Search results for query: *

  1. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    So i guess theres no way to plug a real drive into the effects return of the amp sim thus bypassing the amp sims pre ? Maybe choosing one of the marshall power amps then using a loop would be the closest it could do?
  2. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    If the loop is in front of the amp block, then that would still not bypass the amp blocks preamp though. Unless Im missing something. Just trying to figure out if it's possible to duplicate what Ola is doing with the real thing.
  3. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    Chris, Do you know what page in the manual explains this? I want to try the bdrepko method, but im afraid im sort of a Gridiot when it comes to these things. ;)
  4. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    It sounds much more clear, you take the input preamp gain out of the picture. So preamp is Pedal Drive into the power stage. It sounds killer. Ola Englund shows the difference. With a Boss Metal Zone pedal of all things. There is a big difference, so i am trying to do the same thing...
  5. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    Not sure I understand fully. I cant see how to put in a loop. there used to be an effects loop block in my old Axe II xl, but cant see one on the III
  6. P

    Distortion Pedal in Effects Loop with Axe-Fx III?

    with real amps, sometimes the distortion pedal sounds way better in the effects loop of the head instead of between the guitar and the input of the head. Is there any way to do this with a real pedal and an Axe III? I have been trying to find a way but so far no luck. Has anyone tried to do...
  7. P

    Question about using left/right routing and outputs

    Thank you Moke. Unfortunately, when i try the transfer they dont sound anything like they used to. ;( Maybe im doing something wrong, it wouldn't be the first time.
  8. P

    I was good with the II but now not so good

    when trying my patch, i still hear this high pitched ring in the background. i think that's why i used the noise gates. gotta figure out what's causing it. its more prominent in the unfixed one, but still there in the fixed version. If anyone likes my patches from the song i can upload them...
  9. P

    I was good with the II but now not so good

    Wow, my AIR settings were that high? must have been me trying to make it sound bright
  10. P

    I was good with the II but now not so good

    I have all my old Axe II presets which i would be happy to convert and share for the III. Just need to figure out how. I have downloaded the Tool.
  11. P

    Question about using left/right routing and outputs

    Here is the way I did it, similar, but it has a completely Dry path for using software plugins. BTW MOKE, Good to see you Brother, I purchased your acoustic sims for my II but now, i have the III. I can no longer use em. Do you make them for the III as well?
  12. P

    I was good with the II but now not so good

    I too am looking forward to the 12 step program. God knows I need help. Here is a song i did with my Axe II. It is all FAS MODERN for the Heavy patches and lead tones. I was testing pickups to see which set i would keep. in case you ever wondered Dimarzio Titans Vs, Seymour Duncan...
  13. P

    Instrumental: Cruse Control: Featuring Axe II and Dimarzio vs. Duncan

    Here is a jam I did trying to convince myself which pickup set i liked better. All Heavy Patches are FAS MODERN with BOSS OD1 Stomp up front and METAL 4x12 CAB (from Axe 1, converted) Intro Guitars are EMG 81 both sides and melody swells Solos in order: Dimarzio Titan Bridge Seymour Duncan...
  14. P

    I was good with the II but now not so good

    Thank you for looking at my overly bright, grainy patch. ROFL. WOW, You really did improve it quite a bit. It actually sounds like the tone i used to get on my II with the FAS MODERN amp model. I will have to open both to see what changes you made. i think its the best way for me to learn...
  15. P

    PICKUP CHOICE for CUSTOM Steinburger Mahogany body

    I ended up ordering a set of Dimarzio DeActivators. They will be in by New Years. We shall see, if they are too hot i have a MoJoe/PAF Pro set as well which is a bit cooler. I hear the Deactivators have some Insane Harmonics going on. I agree that the Dimarzios with the mismatched coils...
  16. P

