions? Joe
  21. Joero6

    Need help with adding an external MIDI switcher

    I am not using the loop 8, I have the original version the Rocktron Patchmate.Not sure of the differences. Joe
  22. Joero6

    Need help with adding an external MIDI switcher

    I have the Patchmate set with midi mapping off, program mapping left at 1-1,controller mapping untouched, program change channel on 2, and control change channel on 2. If I am reading this right, the P.M. loops are 10-18 which is 1-9. I have been trying to sync IA 6 to loop 1(10). I am sure I am...
  23. Joero6

    Need help with adding an external MIDI switcher

    That 's what I am trying to do, but I guess I am doing something wrong.
  24. Joero6

    Need help with adding an external MIDI switcher

    I have switched the midi control change channel to 2. I tried switching the IA switch but maybe I am doing it wrong? Edit, midi, page over 8 times, toggle up from IA1 to IA6, parameter over to CC#10 (which my patchmate manual says 10 is the l1/c1 i am trying to activate, save. Nothing. However...
  25. Joero6

    Need help with adding an external MIDI switcher

    Yeah that's what I am trying to get done right now. At this moment when I hit buttons 1-5 it pulls up 1-5 on the patchmate...buttons 6-17 do nothing. I certanly don't want buttons 1-5 to do anything to the patchmate. Not sure what to set the patchmate to as far as the midi options. Somebody said...
  26. Joero6

    Need help with adding an external MIDI switcher

    I run the Axe2XL + with the MFC MK3. I want to control a Rocktron Patchmate. Currently the MK3 is set to have 1-5 as presets/scenes and 6-17 as IA switches. The goal is access the pedals controlled by the patchmate with IA switches. (Example IA 6 turns on and off Patchmate loop one with a noise...
  27. Joero6

    Popping noises during recording playbacks?

    None of my presets use a lot of cpu. I am assuming that it has been the digital clock differences of 41 to 48k. But I am still having trouble with things not staying changed...not sure what I am missing here. I go in and set a sample rate to 48 and save it and does not stay that way? But the...
  28. Joero6

    Popping noises during recording playbacks?

    It seems like when using the Axe fx as the sound card, presonus is not letting me select axe for input and windows for output?
  29. Joero6

    Popping noises during recording playbacks?

    I have my FX 2 XL+ running into my laptop via USB cable. The software I am using is Presonus Studio One 3. At the moment the Axe 2 is set as the soundcard. When I record any audio I get pops and crackles through the recorded audio in various spots. Any suggestions? Also on a side note, is...
  30. Joero6

    PreSonus Studio One 3 and the Axe-Fx 2

    Anybody using the Axe Fx 2 direct to PreSonus Studio One 3 for recording? I am brand new to this software and am finding that not only is the master volume extremely low, I have pops and cracks through the entire recording. I am using the Axe FX 2 XL+ running into my music laptop via usb cable...
  31. Joero6

    Tweaking the Dual Rec

    Not too sure...I was just trying out a few heads I don't normally use. I really should compare the two. Joe
  32. Joero6

    Tweaking the Dual Rec

    Great, thanks for the tips. Joe
  33. Joero6

    Tweaking the Dual Rec

    Going to make a copy of my preset and try the changes you discussed. Joe
  34. Joero6

    Tweaking the Dual Rec

    I just started playing with Recto2 red modern. I am running it stock with the T808 OD (stock) in front of it. I run an FX loop after the head controlling my Rocktron Guitar Silencer. Finally I use the2290 W/ mod as my delay. This feeds to my Matrix power amp into 2 4x12 cabs with 85 watt...
  35. Joero6

    Non-virtual cab setup

    When I said virtual cabs, I was talking about using cab blocks. Should have woorded that better after reading your post. I have 3 full stacks all the same. They are the older peavey cabs with 4x12 85 watt celestions. I love the cabs becase they all all solid wood, no mdf. Just wanted to explore...
  36. Joero6

    Back to the drawing board

    Start with your favorite patch, or if you have one you use for more than 1 song. Turn it up to the level that you would use it in a live situation, and make sure it is as close to perfect as you would like it to be. Then, open your 2nd most used patch ( if there is one), or next patch in...
  37. Joero6

    Rushing

    Sounds really good. Joe
  38. Joero6

    Non-virtual cab setup

    Thanks for all the responses. I am going to give the matrix another shot with the power amp modeling on as well as trying the cab models just to see. I don't remember enjoying it before, but i was still brand new to the Axe at that time and was having trouble dialing my tones. If this does not...
  39. Joero6

