Search results for query: *

  1. Billbill

    AxeFx2 into tube amp FXL… ideas?

    Hi everyone, So yesterday I was playing around with my AxeFx and Mesa Boogie MkVII head and running the axe in the FXL of the Mesa. Finally got it working and it seems pretty decent thus far, especially using the PEQ for even more EQ options and pitch block and even the enhancer block though...
  2. Billbill

    Can I leave front input connection while using rear input?

    I’ll have to try and see. Thanks for the help! Bill
  3. Billbill

    Can I leave front input connection while using rear input?

    Copy thanks so much I appreciate the help Sir! Reason I’m inquiring is because I have two different rigs both going to my rig switcher “A rig” is my AxeFx2/Matrix and “B rig” is my Mesa MkVII head and I am going to try more experimenting with trying to run the axe in the FXL of the Mesa head...
  4. Billbill

    Can I leave front input connection while using rear input?

    Thank you sir for the fast response but is it ok to have cables plugged into both front and rear simultaneously as I flip between my uses for each?
  5. Billbill

    Can I leave front input connection while using rear input?

    Hi all, This might be a technically weird question so excuse my ignorance on the matter. Was wondering if while I’m using the AxeFx front input, and then switch in I/O to the rear input, can they both stay physically connected? I know one will mute the other depending on the setting so I assumed...
  6. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    Damn after reading the book again it appears that the grid’s left main input block is by default INPUT 1 so if the AxeFx input is muted from my switcher than no signal will pass through the grid to reach the FXL block to send signal to output 2! So I guess it can’t be done. Damn there’s gotta be...
  7. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    I’m not apparently because I’m not hearing any of the effects I put on the grid in front of the FXL block. Is this something in I/O that I didn’t set right? Input 2 was set to L mono I think and out2 set stereo and I believe they were defaults so I just left it alone.
  8. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    That’s pretty much what I did except I used input 2/output2 because input 1 and output 1 are being used already.
  9. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    Input 1 on the AxeFx goes straight into an amp/cab selector so when I have “amp1” selected on the switcher I can run the AxeFx stereo output 1 L/R into matrix rig. Switch over to “amp2” on switcher and it mutes axe input 1 so I can run the Mesa Mk7 with the same cabs, L&R. This completely...
  10. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    ok, tried it -Didn’t work:( Ran axe out2 left into Mesa FXL return and axe in2 left to Mesa send. Blank shunt with FXL block at end with “test delay” block at beginning. Adjusted out 2 front knob but all I’m hearing is the normal Mesa tone, nothing in the grid is being heard through the Mesa...
  11. Billbill

    AxeFx2 / Mesa MkVII FX loop question

    I’ve read the good book and searched online for using the AxeFx for ONLY effects with all effects going straight into the Mesa head. Not 4CM because I want full use out of the Mesa head, not trying to bypass preamp stages or whatever. How do I do this via input or output 2 without connecting...
  12. Billbill

    Output 2 FXL question with real amp help

    I’ll try that. 1) The reason I must make sure output 1 is completely muted is because I have output 1 going into the matrix so, input/output 2 need to run through the MkVII FXL for effects and the MkVII is using the same cabs as the AxeFx/matrix uses, just separated by the amp/cab switcher I’m...
  13. Billbill

    Output 2 FXL question with real amp help

    Hey folks hope y’all doing great. Quick question: I have my AxeFx output 1 L/R going out to matrix poweramp. I want to use the effects only in the AxeFx via input/output 2 to go into the Mesa Boogie MkVII head. Is there a way to do this while muting AxeFx output 1? Input & output 2 should be...
  14. Billbill

    AxeFxII and tube amps- finally built my dream rig thanks to De Lisle Guitar Co. for their help..

    Yeeeeeeahh, after cabling up the 12 loop switcher to all the pedal drawer crap was way more labor intensive than I had ever imagined lol. Going any further with cabling was not an option at this point in time lol. Some day….
  15. Billbill

    AxeFxII and tube amps- finally built my dream rig thanks to De Lisle Guitar Co. for their help..

    Lol right? Actually 1 cable and it could be integrated in. Pigs actually sound great when micd and are great at coping that ol Tweed Deluxe thing.
  16. Billbill

    AxeFxII and tube amps- finally built my dream rig thanks to De Lisle Guitar Co. for their help..

