Search results for query: "lead boost"

  • Order by date
  1. unix-guy

    Amp channel switching & effect on/off with AxFx 3 via midi?

    See my previous post for one option (scenes and Scene Midi block)... Look into Control Switch Midi. You can use a Control Switch to both engage/bypass the Filter block and also send midi.
  2. R

    Amp channel switching & effect on/off with AxFx 3 via midi?

    I'am presently running my Mesa MRK V-35. I would like to do away with the amp footswitch to get more pedalboard real astate... lol. I'm going to use either the EM midi switcher or the Voodoo control switch to convert the amp. I know the Ax will switch the amp channels because I have set up my...
  3. T

    Ownhammer M75 GNR - My number 1 IR ! With Sounds ;)

    HI, where do you do the low & hi cut? . . . the amp, or the cab or ? Thx
  4. M

    Loss of high end when turning guitar volume down

    Yeah....the reason this happens is that the volume knob changes both the output impedance of the guitar and the resonant peak of the tone circuit. Personally, I like it and use it "backwards" as an effect. Most of the "high end loss" on the volume control happens between 10 and "about 9"...
  5. LiquidGuitar

    FM3 Death Metal, pt. 2

    Also on: Spotify
  6. pneil2

    How do you navigate presets?

    I started using Setlist/song mode a couple months ago. It really helped clean up my performances and cuts down on tap dancing…. I moved a bunch of presets I don’t use up to the higher Emory locations. I built a set of generic presets with tones I needed sorted by amp type. For songs that...
  7. cingram

    Gift of Tone 2023 FINAL - Neal Schon!

    I was curious how his solo boosts were being handled live as well. He does use pedals along with the Fractal so hopefully @Cooper Carter can tell us.
  8. G

    Gift of Tone 2023 FINAL - Neal Schon!

    This preset is amazing, and very insightful on how Neal uses his FM9. Thanks to Neal, Cooper and the entire Fractal team! One question: It seems one constant in Neal’s rig for decades and still today appears to be a Boss CS-3 compressor sustainer. I was curious as to why this was left out of...
  9. R

    LEAD VOLUME LEVELS

    Where do you get the volume knob you from?
  10. Mutha Goose

    LEAD VOLUME LEVELS

    I use a filter block with the high end rolled off. See that little knob above the Mission expression pedal? That is plugged into the FC-12 and is tied to the gain of the filter block with the range set from -2db to +8dB (IIRC). This is all set up with a re-use block. This allows me to adjust the...
  11. musicdev20

    LEAD VOLUME LEVELS

    Nope, no scene controller or control switch.
  12. Habuman

    LEAD VOLUME LEVELS

    Interesting that the other guitar player is louder. I put my Filter block before the delay and reverb (end-of-chain). Are using a scene for Lead Boost or Control Switch? If scene, maybe you have something included in the scene that turns on that is causing volume decrease? Has any scene level...
  13. C

    LEAD VOLUME LEVELS

    the amp level isn't important. it could be any setting depending on gain and other settings in the amp. 3 - 5 dB is what most use. a bit of low and high end reduction can help too. the amount totally depends on what you're boosting over.
  14. R

    LEAD VOLUME LEVELS

    Question guys, I use a "Filter Block" for a lead boost... I have my amp level @ -9.0... what level do you guys on average run your boost levels at. Right now I have the filter block set to "Null" and level set to 5.0...
  15. JasonB5232

    Who else never really uses the drive block(s)?

    It wasn't until very recently that I started to not use them. My mentality was understandably pedal board focused. My biggest problem with my pedal board was level issues between drives and that carried over to the Axe. It took me a good year before I appreciated the flexibility I had with...
  16. dpeterson

    Pretty interesting issue with a sound person.