    Non-virtual cab setup

    Yeah, I understand that. I just knew that there are a lot of people who run the setup like I do with a power amp and real cabs with great sounding results. I guess they just don't use as many different amps, or tweak the crap out of them? Joe
  40. Joero6

    Non-virtual cab setup

    I was not aware of that. When I first got the unit I tried both but did not hear a difference. COuld have been the preset I picked though. Joe
  41. Joero6

    Non-virtual cab setup

    All good responses and appreciated. Yes, the power amp modeling is off. I was just wondering if anybody had found any work arounds other than switching speaker cabs to FRFR. I bought a Matrix GT1000FX power amp when I got the Axe, but liked my Rocktron Velocity 300 (Older Version) better with...
  42. Joero6

    So Long, and Thanks for All the Fish

    Enjoy the new territory, feel free to send my all your old presets!
  43. Joero6

    Non-virtual cab setup

    Question for those running a power amp to traditional guitar cabs. Have you found any tricks or tips for getting the amp sounds closer to what they should sound like or sounding better when not using the cab blocks. I run my Axe 2 XL+ into 2 4X12 cabs with 85 watt celestions wired to 4 ohms. I...
  44. Joero6

    Needing Grid Help

    Thanks for the help. As far as the question about running from 1 input to 2 outputs...I just was not sure. I didn't know if you had to split the signal to 2 outs for stereo to work or not. In response to the noise gate question, I have just not had any luck with getting the gate to work the way...
  45. Joero6

    Needing Grid Help

    I understand the basics of the grid, but have a few questions. I have not seen a clear explination on this so I am asking here. Since getting my Axe 2 xl+ all of my presets I make have been on 1 grid line from input to output. After looking at others people have made using more than one path at...
  46. Joero6

    Enhancer Block: Amazing....

    I would like to check this out, but I want to make sure I am doing it right. I see a lot of talk on here about running mono vs stereo. I Got my axe FX about 2 years ago, but have not had as much time as I would like to learn it. I feel like I am still stuck in my old way of thinking with rigs...
  47. Joero6

    WTB Rocktron 5-to-7 pin midi cable

    I have one that I bought brand new as a backup and never needed it. Still has the original zip ties and cardboard on it. Model RDMH900 5-7 Midi Cable. DM me if you still need one. Joe
  48. Joero6

    Controlling external pedals

    I am using the Axe Fx 2 XL+ with the MFC Mark 3 controller. I have one of the older Rocktron Patchmate loop switchers ( Black with Red buttons version) that I would like to use to switch in and out a few pedals I own. Is it possible to set up a few buttons on the MFC to be on/off switches for...
  49. Joero6

    Axe FX II Live Rigs

    Also using this setup except I ust 85 watt celestions. I bought the matrix power amp, and ended up switching back to the Velocity 300 as I felt the matrix was missing a little something on the heavy tones. Joe
  50. Joero6

    FX Loop Question

    I have an external noise gate in the FX loop of my AXE FX. When I bring it into the signal path using the MFC, there is a slight increase in volume. If I bypass it using the fron panel, it stays the same. This tells me that the unit is adding a slight boost or gain to the signal path. Is there a...
  51. Joero6

    Advice on using the effects loop

    The Rocktron Patchmate works great too. I used mine for several years to control my rack before switching to the Axe FX. Nine loops or switches on my original model or 8 on the newer version. Now mine just collects dust. Joe
  52. Joero6

    Splitting the signal to different effects

    I run my axe fx to a matrix power amp into two 4x12 cabs. I wanted to try creating a preset that splits the signal to two paths. What I would like to happen is this. Let's say I have just a stock sound that I am using as my dry sound.While playing,I would like to step on one of my expression...
  53. Joero6

    Another learning curve, this time with cabs.

    So I bought the Axe FX 2 XL+ just over a year ago. Like most people who made the jump from regular ams, there was a learning curve. I recently starting getting fairly comfy with making new presets, with only the most minor of issues...all of which have been solved by the great members of this...
  54. Joero6

    Help with a couple special effects

    I would try a flanger for the 1st and bit crusher for the 2nd. I would try to give more details on settings, but I am not in front of the Axe. Good Luck! Joe
  55. Joero6

    Problem installing the new 7 beta

    2.8.1
  56. Joero6

    Problem installing the new 7 beta

    Anybody else get the error listed below? Went to install the new version tonight and it will not install. I am installing this the same way I have always done with no problems before. any ideas? An error has occurred during file transmission. This may have happened because you manually put...
  57. Joero6

    Expression Pedal Help On Downloaded Preset

    Wow...I never knew that was there. Thanks for the tip! Joe
  58. Joero6

    Expression Pedal Help On Downloaded Preset

    That was it! I can't believe I missed that. Thanks so much for the help. That's why I love Fractal and all the helpful Fractal users. Joe
  59. Joero6