    Hey folks, or whomevr mgaf, check it out. Built my dream rig probably weighs about 400lbs but I lift so it’s cool lol. I’ve Integrated my beloved AxeFxII/Matrix “stereo” rig with my pedals and Mesa MkVII. I can switch between the two on-the-fly and use the MFC to control it all! Oh and incase...
  17. Billbill

    Input 1 vs input 2 question in a complicated rig

    Thanks Chris that’s refreshing to hear that this should be possible as I was hoping. And yes, the switcher would be muted at the AxeFx input which I presume is to avoid sending signal through two different poweramps and blowing up cabs lol. Are there any AxeFx I/O settings I would need to change...
  18. Billbill

    Input 1 vs input 2 question in a complicated rig

    Hello all, I posted much more detailed info and schematic of the rig in the “Rigs and Routing” section, but I figured that it likely won’t get any responses due to lack of clarity, so I figured I’d shorten the question and ask it here. In the AxeFxII XL+ I’m currently using in stereo outs from...
  19. Billbill

    Rig build schematic overview. Thoughts? Advice?

    And the other question I have is how does input 1 differ from input 2 as far as the FX loop is concerned? Reason I ask is because in the “switcher rig” ^^^ I may want to use the AxeFx for effects only and have custom presets made for this application when switching over to the Mesa MkVII head...
  20. Billbill

    Rig build schematic overview. Thoughts? Advice?

    Hi all, I posted about this idea in the past here but couldn’t find any solutions and we were all sorta stumped to say the least, lol. Idea is to, well, check my schematic below and you’ll get the jist of it. Concept is to use my AxeFx/Matrix stereo rig with two cabs left and right, but then at...
  21. Billbill

    Confused about AxeFx FXL with real amp question

    Thanks for the suggestions man I appreciate the help. Definitely going to have to monkey around with it a bit we’ll see.
  22. Billbill

    Confused about AxeFx FXL with real amp question

    Yep, nothing at all thanks 😂
  23. Billbill

    Confused about AxeFx FXL with real amp question

    Anyone? 😬
  24. Billbill

    Confused about AxeFx FXL with real amp question

    Hello all, Firstly, I read the manual but still stumped lol. I currently run my AxeFx 2 XL+ stereo Out1 L/R into Matrix GT1000FX L/R outs into each cab one on my left and other my right. I was able to score a Soldano SLO30 power amp 30w head for a great price and I want to try and run it with...
  25. Billbill

    Might buy myself an AxeFx III for Christmas….

    Agreed, lol
  26. Billbill

    Might buy myself an AxeFx III for Christmas….

    I cannot get rid of my AxeFx II XL+ running old ass Q6.03 FW it sounds awesome as heck!! Never upgraded it, never will; Too much time invested into creating too many custom presets, IRs, TMs, and all kinds of super fun stuff. Fast forward almost 10yrs later and still love the machine. I’m...
  27. Billbill

    XL+ FXL block, a delay, and RJM switcher help

    Hello folks, Quick question. I have an old AxeFx2 xl+. I’m using a rack switcher to switch loops running straight into the XL+ front input. Now I have a boss dd3 delay that I want to run in the same way I had with my old tube rig it was in the amp’s FX loop. I never used the FXL block in the...
  28. Billbill

    Music Nomad F-One oil = REGRET!!!

    Actually it’s just a plain, non scented candle stick.
  29. Billbill

    Music Nomad F-One oil = REGRET!!!

    Yes exactly!! Oiled wood is a horrible feeling to me. I waxed my other fretboards but the guitars with the music nomad oil the wax won’t take to it.
  30. Billbill

    Music Nomad F-One oil = REGRET!!!

    Fellas, this is not a case of a sticky gum-like grime. I’m well versed in scraping off gunk. I know how to clean, care for, and do professional level guitar work. This case boils down to a dry grippy feeling board after use of Music Nomad F one oil. It’s friction between fingers and the board...
  31. Billbill

    Music Nomad F-One oil = REGRET!!!