    Quick backstory, we have a 2 band show, same drums guitar and bass equipment, different players in some spots. We run our own IEMs, splitter snake all that jazz. Had a strange issue with sound this weekend, first night no issues, second night (different venue) the soundman said my guitar...
  17. Anand Mahangoe

    Ownhammer M75 GNR - My number 1 IR ! With Sounds ;)

    Hey Gentz, For those who are struggling with IRs and stuff….. I have bought many many many IRs over the years from most of the well known companies and have also tested the Dyna Cabs….I keep coming back to this amazing pack from Ownhammer !! Live I play Inears and FOH just sets the eq straight...
  18. LiquidGuitar

    FM3 Death Metal

  19. M

    Elevated Jam Tracks - YouTube

    oops - the filterblock is usually just part of a lead boost for me. Shapes the sound a little better for how my guitar works with the preset and boosts it a few dB depending on the situation.
  20. Tomer

    Post Your Axe-Fx III Rigs Here!

    Where did ya get that I/O 1U ? Thanks! 😃
  21. Joe Bfstplk

    Preferred Method Clean to Distorted

    I use a number of different approaches, depending on the desired result. Some presets have two amp blocks and use a pair of VolPans running in opposite directions on the same Continuous Control pedal to switch which gets signal at the input - a trick that Cooper Carter shared a while back...
  22. Joe Bfstplk

    Finally Booted Up FM9....

    If the dry, in-your-face "mic'ed speaker" sound is troublesome, here's what I do to add some subtle "amp in the room" ambience: A reverb block with a short-ish decay, and the early and late levels dialed in to be mostly early reflections and mic-bleed levels of late/wash reverb: The magic...
  23. tysonlt

    Send Midi Commands from External Device to modify a preset?

    The manual on p57 calls them 'proxies' which is a good description. That controller is always receiving the MIDI, but it only does anything once you assign that as a modifier source in a block. You can also say you only want it to control the value on a particular channel as well. So in the Axe...
  24. RockYoWorld

    FC-12 and Bad Power

    Hey guys. I had an issue at my gig this last Saturday that I never had before. I have an Axe FX III Mk 2 and an FC-12 (the older style). PROBLEM After plugging in the FC-12 with the XLR cable, it would operate as usual for the first few button presses, but then start acting funny. My bottom...
  25. dpeterson

    I wonder if this can be done. 2 separate input chains share same pedal 1 expression....

    I have a friend who is running 3 instruments through a preset. input 1, 2, and 3, and output respectively. 1 and 2 are guitar 3 is bass. Guitar 1 has a pedal hooked up to a wah block with auto engage. I programmed scenes to switch lead boosts and delay etc. Having one pedal hooked up...
  26. R

    Is there an automatic gap when setting a CS to a scene, because that's what I'm finding.

    Amp and cab channels are the same on scenes 1 and 2, and I use the Klon to get a little overdrive on scene 1. I toggle footswitch 1 to change these scenes. No gap. I set up CS3 on switch 3 to give me the lead and volume boost (changes amp tone controls, gain, drive pedals, geq volume boost, etc)...
  27. grandinq

    What do you think of the Klon?

    Love it. It’s my default drive now, often with a drive setting of less than 1. I use it on the Band Commander a lot as well as a lead boost.
  28. Mutha Goose

    AFIII Dave Murray/Iron Maiden Flight Of The Icarus with preset

    I will be filling in for an Iron Maiden cover band this weekend, playing the Dave Murray parts. He was probably one of my biggest influences growing up. I wanted to try to build a preset using the same signal chain he uses. Every step of his chain is the complete opposite of how I create tones...
  29. J

    General Effects Question

    Interesting. I will take a look at this over the weekend for sure and report back
  30. Greg Ferguson

    Question about preset leveling

    You do you. If you send to FOH just tell them your lead boost is +3 dB so they don’t drop you 6 dB and keep you there.
  31. SJB

    General Effects Question

    So here's what I came up with...And you're getting great suggestions above - many of which I used in the modified preset below. First thing - you started with a factory preset that is meant to demonstrate several different versions of an amp. I don't know how you are using it... but if you...
  32. TheloniusJ

