tuner

  1. Valgua

    Tuner arrows on main screen

    Hi! Since the last update, the two tuner arrows at the top of the main screen have changed color from green to cyan. I would like to change it back. I have done it in the "big" tuner utility but the color on the two arrows on top stays the same. Is there a way?
  2. Luke Stringwalker

    Deactivating Tuner in Scenes Layout

    When I activate the tuner via a hold switch in Scenes layout I have to press the same switch again to exit the tuner, that is, choosing another scene switches the scene but doesn’t exit the tuner. Is there a way to exit the tuner with whatever switch you press? In Presets layout it’s working.
  3. edwinstar

    Is it time to rethink the Tuner Input Settings?

    Hello! For a Theater Production i have 4 Guitars hooked to Inputs 1-4. Only one guitar has a Volume knob, the others are Acoustics with simple Piezo PUs or Contact Mics. I have to set the Tuner to listen to All Inputs to be able to tune, but when theres music playing while i tune, the other...
  4. Luke Stringwalker

    Wish Disable Mini Tuner

    I would like an option to disable the mini tuner (and maybe instead show all menu register cards).
  5. Saedelaere

    Wish Tuner - Trigger Tuner Source (Input) via MIDI CC

    I love my Axe FX and your awesome product care! That's why I'm daring to share a few ideas that some of you might also find helpful. I use an AXE FX III Mark 2 unit for two instruments (guitar & bass) and would find it helpful to be able to control the tuner's "source" (= Tuner Input) via MIDI...
  6. luckymethod

    My tuner is off and I can't figure out why

    I'm trying to figure out why the tuner on my unit simply won't work. I have selected Input 1 as the one it should listen to, and my TC electronics tuner is clearly correct (validated against multiple iPad apps including the Peterson strobe tuner) while the Axe is off by at least 40 cents if not...
  7. A

    Wish Tuner can be configured to display octave number instead of string number

    The current tuner displays the string number on the right side of the display. This is fine for most guitar stuff but it's kinda annoying when I'm plugging in my bass or trying to tune my friend's violin. Can we have a toggle that sets it to the octave number of the note instead of the string...
  8. W

    Tuner turns off. Stand in switch issue?

    I activate my tuner via a stand in switch. When active it mutes the signal for silent tuning. About 30% of the time when tuning the tuner will spontaneously deactivate and the FM3 will return to play mode. It seems like, but I am not certain, that input signal causes this. It seems to flip when...
  9. sick pickle

    Wish Tuner range

    I would love for the tuner to have a larger range - ie - down to 425 Basically, I need that Pantera tuning haha
  10. edwinstar

    No Preset Name while Tuning

    Is there a way to set the FC-12 that while the Tuner is engaged, i can still see what Preset i am in at the Moment? I assume i have to program a free button to display the current preset? Or ideally the FC-12 would show the Preset name when no string is played for tuning and switch to the tuning...
  11. fuzzydude

    Wish Tuner - frequency offset limit

    Updated wish request: I wish for a tuning range of 427Hz <-> 453Hz (±3 Hz/±10 cents beyond the current tuning limitation of 430Hz <-> 450Hz) (See this post) Edited: This other option won't work Another option that could get the Axe FX able to tune anywhere but without modifying the existing...
  12. martync

    Tuner turned off on midichange

    Hi, Im using the fm3 live and the preset changes are sent via midi from Ableton. Between songs, I use to check the tuning of my guitar, but when a midi change is received, the tuner is switched off and the preset is played. Is it possible to keep the tuner on even if a midi preset change is...
  13. D

    Outboard Tuners

    I have a Peterson strobe tuner unit that I love. I just bought an Axe-FX III and would like to configure it to be "always on" without using a tone-sucking A/B switch before the Axe-FX in the signal chain. I'm used to an older BOSS GT-Pro where there was a dedicated "TUNER OUT" jack that did...
  14. K

    Axe-Fx II Tuner problem

    Hey guys, something is wrong with the tuner of my axe fx II. When i play the E string it shows me that it's a bit more than an F. I checked with another tuner and my guitar is in tune (standard tuning). I checked the configuration page it's in 440.0 Hz and there is no offset. I don't know...
  15. G

    Ernie Ball vpjr tuner pedal.

