scene

  1. D

    Scene leveling on the unit

    Is there a way to manage the scene leveling directly on the unit similar to the way possible with FM3-Edit (as shown in at 18:20)? During rehearsals I would often like to chane the scene levels and I have no FM3-Edit there.
  2. eddysel10

    FC per Scene?

    I do have a preset with 8 scenes. I use the same amp (Deluxe Tweed) for scene 1 to 7 and add effects as needed per scene. For one specific scene - scene 8 (my main lead scene) I would like to be able to switch between more amps (4 amps). I have tried to do this by using the FC per preset and...
    • eddysel10
    • Thread
    • amp switching fc per preset scene toggle between amps using multiple amps
    • Replies: 15
    • Forum: FM9 Discussion
  3. A

    Wish Switch per Scene

    All my sounds that I need for a performance are organised in a preset. I select these via the scenes. I then use the layout of the effect selection. Now I would like to be able to switch different effects depending on the scene. Therefore, I would like to have "switches per scene" in the future...
    • aalrh
    • Thread
    • fm3 fm9 per scene switch wish wishlist
    • Replies: 26
    • Forum: FM9 Wish List
  4. S

    Scene Levels

    I use scene levels (in the output block) for leveling out all of my scenes within a preset. I have been using Axe-Edit III for this. However, sometimes while playing out, for whatever reason a particular scene may need a small tweak. I can not find how to adjust the scene levels from the front...
  5. C

    Change channel with control switch?

    Is it possible to change a block's channel with a control switch? Sometimes, I want to change the reverb block channel for all scenes. Control switches allow changes to persist when you switch between scenes. Otherwise, every time I switch scenes, I'd have to set the reverb block's channel...
  6. C

    Using fm3 with boss fs6

    Hi! I wanna know how to connect my boss fs6 footswitch with the fm3. I have a trs stereo cable pluged to pedal 1 input, but i dont know how to set it. I would like to control my scenes with that footswitch. Thanks and srry my bad english.
  7. Imyourcluster

    bring the scene controllers feature to the next level

    Hello guys, Is there any chance to see in a future update the scene controllers feature be improved? I would really enjoy being able to control all parameters I want within a preset just like helix and quad cortex, not only 4 I think that this would allow us to manage dsp power better since...
  8. J

    FM3 preset, one channel pro block with scene controllers gap while switching scenes.

    Hey guys, I need some tip. I set up pretty nice preset based on Steve Stevens preset on my FM3. I use only one channel on all of the blocks, I change few things on amp with scene controllers but when I'm changing scenes I'm experiencing a gap. Aren't the scene controllers desinged for gapless...
    • Jazzyk
    • Thread
    • fm3 gap gapless scene scene change scene controller
    • Replies: 4
    • Forum: FM3 Discussion
  9. Henry

    Closed Select different colors on Scene Toggle

    When using Scene Toggle as a switch function, be able to select two different colors based on the selected scene. (Instead of just selecting one color and the brightness changes based on selection).
  10. M

    New to Axe-Fx III - need help routing

    I'm having two major issues First we are running two guitars on input one and two. We are running both outputs left to FOH and output Right to cabs on 1 and 2. First is it possible to pan input 1 to go out of output block 1 as left and right by only using one amp block and what blocks will I...
  11. P

    Question about updates and block changes within a scene

    Hi All, Question: Will updating the firmware on the Axe FX 3 affect or change block parameters that are already programmed into scenes within a preset? The reason I ask is that I have a particular preset programmed for a particular song. I haven't used this preset for 6 months but I have...
  12. T

    Option to Auto Increment Block Channel with Scene

    Please delete this if I have failed to catch this in the manual. A lot of times when I am creating a preset I tie the block's channel number/letter to the current scene. For example on my amp block, I'll usually have scene 1 be a distorted sound, scene 2 might be a mid gain sound, and scene 3...
  13. B

    How to change tempo within a preset

    Hi there, for some tracks it would be useful to change the tempo from scene to scene. Is this possible or have I to put up presets with different tempo? Thanx
  14. gdgross

    Can I do this? (footswitch question)

    In my never-ending quest to simplify my presets and switches, I'd like to set up a footswitch in the following manner: normal function controls amp input gain via a control switch secondary function (0.5sec hold) changes the amp state from x to y and vise versa. Here's the catch - I'd like...
  15. D

    Wish AX8-Edit - Default Scene and Tempo

    In the AX8 CFG tab we had: Controllers, FS Mode, Midi, Tuner, Tempo and Default Scene. But in the AX8 edit is missing the TEMPO and DEFAULT SCENE cfg. It will be great to make all the editing from the software, even the Tempo and Default Scene. Thanks.
    • Dario Giuliano
    • Thread
    • ax 8 ax-8 ax8 ax8 edit configuration default settings edit scene tempo tempo changes
    • Replies: 2
    • Forum: AX8 Wishes + Bugs
  16. D

    Wish Unaffected blocks by scene change

    That will be great if we can have the option on every block to make it affected or not by scene change. I generally use my 1, 2, 3 and 4 footswitches as scene1, scene2, scene3 and scene4 respectively and footswitches 5, 6, 7, 8 as different standalone effects, but i really like to see in the...
  17. Shamash

    Wish Ability to toggle between 2 scenes

    I would love to be able to toggle between 2 scenes with a single button.
  18. E

    Axe FX III Into Ableton MIDI Problem [scenes]

    Hi everyone! So, today I decided I was going to dig into creating an Ableton Live set with automations for my band. I've setup my Axe III in Ableton Live 10 on Windows. I want to control scene changes via a MIDI track. The MIDI setup itself is flawless I believe, I can set a preset change...
  19. guitarfreak365

    Scene Switching Damping Parameter

    I'm not sure if this is even possible but having the ability to morph from one scene to the next with damping would be epic. I think I have heard this discussed but I believe it was before the III came out. I wasn't sure if there would be a way to do this now.
  20. P

    Implemented Block ‘Scene Ignore’ Toggle

    Just ordered my III. Can’t wait! After owning a II, AX8, and FX8, I look forward to riding the development train as they constantly improve. Even though out of the box these devices are amazing as sold and changed my guitar life... With that said, my wish for the III is for the long wanted...
  21. Henry

    Doable: Auto-Engage Modifier in one scene, Bypass in another?