    XiTone or EV PXM (I know, another FRFR post)

    Reflections after first application as a loud backline in a live rehearsal. Set-Up: I used both PXMs behind me in standard wedge orientation. This band is a hard rock/popular metal (80s/90s). The drummer is really loud, there are two guitar players and a keyboard player. We run to a...
  33. D

    Going to create my first gigging preset and not quite sure which way is most efficient

    Also, Would utilizing the channels for drives and amp modelers be more efficient? What about foot switch functions? I'm thinking maybe having one button per drive, and having a secondary footswitch function to engage a lead boost for that drive I have selected. This would save real estate on...
  34. D

    Going to create my first gigging preset and not quite sure which way is most efficient

    Hey everyone, first time poster here. Sorry for the long post! I received my FM9 Turbo back in October. Amazing unit. I've been using it exclusively at church with the free AC30 Worship Tutorial preset. Just a few leveling tweaks and that WT preset has everything I need for church. Amazing. My...
  35. Joe Bfstplk

    Wish Expression pedal percentage view on screen

    Well, if/when the OP returns to this thread, there's info here to start trying things out.... Jumping to a lead boost and back can be done with a VolPan's output in a block placed after the amp/cab, bumping it from -4.5dB to 0db (or whatever lower volume works in context for rhythm stuff). A...
  36. elvis

    My Favorite Marshall (as of FW 4) What's yours?

    Overall the presets are nice! I like how you use the Filter block for lead boost and mid-focus. I also notice that you have a bandpass in the cab block - I do this almost exactly the same. Not my taste for tone - I find them a bit wooly, where I tend to use these amps for more mid-focus so that...
  37. D

    Is there a way to increase the amp gain without changing scenes?

    +1 For amp boost assigned to a control switch. This is my go to for seamlessly increasing gain - so much so I have it in almost every preset with the same footswitch assigned to it. In some presets I have the bypass of a delay with a level boost attached to the same control switch for an instant...
  38. Greg Ferguson

    Help me think through a preset design?

    I treat most of my amp blocks in my own presets as if they're single-channel amps and control the volume and gain from the guitar's volume control. As I roll it back the amp naturally cleans up, and as I increase the volume it'll smoothly transition from clean through the edge of breakup, to...
  39. Deadpool_25

    What could I use a single expression jack for?

    I haven't yet seen anyone using a single external switch with an LED at all, let alone making that work seamlessly (not saying no one has figured it out; I just haven't seen it). I feel like the best (only?) way to make this work would be via MIDI. For functions like the lead boost you...
  40. bleujazz3

    What could I use a single expression jack for?

    @SJB, There are aftermarket parts online that offer LED switching, though they require a power source from either a battery or a 9VDC source. I don't know exactly what switch that is, perhaps someone with greater expertise might chime in... Just did some research with "footswitch powered LED"...
  41. unix-guy

    What could I use a single expression jack for?

    There's no way for the jack to power a switch. Further, switches with LEDs tend to get "out of sync" if you change presets because the switch doesn't know the state of what it's controlling has changed.
  42. SJB

    What could I use a single expression jack for?

    Hi All - I have a question that seems to fit this thread well - I want to do exactly this - add an external switch to act as a lead boost and free up an FM-9 switch for other purposes. The issue is that I really want one with an LED so I can tell with a glance if the boost is on or off. Two...
  43. Will Chen

    FM3 vs FM9 help me decide (long winded)

    Personally, I think a huge advantage of using digital effects is reduction of the tap dancing needed to engage tones. Unless you have really complex switching in a song (like needing 6+ distinct tones) the FM3 is likely flexible enough to meet most gigging needs without any additional switches...
  44. Johan Allard