    Expression Pedal Help On Downloaded Preset

    On this patch, the expression pedal is used to bring a synth sound in and out of the mix. It works perfect on ext 1. If I move it to another port on the mfc (in this case #4) it does not control the same way. With the pedal all the way back to the off position you can still hear the synth. The...
  60. Joero6

    Expression Pedal Help On Downloaded Preset

    Just changing the ext 1 to ext 4. Not changing any other settings. Yes the dot moves, and everything else has been set up and tested.
  61. Joero6

    Expression Pedal Help On Downloaded Preset

    I recently downloaded a few user presets for fun and found a couple that I thought about using as a starting point for a few songs. In this particular preset, there is an expression pedal attached to the level on the synth block. The preset works great this way, however when I switch the...
  62. Joero6

    Lost preset

    Somehow, when moving presets around we lost power. The preset I was moving was the warped vinyl one. It is now gone since turning the Axe back on. Is there a way to just get that 1 preset back without having to reload an entire bank? Joe
  63. Joero6

    Anyone else using 4 Expression pedals? Need a little help.

    Same here lol Joe
  64. Joero6

    Anyone else using 4 Expression pedals? Need a little help.

    Thanks so much, that did it. Joe
  65. Joero6

    Anyone else using 4 Expression pedals? Need a little help.

    Not sure what I am missing, but I am sure it is simple. In the above mentioned I/O CTRL Menu, ext 1 is 16 ext 2 is 17 three is 18 and 4 is 19. Do these need to be changed because 1 nad 2 work fine. What am i Missing, or is it something I changed in the MFC? Joe
  66. Joero6

    Anyone else using 4 Expression pedals? Need a little help.

    New Axe fx 2 XL -MFC Mk3 user trying to get this thing set up the way I want. So far I have 2 pedals working the way I want. Port 1 on the MFC has a Dunlop DVP3 acting as a volume only pedal. Port 2 has a Mission SP1 for a wah only. The Sp1 also uses the Switch 1+2 port so I can use the toe...
  67. Joero6

    XLR Cable

    Really? Nobody?
  68. Joero6

    XLR Cable

    Is there a length on the xlr cables that is too long for use between an Axe fx 2 xl and the mfc Mk3? Will up to 100 ft be ok without any lag or issues? Thanks Joe
  69. Joero6

    Anyone not a fan of Quantum 6?

    I have a noob question about this. When I download the latest version for the xl+, I install it with the Fractal bot. Once it's in the axe, It tells me to shut it off, wait a few seconds, and turn it back on. Am I done at this point, or do I need to reset something in the axe for the new changes...
  70. Joero6

    Making a switch hold?

    I have my MFC set up with buttons 1-5 as presets & 6-17 as IA's. Is it possible to have the MFC hold a switch while scrolling through the up/down menu? In other words, .......If I am on preset 5, and i want to bank up to the next bank and hit preset 7, is there a way to not have the mfc change...
  71. Joero6

    Problem using the Mission SP1-R

    That worked, thanks so much! Joe
  72. Joero6

    Programming new presets to preset numbers

    Turns out the problem I was having , is that the Total Sync was on. Hope this helps others with the same problem I was having. Thanks to all that helped me figure it out. Joe
  73. Joero6

    Programming new presets to preset numbers

    So far, I am not losing anything as I have been moving presets around in the axe edit using the copy and paste method. Just figured it woud be quicker for me there was a way to do it like setting up the IA switches on the MFC. I think the part of the manual you suggested might be what I was...
  74. Joero6

    Problem using the Mission SP1-R

    Thanks man, bought my XL+ about 7 months ago, but had to wait on the MFC to be in stock again. So I am really new to to program part of this. Joe
  75. Joero6

    Problem using the Mission SP1-R

    OK, I'll see if I can figure that out and give it a try. Thanks Joe
  76. Joero6

    Problem using the Mission SP1-R

    I am not concerned with using the pedal as a wildcard, as I have 4 expression pedals. 3 are dedicated pedals. One for volume, Wah, and Whammy. The 4th controls anything else so it works when I need an extra function.
  77. Joero6

    Problem using the Mission SP1-R

    Nope, tried that. Joe
  78. Joero6

    Programming new presets to preset numbers

    I know how to program scenes, I am asking about presets. If you open axe edit, and scroll through your list of presets...how do you get them to recall with the number you want? If i want to hit preset button 14 and have it bring up preset 77, do I have to move 77 to the 14 slot, or is there a...
  79. Joero6

    Programming new presets to preset numbers

    I just want to be able to assign the presets to the preset numbers like I do when setting up the IA switches. Joe
  80. Joero6