    I was good with the II but now not so good

    I used to have lots of patches that i really liked on my II but since switching to the III have not had much luck nailing my favorite tones. I had a nice one for modern metal using the FAS MODERN, with the METAL 4x12, and the Super OD-1 in front, but now when i try the same settings it sounds...
  17. P

    PICKUP CHOICE for CUSTOM Steinburger Mahogany body

    I have built two killer Steinberger GL style bodies made from Mahogany. The necks are both Moses Graphite with no face dots. look sweet. I got the first one together, put a set of Seymour Duncan Holcombs from MJ. they were from the first hand wound run of 200 sets. Now I am trying to figure...
    • phantomofalfred
    • Thread
    • bkp dimarzio duncan distortion 7 mahogany metal pickups steinberger
    • Replies: 3
    • Forum: The Lounge
  18. P

    [Solved] Record Amp'd and Direct via Rows Not working

    Sorry, I have lost the use of one of my eyes and have trouble reading the manual. I put a screen in front of my computer screen to read posts. Been trying to do as much as i can with minimal reading. I am hoping to one day get some of the use of my eye back. It sucks to play sometimes...
  19. P

    [Solved] Record Amp'd and Direct via Rows Not working

    to the output 2, that i have here, where does that go to? A different output physical output than AES? I have all outputs going to AES/EBU??? Fractal should make some video tutorials on the ins and outs of this new box. it would be quite helpful.
  20. P

    [Solved] Record Amp'd and Direct via Rows Not working

    thank you. let me try it. this new Axe has almost too many choices to get any work done. A guitar player could get lost just tweaking for all eternity.
  21. P

    [Solved] Record Amp'd and Direct via Rows Not working

  22. P

    [Solved] Record Amp'd and Direct via Rows Not working

  23. P

    [Solved] Record Amp'd and Direct via Rows Not working

    are there any video tutorials by fractal that would teach me how to use the new box. The II was so much easier to dial in.
  24. P

    [Solved] Record Amp'd and Direct via Rows Not working

    it would not work for me.
  25. P

    [Solved] Record Amp'd and Direct via Rows Not working

    it is, still not working. i just get two of the exact same tracks coming out of the AES / EBU
  26. P

    [Solved] Record Amp'd and Direct via Rows Not working

    I used to have my patches set up on my Axe FX II with two rows. Row 2 would be Amp Cab route, Row 4 was just Cable going all the way across to the end. "DRY" In the output section I would pan row 2 hard left and row 4 hard right, that would send the AES/EBU to two different channels in...
  27. P

    Importing IRs Into User Banks

    I have been attempting to load cabs for hours now. but not working. I load one at a time with fractal bot but when i check the axe, all slots are EMPTY? Tried the utility as well, but cannot load any IRs into Axe III. This sucks. I just updated to new firmware and axe edit. Perhaps this is...
  28. P

    Axe-Edit III 0.07.26 Public Beta

    i just installed it and now get no sound from my Axe FX III. Going to try uninstalling axe Edit III and reinstalling to see if it works. It loads one of my patches but then says its not connected to an Axe??????
  29. P

    FracTool - for power users only

    i did install the cab from my II. Even put it in the same user slot as the II but it would not make sound. Still does not make sound. no matter what I do. Not sure why the III hates the Metal 4x12. Damn, thats my favorite cab. I tried reinstalling the patch, but it did weird things. It put...
  30. P

    FracTool - for power users only

    Wait, I think I see the problem. I think its the cab i been using. For some reason its not translating to the III. If i change the cab i get sound.
  31. P

    FracTool - for power users only

    I added the Input and Output Blocks as they did not automatically get made. I also added input 1, shunts all the way across the grid, and output 2, so i can have a reamp channel. I took the user cab i used for the patch and put it in the same numbered slot as before, still nothing. no sound...
  32. P

    FracTool - for power users only

    I think this is fantastic. I tried it with one of my favorite Axe II patches for heavy rhythm. but when i see it load, it makes no sound. Its all there, first row of blocks is the sound, second row of blocks is a row of shunts for direct/reamp to be sent to my DAW. but no matter what i do, it...
  33. P