    Wish Global button for Manual 1-5

    In the Reverb and Delay Mix, there's a Global button/checkbox to make these functions global. I wish the same existed for Manual 1-5. Or alternatively, if there was a Global 1-5 (or even 1-2) that would have the exact same functionality as Manual 1-5 but set globally. My primary use case would...
  45. J

    Preferred volume/lead boost

    Are there other benefits to this strategy vs using a volume block and expression pedal? Personally, I like using a volume pedal because I can set a maximum volume gain and then can always go halfway for just a little volume boost. I eventually want to get a 3rd pedal so I can do volume, wah and...
  46. Greg Ferguson

    Preferred volume/lead boost

    https://forum.fractalaudio.com/search/1225869/?q="volume+boost"&o=date https://forum.fractalaudio.com/search/1225867/?q="lead+boost"&o=date
  47. Raggashaggas

    Preferred volume/lead boost

    Sorry, I did check and I didn’t find exactly what I was looking for. excellent. Is there a specific way of dialing in that filter block?
  48. OrganicZed

    Preferred volume/lead boost

    There are a lot of ways to implement a lead boost. My preferred method is to boost the level with a filter block placed between the cab block and the post cabinet effects. This allows the boosted signal trails to stay at the boosted level even when quickly switching to another non-boosted scene...
  49. Raggashaggas

    Preferred volume/lead boost

    Hey all, new FM9 user here. I wanted to get opinions on the best or preferred method of boosting your signal and scenes for guitar leads and how to best program them into the chain. Thanks I’m advance!
  50. greiswig

    Lead boost - anyone use a drive for this?

    Interesting topic. For a long time, I've basically used Drives in front of an amp, but "wrong." And I suspect I'm not getting out of them what I could if I could figure out a better way to do it. I have Filter 1 set up to be my Global overall volume boost, so across all presets that use it, I...
  51. tysonlt

    Lead boost - anyone use a drive for this?

    I haven't used my lead scene in a while. Depending whether I'm on clean, crunch, or heavy, it just sounds too different to whatever song we're playing. Lately I've been using a control switch to turn input boost on and enable a +3dB null filter block (with that 'plus' getting more plussed as the...
  52. unix-guy

    Smooth ODS Clipping

    Curious - why is the Wah in parallel?
  53. bleujazz3

    Smooth ODS Clipping

    Thanks very much for this. I've not tried your rig yet, because my preference is to keep it to 4 scenes. I'll check the screenshot images in a second to glean something of value. Thanks again.
  54. Lolo-G

    Smooth ODS Clipping

    Hello, I also use a config based on the ODS amp which looks like your config. I currently use it to play in a modern jazz ensemble. Here is the quick description: scene 1: rhythmic clean, ODS100 Clean, PEQ1 is active; it simulates a single coil pickup scene 2: lead clean, clean ODS100 a little...
  55. Riccardo Ros

    RR JP2C - Yep... another Petrucci inspired preset!

    Hi all! I just created a simple JP2C preset and for the sake of sharing... here we are! Some parts are created following the hints from the video series MESA/Boogie JP-2C – John Petrucci Ch. 1/2/3 (available on YouTube) but then adjusted to taste. As I stated it's a really simple preset that...
  56. X

    New Turbo - Can't load OFMG9

    I only really use 1 preset so I use the default scenes layout, I have 7 scenes selectable which covers my needs. I have one switch assigned to my lead boost, with tuner on the long press, and then the last switch toggles scene view and FX view with long press taking me to preset mode. I don't...
  57. sick pickle

    Input Boost - No increase in volume?