    Problem using the Mission SP1-R

    I have this hooked up to the MFC in the EXP 2 slot, and the1+2 switch inputs. I am using the pedal like a tyraditional Wah pedal with the switch turning the effect on and off. Everything works fine except the led is on when the pedal is off and off when it is engaged. Anybody else run into this...
  81. Joero6

    Programming new presets to preset numbers

    I have my MFC set up with 1-5 as presets and 6-17 as IA switches. I know how to change the IA switches using my MFC if I want to switch the out or around on the board. How do I switch the presets? Example: If i want to hit preset button 4 and have it bring up preset number 122. The only way I...
  82. Joero6

    Ibanez LF-7 LO-FI Pedal equivalent?

    Would you mind sharing what you did? I have been trying to get this sound as well. Thanks Joe
  83. Joero6

    Name Timeout error on new Mk3

    Problem Solved, thanks for the suggestions guys. Joe
  84. Joero6

    Name Timeout error on new Mk3

    Yes, both set.
  85. Joero6

    Name Timeout error on new Mk3

    I have a new XL+ that I bought about 5 months ago. Just bought a brand new MK3 and am trying to connect the two together. I have been up and down through the forum as well as the manual, quick start guide and you tube videos with no luck. Currently running a xlr cable from the faslink port (mfc)...
  86. Joero6

    AxeFX II XL+ in stock.......whooops out of stock???

    Waiting on one as well. Joe
  87. Joero6

    First time buyer : XL worth it?

    I debated on the same thing as you for quite some time. I went ahead ang bought the Axe 2 XL +. The way I ended up looking at it was that I would have the most up to date I could get with the most room to try out new things. It took me about a week to get a tone I was really happy with. Now...
  88. Joero6

    Why no Effects Forum?

    That's part of the point though that I think a lot of people are missing. If there was a place that was just for effects blocks...be it in the form of a sub forum or a section in the axe-change we could browse. That is not really a viable option right now. I can browse presets all day long, and...
  89. Joero6

    Why no Effects Forum?

    I just didn't want it to come across wrong like I was being demanding or rude. I just feel it is missing and could be very helpful to a lot of people. Joe
  90. Joero6

    Why no Effects Forum?

    Understood, I just wanted you to know I was not trying to be demanding or a Dick about it. I was just seriously curious why. I guess I just veiw Presets and blocks as two seperate monsters and wondered why each didn't have their own spot. Joe
  91. Joero6

    Why no Effects Forum?

    The preset exchange is ok, but it makes it hard to just scroll and find new stuff. No offense intended, but all I usually find in there are eighties metal presets for the most part...which is fine just not what I am searching for. It is more rare to just have somebody go..here is how to get the...
  92. Joero6

    Why no Effects Forum?

    This was an actual question with no "tone" implied. I am fairly new to the Axe, and after digging in deeper, saw haw difficult it was to track down effects blocks without a ton of digging. Just wondering why effects would not be a standard forum like cabs and amps. If we have a forum for full...
  93. Joero6

    Why no Effects Forum?

    That's exactly what I am talking about! Joe
  94. Joero6

    Why no Effects Forum?

    I agree with everybody on this. The reason for this post is as follows. With the Axe Fx, if I wanted to sound like Let's say Eddie Van Halen, I can go to axechange or the tone match sub, or the preset exchange. DONE! If I want to tey out a new Amp, I can pretty much do the same thing, or install...
  95. Joero6

    Why no Effects Forum?

    I agree, because all questions have a place. I also understand where people post where they want and it is not always in the right area. But no effects sub at all? To me that is just weird....I don't normally look for a complete preset tone, just new effects to play with so I do think effects...
  96. Joero6

    Why no Effects Forum?

    That's what I would like to see. Joe
  97. Joero6

    Why no Effects Forum?

    As a sub, not a thread. Joe
  98. Joero6

    Why no Effects Forum?

    Apparently, a while back there was The Mother-of-all-pedal-and-effectemulations-thread for Axe-FX II. This is what I would like to see again! Joe
  99. Joero6

    Why no Effects Forum?

    I understand what you are saying, but I don't feel it's always the case. I understand that people post things where the want. Sometimes they get moved to the right sub, sometimes not. However, when I go to preset exchange sub...it is mostly presets. So if I choose to, I can just scroll through...
  100. Joero6

    Why no Effects Forum?

    I don't agree with you on this one, and here is why. By your logic, you consolidate subs into fewer forums being model specific (Axe,Axe Ultra,Etc). All this does is force you to search even more...Now while I will agree that the search tool works great this still adds to the existing problem...
Back
Top Bottom