    Best quality for Recording OUTS

    Finally got the III. This thing is going to be a bit of a learning curve for sure. Sooooo many choices now. So far, this thing sounds killer. only built one patch so far but i can see i need less stuff to make a good sound. I used to have a long chain including compressors and multiple...
  34. P

    USB driver will not install on Windows 7

    Yes working ok. There were also a few DLL files missing on my windows installation, so if you get any errors just type the name of the missing file into a youtube box and lots of people have posted short vids on how to quickly and safely install the missing ones if any. Now to figure out the...
  35. P

    USB driver will not install on Windows 7

    Ah, Its the 64 Bit Version of the OS, That's why. If this happens to anyone, see which windows 7 you are running. This one is 64, not 32 DOH!!!
  36. P

    USB driver will not install on Windows 7

    When i try to install i get this message, then when i try to install the hotfix, it says it does not pertain to my computer. What do I do. Someone help please. I am staring at a brand new Axe III and am dying to play.
  37. P

    The Definition parameter....

    sounds cool. I put my 2 up on ebay today, my III comes on Wednesday. cant wait to dig in. I saved my tones and will try to upload them to the III so i can still play while learning the new unit.
  38. P

    Axe-Fx III wait list: Let us know when you get notified...

    I got my invite 2 days ago. My AXE III will arrive in 3 days. It was only a couple of months but seemed like an eternity. I saved all my patches and fav cabs i shot and will attempt to put what i know works back into the III, then make a few brand new ones form scratch to see what the III...
  39. P

    Legacy Presets [Moke's Custom Presets] Axe-Fx II Master Thread - Updated to Q9.04/10.01 - New presets, Videos, & Discounts

    Damn, I tried to upload the two samples but it won't let me . It's too big "she said" I will try MP3 format and try to post em.
  40. P

    Legacy Presets [Moke's Custom Presets] Axe-Fx II Master Thread - Updated to Q9.04/10.01 - New presets, Videos, & Discounts

    I recorded a couple of samples of what happened. I got rid of a lot of noise by building my own patch and using your cab. I used the SUHR Badger18 amp model and most of the noise was gone.
  41. P

    Issues dialing in good metal guitar tone

    Allow me to assist as i had to spend a year with my first Axe II to get a good metal tone. #1 The amp model "in my opinion there are those that lend themselves well to metal tone. I will list them in order of best and worst. FAS MODERN "the Mesa Recto with everything annoying about the real...
  42. P

    Legacy Presets [Moke's Custom Presets] Axe-Fx II Master Thread - Updated to Q9.04/10.01 - New presets, Videos, & Discounts

    I am using quantum 9.04, I first changed the guitar cable, but did not make a difference. Then i did not use the patch, i only used the CAB in user slot 013. I used another clean patch that comes with the axe called "studio clean" I just then changed the cabinet to your one. It got me...
  43. P

    Legacy Presets [Moke's Custom Presets] Axe-Fx II Master Thread - Updated to Q9.04/10.01 - New presets, Videos, & Discounts

    I purchased both acoustic patches but both do not sound anything like an acoustic when i load the preset and load the corresponding cab into user 013 all i get is an electric clean sound with a lot of hiss and buzz. Am i doing something wrong Moke? I really need an acoustic sound for a cover...
  44. P

    Axe-Fx II XL vs HELIX

    Again, I really liked a lot of things about HELIX. The user interface is the best i have ever seen. The ease of use was great. The input/output was great. But the drives, amps and cabs just did not seem like ones i wanted to use. I did try some of my own IRs in there which made a big...
  45. P

    Axe-Fx II XL vs HELIX

    I have been an Axe user ever since it came out and gave me another direct option besides line 6. Just out of curiosity, i decided to try the HELIX and return if i did not like it. I had heard that the HELIX was much better amp modeling than the POD HD Series. Some rather popular metal bands...
  46. P

    ...

    the fact that you wrote so much to me shows that you have probs. I am allowed to list 7 players I don't particularly like. I am entitled to my opinion. boy. if all of this got under your skin why on earth would you even click on or read this post.. Again, get over yourself. I have helped a...
  47. P

    ...