    I am interested in the ernie ball vpjr with the tuner built in. My question is: has any one tried this with the fc12 expression out? Would the tuner function work this route? (Granted that you have the expression set up to work as needed). If not, I would have loved to see an audio fx loop...
  16. Per Boysen

    Dual inputs - tuner works on both now?

    I'm still on the Axe II and since I'm playing some instruments that send two outputs and hence requires two parallel rigs inside the axe, I'm wondering how the Axe III's tuner block handles this. An issue with the Axe II has been that only the front-side input allows the tuner to detect pitch...
  17. Conley Shepherd

    [NOT A BUG] BUG? - midi only assignment for tuner - no internal pedals allowed

    Just noticed this and it may be normal. If so, I wish it wasn't... I have a 2 button Boss FS-7 setup as pedal 1 and pedal 2 in the AF3. They show up that way in the AF3 and were recognized as such. In the midi remote/other page - I set pedal 1 as the tempo. Pedal 2 can also be set. I am...
  18. Megahertzz

    Implemented Tuner engage on exp. pedal heel down.

    I want to be able to set up an expression pedal so that the tuner engages when the pedal is in full heel down position, regardless of which parameter and block the pedal is controlling. Mainly I want this to be able to quickly access the tuner between songs when I turn down volume on the volume...
  19. Megahertzz

    Tuner engage on exp. pedal heel down

    Is there a way to set up an expression pedal so that the tuner engages when the pedal is in full heel down position, regardless of which parameter and block the pedal is controlling? I want to be able to turn on the tuner when I turn the volume of either a volume block or output block all the...
  20. P

    Implemented Toggle Tuner with single MIDI controller

    Wish GRANTED (well I shown how to toggle a high, then low value with 2 presses of a button)! Without access to foot controllers, we have to survey options. I'm using a Behringer FC1010 with the AxeFX 3 and its good. One issue is the way the Axe FX 3 turns the tuner on & off. I have to send a CC...
  21. NaturalScience

    [Not a Bug] Tuner (Sample Rate)

    So here's a weird one. I don't know if this is intended behavior or not, seems like a bug. Using fw 2.04. I have my Axe Fx III hooked up to a Presonus Studio 192 via SPDIF. I keep it hooked up this way but normally monitor through a poweramp/cab. So the Presonus is free to switch sample...
  22. Don Watters

    Wish Tuner - enable Input Source to be used with modifier

    The tuner is dependent on a given input source. My presets use multiple input sources, depending on what guitar I’m playing. I would like to be able to set the tuner input source, similar to how the multiplexer is assignable. If I could use the multiplexer as the tuner input source, so much...
  23. Megahertzz

    Wish Stage mode display. Preset/current scene in large letters and full-screen strobe tuner

    As someone who looks at the display a lot when performing live, it would be nice to have some kind of stage mode available, where you could get just the preset and scene you're on in large writing on the display, and when you turn on the tuner, you'd get a full screen strobe tuner, like the...
  24. MSS

    Wish Axe-Fx III boot right into Tuner

    Turn on Axe, last preset is loaded then tuner is displayed vs. having to select it. Pretty much the first thing I do is tune up. I’m sure others do as well.
  25. Sauro_on_guitar

    Wish Tuner on/off

    I would like to have the possibility to use the tuner in this way: press a function key to turn it on and any other button to go back to the previous point
  26. S

    Wish Tuner for bass

    I have guitars and bass!
  27. LucasLeCompte

    AFIII Axe Fx III Tuner: Overview and How to Mute

    I know this isnt an exciting video but I wanted to show everyone how to mute the tuner while tuning. I love to mute mine so that way I can use it as a pseudo killswitch while switching guitars on stage. So how do you use your tuners? Muted or non muted?
  28. J

    Wish Info+Tuner screen

    I'd love to seen a "home screen" page that showed: - Current Preset name - Current Scene (either by num or by name) - Tuner somewhere between the tiny <>'s on every page, and the full-screen tuner - Input/Output meters (can configure which ins/outs to show) - Maybe an RTA (can configure which...
  29. T

    Tuner mute all inputs and outputs.