    Update: Bought some Dunlop 65 lemon oil today and applied it to a raw area of my test subject and over the area that has the nomad conditioner. Same nasty dried out grippy feeling. Idk, I guess maybe I just don’t like what everybody else likes. I like my rosewood and ebony boards to feel very...
  32. Billbill

    Music Nomad F-One oil = REGRET!!!

    Hmm interesting. I have a test subject guitar that I use for experiments and applied the music nomad “conditioner” to it as well and of course same grippy/rough feeling after oiling and buffing out. Ugh. Now I’m testing to see how to get that crap out of the wood and have been unsuccessful...
  33. Billbill

    Music Nomad F-One oil = REGRET!!!

    Yea you and about 50000 other folks on Amazon reviews lol. I guess folks have different expectations I expected an improved feel after this “conditioning” (kinda funny they even use that word), and most others like you probably went for aesthetics and want a darker fretboard.
  34. Billbill

    Music Nomad F-One oil = REGRET!!!

    Yeah it will clean it enough to strip off the woods external oil coat. It’s a stripper not a conditioner. What can u feel about the wood that tells you it’s conditioning it?
  35. Billbill

    Music Nomad F-One oil = REGRET!!!

    Short story for ya, aka rAnT! I never bought into the hype of all this “conditioning and oiling” of unfinished fretboards. I believe that unless you live in an igloo or are of indigenous living conditions, one should never have to do any of that oiling gimmick crap! So I picked up two bottles...
  36. Billbill

    Quality of Fender Rosewood fretboards

    Another weird random fact I learned today lol. That’s crazy it actually sinks ! Can’t wait to tell my wife when she gets home 😂
  37. Billbill

    Quality of Fender Rosewood fretboards

    Yeah ebony is my favorite because it looks gorgeous and feels very much like maple to me. Interesting thanks for sharing
  38. Billbill

    Quality of Fender Rosewood fretboards

    Ugh ok go away bruh lol
  39. Billbill

    Quality of Fender Rosewood fretboards

    Did u look at the pics? The fiesta is only a year old and has a rather grippy board even after oiling it up vs. the ‘91 maroon strat that hasn’t been played in 10+ years, never oiled and that board feels like butter or almost like a glossed maple board which is what I like. Idk, maybe RW boards...
  40. Billbill

    Quality of Fender Rosewood fretboards

    Hey folks, just wondering, have you guys ever noticed how the quality of Fender’s RW boards has varied over the years and even the custom shop can sometimes be hit or miss when it comes to that rosewood quality? To me, a quality RW board is smooth almost like ebony in a way that fingers glide...
  41. Billbill

    How do you setup your guitars?

    I gotten away from measuring neck relief for the sake of an annual adjustment unless I plan on doing a major change like refret bridge or nut removal/replacement, and knowing that number is just for maintaining a speedy workflow. Basic adjustment of my own instrument is more so touch feel and...
  42. Billbill

    How do you setup your guitars?

    I went from elixirs to stringjoy because Stringjoy has the BEST customer experience than ANY other manufacturer in the world the website and ease of use especially when literally building a complete custom set any way you want it in less than 10 seconds and saving that to a profile for even...
  43. Billbill

    How do you setup your guitars?

    Thanks for clarifying that for the community. I’m enlightened by not only that fact that you clearly understand what I meant, but are far more experienced with measurement than i would ever need to be. Good job
  44. Billbill

    How do you setup your guitars?

    Hello FAS family, After some 35yrs of playing I realized few weeks ago that I change my guitar setup as I age. When younger I was all about super light gauge strings usually 9-42 Elixir and now being 40yrs old I just can’t do it very uncomfortable. Low action and light strings just almost...
  45. Billbill

    AxeFx II XL+ ceiling fan- output lights flicker?

    Yeah it’s definitely strange. It’s not really generating any unbearable noise or anything I just thought it’s weird that the input lights flicker when it happens and this is with output knobs completely off. So the AxeFx is seeing something on input left channel every time the fan it’s turned on...
  46. Billbill

    AxeFx II XL+ ceiling fan- output lights flicker?

    Hi all quick question. Today I noticed something strange. When my rig is on and I turn on my jam room’s ceiling fan the input lights on the AxeFx just the left side flicker up every time I start the ceiling fan, they flicker up again when I turn fan off too. Kind of strange because I’m not...
  47. Billbill

    Les Paul, Wiring issue, Pup issue, has no balls!