    Calm down. The dude just asked for fun, for people to list 7 guitar players they dislike. Lots of people hate my playing, but who cares. It's not that serious. Get a sense of humor. maybe climb down of that high horse of yours. I took it as a fun joke, but you calling us idiots is...
  48. P

    ...

    7 Paul Stanley "boring, either sing right or play guitar right" 6 Kurt Cobain "It was the drugs talking" all songs are 3 chords and way to simple, to many repeat lyrics riffs etc. 5 Kirk Hammeet "minor pentatonic blues to death" 4 Dave Mustaine "minor pentatonic blues to death, as well as...
  49. P

    Meshuggah tonematch extravaganza!

    I have tried and failed to tonematch many times. I tried doing a match off of koloss, pulled up FAS Modern "controls to noon" 808stomp up front. TM Block, but it never comes close. What sources do you use for your matches?. Can you give me a walkthrough of your method?
  50. P

    Dry signal question "Levels?"

    I have set up a patch with two chains at once, one with my sound and the other is just a cable going all the way across the grid for the dry signal. panned hard left and right out of the AES/EBU outputs, onto 2 mono tracks in Protools. I have done this successfully however, sometimes the dry...
  51. P

    Clark Kent's TEH Dollar Sound IR's

    BTW if you guys are into high gain sounds, I used to use Das Metal with a stomp up front, recently replaced it with the Friedman, It really surprised me how heavy the friedman can sound.
  52. P

    Clark Kent's TEH Dollar Sound IR's

    Awsome IR collection Clark. Top notch as always. I am getting ready to start recording a new EP with my band and made a patch based on the Friedman amp. It uses two cabs actually, Cab 1 is your "Gift to Mankind IR" and cab 2 is a Stock Ultrares 2x12. It makes for a perfect combo. I will post...
  53. P

    I love AXE II direct, but how to amplify????

    I am playing guitar in a new band and i am in a bit of a situation in terms of how i normally do things. thanks to the Axe II i have been going direct when playing for Head Trauma, and it has given me great results. but now im playing for a second band that will be in smaller venues with...
  54. P

    My AXE FX II Tribute to Jeff Hanneman

    Thank you for the comment. I really appreciate the feedback. I was not sure if i did it good. I really tried to get that Overdriven JCM-800 vibe like they have. Lots of compression on the lead sounds. I used my Carvin Allan Holdsworth HH2 with Stock Pickups. They are PAF like, but really...
  55. P

    One of the tracks from Head Trauma's New Album "Psyco13"

    Here is one of the tracks from our latest. Axe FX II for all guitars and bass. If you like the sound I can share patches. Enjoy and comment.
  56. P

    My AXE FX II Tribute to Jeff Hanneman

    Here is my tribute to the late Jeff Hanneman: He was a huge influence on my songwriting over the years. This was one of his masterpieces. I hope Me and my Axe II did him justice. JCM800 Model / blended with Das Metal "His fav mixed with my fav" Enjoy, Comment. Remember Jeff Hanneman...
  57. P

    Two Questions regarding Axe II and Bass Guitars

    I have been playing bass since age 10 and i am now 42. on a budget. The Steinberger Spirit XT-2 or the Spirit XT-25 for a 5 string. I own two XT-25 five strings, and they are great basses. Travel friendly, sound great right out of the box. They are neck through for only $420, they never go...
  58. P