    Here is my scenario: I have a Wah in Scene 1 with a Modifier on Control using Expression 1, and Auto Engage On (Med Pos). I would like Wah to be totally off in Scene 2 (so I can use Expression 1 for something else). I see in the manual that Modifiers settings are shared between Channels of a...
  22. glombi

    Wish Blocks to toggle Scenes 1/5, 2/6, 3/7, 4/8

    So far there is only one block to toggle Scenes 1/2. So at the moment I'm using an external 5 Switch MIDI-Foot-Controller to change scenes. When I push MIDI-FS1 it's LED is aktive and scene 1 is selected. When I push it again, the LED stays on but scene 5 is selected. Each push will toggle...
  23. Marco Fanton

    AX8 - scenes controller: no audio gap between clean and high gain

    In this preset I use the scenes controller to set the gain of the amp to obtain clean and High gain sound without audio gap.
  24. Moke

    Moke's 'Clean to Mean' Pack 1 - Demo Video Added!

    New product in the store..... Mokes' 'Clean to Mean' Pack #1 For firmware 8.02. 128 presets $19.99 (introductory sale price) http://www.custompresets.com/store/p129/'Clean_To_Mean'_Pack_#1_-_'Axe-Fx_II'.html I have started on this pack several times (after getting the okay from Matt), but a new...
    • Moke
    • Thread
    • 4 scenes axe fx 2 factory presets firmware moke moke custom presets scene
    • Replies: 61
    • Forum: Axe-Fx II Preset Exchange
  25. Marco Fanton

    AX8 preset with scenes - tricks to minimize audio gap

    In this preset you can find some tricks to reduce CPU load and minimize audio gap between scenes change Preset available on my webpage http://www.marcofanton.it/MFP/Fractal_AX8_Patches.html
  26. Marco Fanton

    AX8 Patch sample

    Hi guys, I like to share with you a tipical AX8 rig I use for live performances. Questions and suggestions are welcome :)
  27. S

    Presets and Scene Switching

    Good day, Question for all of you know know way more about this than I do. Using an AX8. For certain songs, I would like to be able to switch from Tone A) a heavy, distortion rhythm tone to Tone B) a clean, shimmery tone, and vice-versa. Im using different amps for my distortions and...
    • Smamoh
    • Thread
    • ax8 presets scene scenes vs presets tones
    • Replies: 7
    • Forum: AX8 Discussion
  28. spv

    Scene switching live

    I am trying to streamline the process of scene switching live, and wondering if folks have suggestions to that end. Under my current setup, I use song mode with a bank size of 5 and mostly switch presets to change sounds within songs. For some presets, I use scenes inside of songs and make...
    • spv
    • Thread
    • mfc-101 midi scene switching
    • Replies: 4
    • Forum: MFC Discussion
  29. M

    MFC 101 - Axe FX Mode - Scene Midi PC#

    Hi, I have an Axe FX 2 XL and MFC 101 Mk3. I am running the MFC in Axe FX Mode and would like to program a single preset which has buttons 1-5 change scenes as well as send a PC# Midi message to my Marshall JVM 410c. The other IA buttons I would like to assign to Axe FX functions like 'Delay...
    • malcolm86
    • Thread
    • amp channel instant access switch marshall jvm mfc midi pc# program change scene scenes
    • Replies: 0
    • Forum: MFC Discussion
  30. M

    AXE FX II and Ground Control Pro Scene/patch change help

    HELP 1. I cannot change patches (or select one of the 4 preset switches on the GCP) without losing the ability to use my two expression pedals. The green midi light won't even come on when the pedals are used/engaged. I have to select the two "EDIT" buttons, escape, and then make sure I do not...
  31. M

    Issue selecting a Preset and Scene with MIDI from Ableton/DAW

    I'm using the CC#34 Breath Controller to send a value of 0 to my Axe FX II, and it is not selecting Scene 1 like I would expect. If I change the value to 2 it will select Scene 3 for a couple seconds and then go to Scene 2. But in another section of my song I have it select Scene 2 with a...
  32. musicman0001

    Axe FX2 MkII Review Musicman0001 (and MESA amp recording)

    EDIT: My first recording and recording post: https://www.dropbox.com/s/8y7j9jnxxf7oong/metallica enter sandman-01.wav?dl=0 STACK: https://ritskes.stackstorage.com/index.php/s/VSGlDwCPmRoSOui http://forum.fractalaudio.com/threads/metallica-mkiic-enter-sandman-first-one.115791/ I LOVE THE...
  33. Luis Robles

    Scene/Block Bug??

    Today while playing live I noticed something. On this preset I have 2 scenes which utilizes the MTD block; scenes 3 & 4 . When I switch to any other scene from scene 4, the MTD block remains engaged until I select another scene. This doesn't happen when I switch from scene 3 to another scene. I...
Back
Top Bottom