    Thanks guys for all the input! I really appreciate it. I will redo some soldering as suggested here, but definitely NOT buy a cheap harness especially if it’s sus per your observations because I trust you guys know more about tinkering on this level than I do.
  48. Billbill

    Les Paul, Wiring issue, Pup issue, has no balls!

    I thought they made good stuff based of my research. Is that not the case? Enlighten me
  49. Billbill

    Les Paul, Wiring issue, Pup issue, has no balls!

    I was not aware of that. I will check that tomorrow thanks for the info.
  50. Billbill

    Les Paul, Wiring issue, Pup issue, has no balls!

    Great thanks for that info I appreciate it! I think I might drop in one of them “vintage 50’s” aftermarket wiring harnesses made by Carparelli with them “bumblebee” caps, and then wire the Sheptone pups to that and see if that solves it. It’s hard to believe how ridiculously weak these pickups are
  51. Billbill

    Les Paul, Wiring issue, Pup issue, has no balls!

    Hi all, Here’s my Gibson LP, she’s nice looking and almost sounds dead. My CS’64 relic strat sounds way beefier and no LP on this earth should sound weaker than ….anything really lol. But we all know this already so here’s my issue: I’ve owned many LPs over years and done many setups so this...
  52. Billbill

    MFC101 backup quick question ..

    Yeah I have a midi cable going from the rjm effects gizmo midi in to AxeFx midi out I believe. There was a setting in I/O that I had to enable that to work I think so when I opened Bot it was prompt me to select midi in/out but I thought it would still work to backup mfc with FASlink between...
  53. Billbill

    MFC101 backup quick question ..

    Hello all, So I have a question about using Bot to backup MFC101 mark3. I never backed up the MFC yet but after spending hours programming it to work with rack RJM effect gizmo I don’t want to waste time programming again if something crashes. I currently have the MFC ran to AxeFx2 via FASlink...
  54. Billbill

    Pedals auto-turn on with switcher and power supply

    I’ll definitely have to contact the makers before I buy and ask about that .
  55. Billbill

    Pedals auto-turn on with switcher and power supply

    Thanks for your insight
  56. Billbill

    Pedals auto-turn on with switcher and power supply

    My Expresso FX vintage style bc108 Si fuzz and the Boss CS3 compressor come on automatically but the boss fz2 hyper fuzz, two WayHuge swollen pickle fuzzes, and Trex Crunchy Frog that I have do NOT. Very annoying. Maybe if there’s a term that would describe this phenomenon someone could tell me...
  57. Billbill

    Pedals auto-turn on with switcher and power supply

    Yeah. It’s something new to me as I’ve never had racks with switchers before but this is pretty darn annoying I must say. I’ll have to tinker some more and see what happens if I try a strong zip tie holding the switch down maybe idk lol. Very annoying but owell
  58. Billbill

    Pedals auto-turn on with switcher and power supply

    I got my switcher in rack all setup (except for the pedals to rack switcher connections), they are all powered by Voodoo Labs pedal power 2+. I noticed when I turn on the power conditioner that the VL pedal power turns on but only 2 out of 7 pedals power up automatically. I have to pull out the...
  59. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Ok I’m back lol. Updated with drawings. Here’s the idea I’m trying to accomplish. AxeFx in stereo to a stereo matrix poweramp then into a left cab and a right cab, switch from the AxeFx/matrix rig to a fryette stereo poweramp at the click of a switch but using the same two cabs left and right...
  60. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Per switch? That’s great to hear! I only configured 1-7 for the AxeFx so all the rest I can configure to switch pedals. Thanks for the help.
  61. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Another quick question; after reading the MFC101 mk3 manual I’m wondering, can “AxeFx Mode” for the IAs be set on a per switch basis or is it every switch? Reason I’m asking is because I only use bottom 1-5 for scenes and up/down scroll through presets. I’d like to be able to set all the other...
  62. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Awesome. Thanks for the support my friend.
  63. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Thanks for the detailed breakdown and great setup ideas. I think I’m just gonna buy the RJM LT foot switcher and have that beside my MFC for an easier setup. New question; how does the switcher connect to AxeFx and Matrix poweramp is it just a midi cable from RJM effect gizmo to AxeFx midi in...
  64. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Now that’s the type of detailed direction I’m looking for, thank you my friend! I’ll read it now. Oh and what I meant by “page over” on the MFC was keeping it functioning like I have it; 1-5=scenes, and all the rest are on/off for blocks in some presets. Page over I meant being able to reassign...
  65. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    I tried. Manuals are complicated when one has very little experience programming MIDI devices but I’m sure I’ll figure it out- I figured out how to set IAs 1-5 = scenes and I scroll through presets with the up/down buttons. And set some IAs to be specific blocks. But with the RJM getting devices...
  66. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Turn off AxeFx mode from the MFC101? I still want to use my MFC101 to control my AxeFx too though.
  67. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Anyone?
  68. Billbill