    Firmware 10 and Axe Edit beta

    CASE CLOSED: Fractal called me and we did a clean install of everything. ALL THE RECTOS ARE BACK. OOOOORRRRAAAAHHH!!! we figured something went wrong when i tried to go from 8.2 to 10.00, Uninstalling /Reinstalling all corrected the issue. (we confirmed that they were indeed missing)...
  59. P

    Firmware 10 and Axe Edit beta

    As soon as i get off work 7pm EST. i will post what's in there in order. Looks like when i upgraded to Ver 10 i didn't get all the amps. can anyone help me reset this box from scratch and uninstall/reinstall ver 10? I don't have any patches built yet so no loss for a reset. Maybe they got...
  60. P

    Firmware 10 and Axe Edit beta

    I don't have the PVH 6160 II only the FAS 6160.
  61. P

    Firmware 10 and Axe Edit beta

    I would even be happy if someone could help me get back to version 8.2 when everything worked including the editor. Then i will put my patches back and wait until this whole things stabalizes later this year. I have an album to record and really wanted to use ver 10, but maybe i cant? Still, my...
  62. P

    Firmware 10 and Axe Edit beta

    No, if i open a blank patch, try to add my amp block, Recto isn't a choice anymore. I am not talking about presets. Those were for version 8.2, and i have those backed up. Never tried to upload my patches, just tried to make some new ones from scratch. but then noticed i no longer have any...
  63. P

    Firmware 10 and Axe Edit beta

    Can i reset this box and start all over again? The last attempt to use Fractal bot, messed something up. Fractal bot tried to use my Midi Interface that is connected to my drum machine, now the midi interface is no longer responding. So there goes my DFH. Someone please help me get this AxeII...
  64. P

    Firmware 10 and Axe Edit beta

    I cycle through the entire list and back to the same amp. NO RECTOS. none whatsoever.
  65. P

    Firmware 10 and Axe Edit beta

    I uninstalled and reinstalled the beta Editor, no go. I cannot figure out how to re install ver 10. I tried to overwrite with fractalbot, but it wont do it. I cant figure out how to downgrade then upgrade again. I still cannot se any RECTO amps at all in my list, not on the axe and not in the...
  66. P

    Firmware 10 and Axe Edit beta

    Thanks for the prompt reply. I can try both of your suggestions tonight after work. I will first check the panel to see if they are still in there, "that would mean Axe Edit isnt showing them", if not, i will un install and re install Axe Edit beta. cheers,
  67. P

    Firmware 10 and Axe Edit beta

    I upgraded to Version 10, then uninstalled old axe edit, and reinstalled the new one in beta. The problem is, all my rectifier amps are gone. I cant find em anywhere, unless they have been renamed. All i see is a slew of 5150s, not that those are bad, just i love the Recto models, Are...
  68. P

    Dimarzio Evolution DP159 or Fred DP153 + Axe FX II anyone?

    If you want to upgrade a Dimarzio FRED, then do yourself a favor and get a DIMARZIO MOJO in the bridge. I absolutely love this pickup. Great for Heavy rhythms and cleans up super sweet. Think of it as a slightly hotter FRED with more mids, and reduced "icepick" highs, so its not has harsh as...
  69. P

    Recroding with USB and without using Axe II as interface in ProTools???

    I am using Protools with Motu interface. I want to record wet and dry/reamp signal at the same time over USB. Problem is, i do not want to set the Axe II as the interface because the MOTU is. Is this possible?
  70. P

    Two Questions regarding Axe II and Bass Guitars

    I purchased my first Steinberger Spirit XT-25 5 string bass and have not used any other since. Really easy to play, great tone, and only $420.00 on musicians friend. I use the Axe for both Bass and Guitar, but who says you have to use a bass amp on a bass??? I use FAS MODERN for my bass...
  71. P

    Drop Tuned Metal IR Question...

    I posted a patch here under the name "Peripheresque" ITs a high gain, tight patch. Perhaps with different amps cabs, that would get you closer. I have not received any complaints about the patch so far. Try it out.
  72. P

    Drop Tuned Metal IR Question...