    On a preset, I have the input boost set to Control Switch 1. Scene 1 is a basic crunch. Scene 2 is a lead, where I am using that CS to engage the input boost. It is set as neutral. I am wildly turning the input boost level up to max and there is no discernable volume increase. That seems...
  58. TheloniusJ

    First show with the FM3

    The filter approach is awesome. I actually do both on my metal/hard rock rig. I turn on an 808 drive AND boost by 3db with a filter (I actually have the filter with a little bit of peaking at 1kHz to give it a bit more cut also).
  59. S

    First show with the FM3

    I used to use a drive block for solos until I discovered the Filter block. Using a null filter set to 2.0 db is a great lead boost for volume but not adding additional gain.
  60. Will Chen

    Help, translating my current rig to the FM3

    First up, a little unclear, are you trying to just replace your pedalboard with the FM3 or your full rig? I'll presume the later barring clarification. So...you shouldn't have any issue loading everything into 1 preset but if you want switching to function exactly as they currently do, you will...
  61. C

    How can I stop the Layout from changing ?

    wow! i’ve never ever had this happen, and for it occur that often for you is strange and puzzling! if there’s anyway you can export all Layouts and upload it here, we can look into anything causing it, or at least try to recreate it in testing. very peculiar that it always went to the same...
  62. A

    How can I stop the Layout from changing ?

    Happened 3 times at tonight's gig. Not always after hitting the same footswitch. First time was bottom right (my lead boost switch). Second time was 3rd switch on bottom row (my "Mas Bueno" dirt switch). Don't remember what triggered the 3rd one. It is always the Effects layout that is...
  63. OrganicZed

    Pros? Gain db?

    I agree with @Rex. With a nice rhythm crunch tone you should have a large dynamic range available with adjustments of your attack and guitar volume knob. I use 2.5 dB for my lead boost. +6 dB is four times louder and that might be too much. The best way is to dial in your levels at gig volume...
  64. Rex

    Pros? Gain db?

    For the most part, you can forget about formulas. Set your levels to where they sit well in the mix, in the part of the song you're playing. Some thoughts: - You can't directly compare clean and gained-up sounds. If they both read the same on the meter, the gainier tone will always sound...
  65. Will Chen

    Signal chain question.

    I would assign a controller to the output block level.
  66. S

    Signal chain question.

    What kind of block would you recommend for the lead boost?
  67. S

    Signal chain question.

    Interesting, never thought about that, and I don't see why it wouldn't work. Thanks for the heads up. I'll give this a shot.
  68. Will Chen

    Signal chain question.

    It's a 2 channel amp correct? Use the masters for rhythm and clean levels and use the FM 3 for the lead boost. Using compression here to try and significantly change volume is also going to raise the noise floor a bunch and significantly change the feel and sound of your signal.
  69. aflynt

    Switch Jack Questions

    Do you have “Control Switch Link” set to “Exclusive” for any of your Control Switches in the Global Footswitch settings? -Aaron
  70. alvarez1900

    Switch Jack Questions

    I have switch 1 set to bypass and enable a drive pedal for a lead boost. I have switch 2 set to enable fat switch in the amp.
  71. J

    Drive blocks for dirt? Amp block? Both?

    I guess but it also allows you try different flavors of distortion with clean or edge of breakup amp tone. Like i normally wouldnt use a distortion pedal with a hot marshall; i would use an overdrive just to push it a bit
  72. Piing

    DIY Axe-Fx Foot Controller for $50 (Open Project)

    I built one with a Nextion TFT 4,3" touch display The code is here
  73. jordanyte

    DIY Axe-Fx Foot Controller for $50 (Open Project)

    Anyone here yet tried sending bitmaps to all the displays over SPI instead of just colored text? I'd like to build this but be able to setup layouts where I can see the effect icon that matches Axe-Edit's tiles, on the TFT above its associated footswitch. I'd also like to use RGB LED rings for...
  74. DougB415

    OMG9 Question

    Hi, You can make these changes by using FM3 Edit, clicking on "FC Edit" and changing the Effects layout to be the way you want it. But I have a question - you say that you are using an FC-6, but it shows 10 effects. Are 4 of the effects on a Hold function, or do you have a 2nd Effects page? I...
  75. GGGuitarist