    I'm using an RJM mastermind GT and plugging into the front of the axe fx. I'm also using the FX loop (input 2 and output 2) and the left and right sides of output 1 (one side is the wet signal of the bass and the other side is the DI) FIXED. didn't have the outputs panned correctly.
  30. S

    Low Framerate/Lag

    Hey guys, I'm new here. Loving the AX8, but at a gig last weekend, I couldn't help but notice that the feedback from the input LEDs seem to significantly delayed behind my playing. Not only that but the on screen framerate is very laggy when using the tuner and scrolling through preset banks...
  31. J

    Midi displays

    Hey! Was looking if there are any MIDI displays to make up for my ENGL Z-12 & Gecko pedalboards so that I can have a tuner and se patch names. I found these two so far: Prostage midi display and SIMI midi display Anyone know of other displays? perhaps cheaper : D haha
  32. C

    Bug? Tuner only responds to one input

    Is there any way to route two inputs to the tuner? I play chapman stick and need to tune the bass and treble sides which are plugged in to the front input and back left input. I cannot get the tuner to 'hear" the back left input any ideas? Thanks
  33. T

    Unwanted Tuner Offset while Re-amping (Word Clock issue?)

    Hello, yesterday I set up my Axe as described in the sticky thread about Re-amping with external soundcard (which is a wonderful explanation and helped a lot, worked fine so far). The thread suggests to set Word Clock to 'SPDIF/AES' in I/O menu. Today I realized, that setting this option leads...
  34. tomaesp

    Axe FX Standard / Ultra separate output signal for tuner??

    Hi guys..I'm using my AxeFx Standard, with Line 6 Xt live for midi control.. Is there possibility for separate output from Axe Fx,to send clean signal to my Line 6 XT Live input, for tuner purpose?
  35. N

    MFC101 Tuner Issue

    Hello, Managed to get great sounds and I am enjoying more and more the Axe fx 2 everyday! But I have a little problem with the mfc101 mk3 tuner : whenever I press it, it'll do it's function, but I won't have any sound coming out after I'm done tuning (to clarify I press once to tune, then...
  36. Alan Benjamin

    [NOT A BUG] tuner disabled & powers up to different preset

    Hi, I've been working on some preliminary presets for my Stick and had a very odd issue that seemed just like a tuner issue but it expanded to include the unit booting up to a different preset than selected when shut down. The tuner basically disables with the note detection stuck on "A6" and...
  37. Charles Picard

    Using external tuner (pedal) not in front of the axe fx

    Hey guys, I would like to use an external tuner (pedal), but I don’t want to plug it in front of the axe fx. I read somewhere that I could use the fx loop for this or something like that. Does anyone know how to do it or have another way to do it. thank you
  38. Burgs

    Tuner - Input 2/FXL?

    A friend has asked me write a preset that looks not unlike that found on pg.59 of the AX8 manual, where you use the FXL block as a second input. In this case he's running an acoustic and an electric and can now switch between two Scenes to engage one or the other. But I'm darned if I can get...
  39. Eduard

    Wish Tuner mode when volume pedal is in heel position

    Needed! Maybe add it as an option in the external pedal programming in the volumeblock or in the global volume settings page.
  40. A

    Wish: Tuner with spinning ball

    I wish Fractal would add the spinning ball from the Axe-Fx II to the AX8. I use the ball all the time on the II to fine tune and really miss it on the AX8.
  41. J

    tuner with In 2

    hello I saw that tuner is only for In front , and in 1 Left (rear) But , do you have an easy way to make it function on In 2?
  42. silk

    tuner issues

    I found two issues with tuner.. 1. When automatic true bypass is on, tuner can't go in "mute mode", so, before engaging it, I have to exit from true bybass (by engaging an efx block, or going to a preset without true bypass) and after tuning I have to recall the previous set. (And the "tap...
  43. R

    Another Volume Pedal Question

    I am currently using a Ground Control Pro and Mission SP-1 with my Axe Fx Ultra and it works very well. I am however looking to add a separate Ernie Ball 6166 volume pedal and TC Polytune to this setup and I am wondering how to rig it up. I have two TRS cables coming from my GCP going to my SP-1...
    • remps44
    • Thread
    • axe fx ernie ball ground control pro mission tuner ultra volume pedal
    • Replies: 3
    • Forum: Rigs and Routing
Back
Top Bottom