    I have also been using the new OWNHAMMER BETA IRs. THey arent bad, for low tuned stuff dont use the Wide or Fat settings. Stick to the straight cabs. I would like to try out the ones posted here by a very generous German. I detune as well. for my 6 stringers, Bb Eb Ab Db F Bb for my 8...
  73. P

    Hello I'm new and I LOVE MY AXE FX 2!

    Welcome. I had that amazing experience like a kid on Christmas about 6 months ago. I must say, in the beginning i was overwhelmed on how to use everything. I was using POD HD500 which is easy to get around. All of a sudden, I had a million choices. At first i was going to send it back...
  74. P

    Peripheresque

    Im going to try it also with FAS MODERN, instead of Das Metal. See if that gets us closer to the chunk.
  75. P

    Peripheresque

    Cool. I am glad there are people helping me to get it closer. Please repost your ideas. I used a Lundgren M6 to make the patch. Now i just purchased a Dimarzio Crunch Lab, which is prob what i should have used. This is the bridge Pickup for Jake and Mark. Misha? Who knows what's in whatever...
  76. P

    Peripheresque

    Please do let me know what you think. Perhaps what it lacks. I did my best to get it close. but again, Im using Lundgren Pickups which have an upper midrange spike. The cabinets with the lower numbers may work better for you if you have a darker pickup than the Lundgren. try a 2, 3 or a 4 if...
  77. P

    Peripheresque

    follow the patch below and download the whole bundle for free. Its right here on the forum. THey all sound killer. I used a Lundgren M6 Pickup so you may have to use a brighter cab to get it to sound good. There are over 100 cabs in that download. Easy to find mine from the name. I...
  78. P

    Periphery Facepalm Mute Instrumental Cover

    I posted my patch under "peripheresque" someone with an Axe II download it , tweak it, throw it back and see who else can help us get it closer. I hope i got it in the ballpark for you guys. Cheers, Phantom.
  79. P

    Peripheresque

    Hope this is at least in the ballpark. I am still learning the Axe II. All input is welcome. I want to share so that this patch can develop into a closer model. Please be Djentle with your comments ;) Cheers, Phantom
  80. P

    Periphery Facepalm Mute Instrumental Cover

    I myself am working on an Axe II equivalent. But i do not want to just use a Tonematch Block. I want to discover the correct adjustments. I am hoping to work on it this weekend and will try to post. Then others can see my work and add their suggestions. It has to be possible on the II. Thats...
  81. P

    Periphery Facepalm Mute Instrumental Cover

    ALthough i don't have all the same settings/choices as you do on the Axe Ultra, I should be able to get close to the sound. I just don't want to use a Tone Match Block cause i want to learn more about the deep controls the Axe Offers. In order to invent my own sounds, i will need to learn what...
  82. P

    Periphery Facepalm Mute Instrumental Cover

    So without an Ultra it cannot be built? I thought Misha used an Axe II to make the sound? Well, i must admit that the sound of the Dual Rec on the Ultra always sounds better to me than the dual rec on the II. I always end up using FAS MODERN or DAS METAL rather than the Rectos on my II. I...
  83. P

    Periphery Facepalm Mute Instrumental Cover

    I am still not sounding anything like this patch when i try to build. Can you post the patch so i can see where my errors are? I am getting no sustain / distortion.
  84. P

    Wanted: Amps to Model

    I own a VHT PITBULL 100 CL which is the old type. has the switch so you can use 6L6 or EL34. On the solid state side i own a MARSHALL Valvestate B200 chorus. :-P
  85. P

    Holdsworth patches v7

    Thank you Simeon, I will try this. Should sound killer on my STEINEY :-P Did you use stock cabs or are they custom?
  86. P

    Tips for Recto tone?