    OMG9 Question

    New to the group. I have the FM3 / FC6 with the OMG9 layout. In my preset, I have the following signal chain: Wah, Rotary, Drive, Amp, Cab, Chorus, Delay, Reverb, GEQ. When I select "Effects" button on the FM3 the following effects are visible on the FC6: Reverb, Delay, Drive, Phaser (not in...
  76. nic72

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    I'm experiencing this also
  77. B

    Axe-Fx III Firmware Version 20.00 Public Beta (Beta 4)

    Weird bug. On all my presets I have a switch on my FC-12 set to turn on and off a Filter block for a lead boost. Now with this firmware that same FC-12 switch on all presets is set to turn on and off the AMP 1 block. Edit: A couple of other FC assignments in some presets screwed up also.
  78. S

    Firmware Upgrades and CPU Creep

    I totally agree. The saturation works great, especially with P90’s. I set mine about like you do. Gives the amp some sizzle and it feels good. I use the neutral amp boost, or the saturation, or the one drive I have in every preset. The drive is usually the FET boost with germanium, or the micro...
  79. Stratoblaster

    Firmware Upgrades and CPU Creep

    You may find that the "Saturation/Saturation Drive" very effective for a lead/saturation boost allowing you to drop a Drive block to free up some CPU. I really love the Saturation/Saturation Drive and prefer it over Drives in most cases. I find it to be very transparent and doesn't change the...
  80. Will Chen

    Cooper Carter was 100% right!

    If we're talking about a true post distortion clean boost 1. Volume block has a "Level" control or... 2. Since we're talking about relative volume, you could set your controller to switch between 7 (rhythm) and 10 (lead). "Boost" is relative...
  81. K

    "All In One" Live Rock Preset

    Hi Everyone, There was a post someone made about looking for an All In One preset for live shows with scenes setup for Clean, Crunch, Lead and some others with FX and boosts. I responded how to build a preset like that, but had never actually made my own. So here it is. This was made with a...
  82. Tom Morris

    New to Fractal & Song Workflow

    You are on the correct path with scene 1 channel A scene 2 channel B. The scene controller is also handy as you can switch scenes but not the amp channel and change settings on the amp like boost volume lower bass add mid for a simple lead boost. You could even use one amp model for clean rhythm...
  83. M

    What's the "one thing" I should try?

    Yeah....that's kind of what I do. I'm very much more into classic sounds than modern ones. At least right now, I'm preferring just the natural preamp boost that comes on along with post-amp filter for shaping + level for a lead boost. But, that's generally what I like in separate gear too...
  84. Paulzx

    Practical questions Helix to FM3

    That is a good method, thexway you describe to progress through a series of scenes in correct order for the song you're playing. I can see how that would work. The main difference for me is that I rarely make presets for particular songs, my presets are geared towards certain types of amps...
  85. Will Chen

    Practical questions Helix to FM3

    If the 3 switches for the Fm3 won't work for you, at least you tried the most flexible 3 button system there is. In the default scene layout the 3 buttons correspond to scene 1-3 of your preset. To access 4-6 to long press the right switch and then the switches apply are assigned to 4-6. Long...
  86. HAhN SOLO

    So close, I can taste it.

    ...didn't like the fact that even removing shunts visibly reduced the CPU, so I knew I had to be conservative all around. Even removed my "lead boost" +3 filter block only used on lead scenes. Instead I used scene controllers to make all "lead" scenes 100% output block, and all others 96.4% to...
  87. Joe Bfstplk

    Wish Can we have a couple more VolPan instances per preset?

    The problem is that I am switching outputs, not inputs, and doing it continuously, for smoother transitions. Josie P4RIBS.syx is one. I recently tried and liked seamless amp switching via preceding VolPan blocks (instead of a mixer after), per Cooper Carter's video a couple weeks back on a...
  88. H

    How do you guys go about mapping your MFC?

    Thanks a bunch. I'll head down to the rehearsal space and try to use this a bit for guidance along with the pointers i got from Chris!
  89. paranoid

    How do you guys go about mapping your MFC?