    MFC101 MkIII with RJM effects gizmo-possible?

    Is it possible to control the RJM Effects Gizmo with the MFC101 MkIII?? I’m running 6-8 pedals in independent loops with switcher but didn’t buy a dedicated controller for the RJM. Should note that I’m running whatever FW was stock on both my AxeFx 2 and the MFC circa 2015, not sure if the RJM...
  69. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Or hell, even some kind of work around for the amp switcher to have a L/R from both poweramps going to both L/R cabs. Even thought of getting TWO small floor board switchers from Radial (they make the most compact switcher), to see if that will work because the switching of poweramps doesn’t...
  70. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    I like the RJM effects gizmo because it has 12 loops vs the typical 8 like most switchers: I just need independent control of each pedal each it’s own loop. Can the MFC101 control the effects gizmo to fire each pedal? The stereo amp switcher with stereo L/R from the Matrix is another battle...
  71. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Yes!!! I want to switch from AxeFx/Matrix (stereo) to Fryette preamp-poweramp (stereo). Each setup would share Left and Right cabs. The problem is that the stereo poweramps would be sending a Left AND Right signal into the switcher. I have not seen or found an amp switching device that would...
  72. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    A tech from RJM reached out said effect gizmo cannot handle speaker level signals and would damage its relays:( I guess I’ll have to find an amp/cab switcher for the stereo matrix poweramp that can handle the L/R outs of the matrix. So far haven’t found ANY ! Damn:/
  73. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Wow I just checked it out man that thing looks like exactly what I need even mentions stereo in a few of the diagrams. Not sure if I can use it for amp switching through the same cabs I might need a dedicated amp/cab switcher or just run TWO of these RJM Gizmos in parallel to accommodate. I...
  74. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Yeah I didn’t know the MFC can control a rack loop switcher lol . Also yes you’re correct about the cabs and thanks for touching on that too, I do intend to run the same two L/R cabs with this setup. I’ve been looking at the KHE, ACS, and Kahayan amp/cab switchers for that that offer fx loops...
  75. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Yes absolutely! I want to rack mount my pedals and also switch between running guitar>pedals>axefx, to guitar>same pedals>fryette poweramp/preamp. Signal chain is as follows: Guitar>6 pedals all chained in series>AxeFx II input>MatrixGT1000FX in stereo>L/R cabs. With the pedals in rack drawer...
  76. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Others have suggested many pedalboard midi switchers for this but there has to be a controller in the rack right?
  77. Billbill

    Pedal/switcher nOOb loop question. hElLp:(

    Hey all, I want to take all my pedals off board and put in rack drawers where they’ll stay. It’s 6 pedals between the guitar and front of AxeFxIIXL+, pretty simple right? My floorboard will just be my MFC101 and a pedal switcher thingamajig IF I understand this switcher or loop switcher thing...
  78. Billbill

    Pure nickel string users….