    First in the chain is a Noise Gate, then Studio Compressor "Hard Knee",Try a TS 808, Put the drive to 0 and the tone to NOON. There are mid and mid sweep controls at the bottom of the page, Put the freq for mids to about 2 Oclock and the Mid to 2 Oclock. Choose Recto Orange Vintage, Put Gain to...
  87. P

    Holdsworth patches v7

    I downloaded the tones but when i load them in axe edit, they wont make any sound? Is it because i don't have the same cabinets installed as you? IS it because my Axe Software a different version? I really want to try these patches on my STEINBERGER :)
  88. P

    Favorite AXE2 IR? Bogner V30 4x12

    My favorite is a combo of two cabs for my high gain tones. Cab 1 German 4x12 Cab 2 CLAWFINGER MT-184 "MESHUGGAH"S cab. I run a compressor, gate, boost, DAS METAL, 2 Cabs GATE.
  89. P

    Periphery Facepalm Mute Instrumental Cover

    Either we have very different pickups or i am doing something terribly wrong. I tried to follow your written instructions but it sounds terrible. No balls, practically no distortion. Sounds nothing like yours. I am using Axe II with latest updates. and a Steinberger Guitar loaded with...
  90. P

    Doubling your Rhythm guitar when other guitar player plays a Solo????

    SO do i have to build a dual tone to achieve this? would the other line be an exact copy of the first? Perhaps i should post one of my patches so you guys can see my routing, and perhaps edit it to give me examples of how to pull this off.?
  91. P

    Doubling your Rhythm guitar when other guitar player plays a Solo????

    THis is a trick that MESHUGGAH have been doing since the Vetta II came out. basically you build mono patches for the two guitars, Pan Left and Right. when one of you plays a solo THat Pans Center, the other guitar player switches to a doubled patch that pans him left and right. You then throw a...
  92. P

    Tone Matching wont fly for me since i upgraded to ver 7

    nevermind, Found It ;) Back to the Salt Mines. LOL
  93. P

    Tone Matching wont fly for me since i upgraded to ver 7

    where is cliff's template on Axe Change? i cannot find it.
  94. P

    Tone Matching wont fly for me since i upgraded to ver 7

    I got it to capture, it sounds close to the original, minus a lot of gain. Now the probem is, when i try to recall it i get an error that says "Wrong asset type for current model config" ??????? I need help.
  95. P

    Tone Matching wont fly for me since i upgraded to ver 7

    no. but to be honest this is my first try using the tone match feature. I could be doing a few things wrong. I watched the video with they guy from "Solo a week" but he is using ver 6. Im not sure how to go about this. I have the Axe Edit open on the laptop, but am trying to use the units...
  96. P

    Tone Matching wont fly for me since i upgraded to ver 7

    I see the capture through usb on the right, (Cant see how to adjust the level) then the local capture of me on the left, but when i hit enter, nothing happens. ami doing something wrong.?
  97. P

    Need help installing User IRs

    I will check to see if that is the problem. If i purchase IRs from OWNHAMMER, are those for the Axe II? how can i tell which is which. Im sorry for the stupid questions, but i am a novice when it comes to the Axe.
  98. P

    Need help installing User IRs

    I downloaded a zip file for the axe II containing a collection of IR's which i have placed in the default location. I cant seem to get them to audition or load into axe edit. can anyone walk me through how to put a downloaded user IR into the program / Axe-FX?
  99. P

    From (good) bedroom tone to (weak) live sound...

    FM Curve is a reality no matter how you EQ your patch. This tip i posted above is just meant to put you in the ballpark. it aint perfect. You will always have to adjust for the volume, as well as the space that you are performing in. Try building some patches at low "bedroom" levels with the...
  100. P

    FEEDBACK/NOISE Plesae help

    I am going to try this. Thank you so much for sharing. I can see it should have been more obvious to me, the pedals, compressors, etc, all have gain settings and volume settings, which must all be kept in mind. I will follow your advice and report back. What you are pointing out really does...
Back
Top Bottom