    When I was playing with a band, I used set list feature in the mfc. I used maybe 20 or so presets that fit most songs, unless there was some unusual sound effect such as running with the devil. as far as the switches, all my presets are set up scene 1 dirty rhythm, scene 2 clean, scene 3 lead...
  90. K

    Effects question

    You can use a second channel of the delay block. Let's assume, you use channel A of the delay block. Copy channel A to channel B (or another one) of the same delay block and when assigning the CS6 to the delay block's bypass, in the Modifier Edit Window set 'Channel' to Chan A. Close the Edit...
  91. D

    Effects question

    Ok, so I had success assigning it this way and it worked, HOWEVER, since only one switch can be assigned to an effect, I can no longer just toggle the delay on/off by itself. Is that correct or am I doing something wrong. I set both the boost and delay to CS6, so now when I click my lead boost...
  92. yek

    My FM3 rig (+ presets)

    Just like my good distant pal Scott Peterson did recently, I'm posting my FM3 rig. Nothing spectacular on the floor: FM3, FC-6, Hall of Fame 2, spring-loaded expression pedal and a dual switch. I don't use a pedalboard, because I often take things apart, and I can carry everything in a Mono...
  93. Joe Bfstplk

    Options for engaging solo boosts without channels

    I use a VolPan block after the amp/cab in every preset, as I have a dedicated volume expression pedal on my board. To do lead boosts, I either use a controller to modify the output level of the VolPan from -4.5dB to 0dB, or the scene change switches its channel from one where the Output Level...
  94. TubeStack

    Suggestions for replicating Keeley Fuzz Head

    I love my Keeley Fuzz Head pedal and haven't able to replicate it with the HXFX, Helix, or FM3, so far. Granted, I haven't tried that hard and have just used the pedal in front of the modelling units, which I'm happy to keep doing as it frees up switches, etc. But for fun, as well as learning...
  95. J

    EQ Block for Solo

    Used to use the GEQ block to bump the level and mids. Now, depending on the amp, I either just bump the level in the output block for the “lead” scene or I assign a controller to the fat and boost controls. Works great and reduces CPU usage vs using GEQ. I only use the PEQ to make some low...
  96. Habuman

    Need other switching layout ideas

    Although I have an FC12, have been experimenting with just the FM3 and a Boss FS-6 switch (plan to switch out for a ME TT-2). Grab and Go. FS-6 = Amp boost and Tuner Primary / Secondary settings for Tap: Switch 1 set to Toggle = Scene 1 Low gain / Scene 4 Low gain w/FX Switch 2 set to Toggle...
  97. philipacamaniac

    How much do I need an FC-6?

    I’m in a similar situation - “cover” band, a P&W gig at a church where we play the songs exactly like the albums. One preset per song so I can dial in specific tempos and delays. When I had an AX8, I’d create scenes for every section of the song. That was pretty easy with 8 switches, although...
  98. TubeStack

    Wah bypass help

    Related question: If I have a wah block set to auto-engage with movement of an expression pedal, can I make it ”un-engagable” in a different Scene? For example, I'd like have the wah available on a Scene that's a lead boost, but not on my main crunch Scene, as to avoid accidental engagement of...
  99. TaylorU

    Lead Boost - Expression Pedal

    Dumb question here. Currently at my office right now so I don't have my FM3 in front of me and I was thinking...I use a PEQ at the end of my chain for my solo boost. I dampen the response a bit so it will "swell" into the boost. Works, but I want to transition to an expression pedal to control...
  100. C

    FM3 Firmware Version 3.02 Beta 1

    hmm, External Controller Initial Value just sets what value is sent to modifiers when no pedal is plugged in. it's not a min/max type thing, so i'm not sure this would do what you're saying, if i'm reading correctly. there may be another way to do what you want here. as for Global Reverb...
Back
Top Bottom