    What’s the general consensus of the pure nickel round wound strings vs nickel wrap modern steel strings. Has anyone made the switch to pure nickel indefinitely? And if so, why? I’ve realized that sometimes I have noticed the imbalance of “modern” strings which can be irritated when playing and...
  79. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Do you have a separate amp from the AxeFx?
  80. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Great info! So to sum it up sharing 6 pedals between two rigs, AxeFx/matrix/two 212 cabs, tube poweramp with pedals in between, that poweramp still needs to use the same two 212 cabs. To simplify things I think I’ll keep the MFC101 and run a switcher on the board that’s capable of switching from...
  81. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Wow nice setup man!!! So u use that floor switcher to control the AxeFx and a separate switcher for the pedals? That’s what I’m actually trying to figure out how to do.
  82. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Hmm interesting. Yeah merging the “digital” and analog worlds into one is going to require some in depth research. Maybe I’ll try and contact Mr. Bradshaw with a schematic of the idea
  83. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Yeah it’s basically two rigs in one with the AxeFx, Tube Poweramp, pedals, and floor controller with the idea to switch between all via 1 controller and also control pedals at any given moment with either rig. Gonna take some time I suppose. Thanks for your input.
  84. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Ehhhhanyone?
  85. Billbill

    General tonematch block question

    Phew! Thanks yek! I almost had a panic attack because I have a bunch of old presets with tonematch blocks that I thought would be jacked up. I’m happy. Thanks
  86. Billbill

    General tonematch block question

    This is prob a stupid question but I have an AxeFx II XL+ and was wanting to know does the TM block save it’s match data for each preset it’s used in individually, meaning if I throw a TM block in patch, match something and save it in preset “001” then make a new preset “002” load TM block and...
  87. Billbill

    Any AxeFx/rig routing Masters, advise needed-rig rebuild.

    Hey all hope you’re all doing/sounding great! I’m redoing my rig and need some advice on what I will need and if this is even possible. I’m still reading up when I can and trying to learn about the AxeFx. Current rig is this: simple, I run guitar into a boss cs3>few different fuzz...
  88. Billbill

    Buffer required?Axe Buffer variable thing

    Hi all, I don’t know much about impedance or buffers other than lower imp is better and buffers act like a signal “pump” on long runs. I’m trying to improve my sound so was just researching trying to see if the rig could benefit. I also read something about the AxeFx having some kind of...
  89. Billbill

    Best ROOM mic recommendations please

    Thanks everyone for all the info and suggestions!
  90. Billbill

    Best ROOM mic recommendations please

    Ok here’s the deal, I have two cabs L+R and sent stereo from AxeFx. I only have 1 SM57 mic but I want to capture the rig sound as I hear it in the room. I recorded some samples about 10ft away at loud volume with my iPhone and was blown away by how good the rig tone translated…so I’m now...
  91. Billbill

    Can anyone name it? One of my fav presets! WARNING//HEAVY//

    https://www.dropbox.com/s/vqvxl82t99qjvvv/Song.m4a?dl=0
  92. Billbill

    Axe FX II with real cabs - cab sim off -> gain structure is completely different

    I think using the stock IRs in about 90% of my presets through two “real” cabs sounds and feels better to me and this is both in my large jam space or playing out with the fellas. Not sure why but I like it lol. Just do whatever makes you feel it! \m/
  93. Billbill

    Diamond eyes (Deftones)

    Yeah agreed, so I think you already answered your own question. Moving on…. Lol
  94. Billbill

    Diamond eyes (Deftones)

    Huh?
  95. Billbill

    How to tame the synth block- what am I missing?

    Hi all, I haven’t played with the synth block much and decided to copy it from a violin patch I grabbed from axechng. I added it to an existing preset that’s pretty basic and attached a controller with exp pedal to blend in the synth effect (in parallel) to add a little texture to some lead...
  96. Billbill

    Marooned Pink Floyd - with preset

    Wow! I literally almost came lol
  97. Billbill

    My take on David Gilmour’s Time solo tone AxeFxII

    I thought it sounded ok lmao!!
  98. Billbill

    Stereo Phase Correction in the Axe?

    I had the same issue with sides being slightly un leveled in my Matrix. I just comped for it as mentioned above. Put tape on it and marked each side
  99. Billbill

    Pitch block whammy Need axe-pro advice!

    Ok thanks everyone I’ll learn about calibration of the exp pedal. I appreciate the help fellas \m/
  100. Billbill

    Pitch block whammy Need axe-pro advice!

    Ok I will check into that. My issue is on the toe up position whereas the whammy/octave are not present. it’s causing a slight drop in tuning
Back
Top Bottom