Search results for query: *

  1. S

    FM9 No sound? Had to reboot then ok…

    70%
  2. S

    FM9 No sound? Had to reboot then ok…

    Yes basically updated… but didn’t try the preset that “failed” until practice….
  3. S

    FM9 No sound? Had to reboot then ok…

    No it does not…
  4. S

    FM9 No sound? Had to reboot then ok…

    I am getting time since practice to check all the suggestions…
  5. S

    FM9 No sound? Had to reboot then ok…

    So just did the update and at practice When I switch from one preset to another No sound? Had to turn off the unit Reboot And then the sound came back??? Freak accident ? Or is it something in need to find and address?
  6. S

    What is your first “tweak” to an amp before using

    That is why I asked… I downloaded a preset that had massive changes all over… Like preamp sag off, and the master volume trim reduced… etc
  7. S

    Curious: how many use frfr or cab for “your” stage sound

    Smaller venues… I have not had it with the fractal… but before with an amp …sometimes they didn’t Mike up amps
  8. S

    Curious: how many use frfr or cab for “your” stage sound

    Curious: how many use frfr or cab for “your” stage sound I use an frfr (atomic clr)… and then also run FOH… Do you run into gigs where you Fractal is not going into the PA? I have not yet… but wanted to ask…
  9. S

    What is your first “tweak” to an amp before using

    A few of mine as of late have been… An EQ boost on EQ input page peaking@1000hz a Q of .561 and 2 db gain I have been pulling down the master volume trim…to taste… Dialing in more mids, treble, and presence higher than “I think” it should be… Hearing different pre and power tubes…
  10. S

    Looking for this tone..

    Supro or the Gibson amp?
  11. S

    Divided By 13 RSA 23 Tonematch

    Amps to look at…Staying in the 20 watt range… But you may need to change a few “deep” parameters… Brit studio 20 Ac20 Blankenship leeds Badger Other ideas maybe a vox and or Hiwatt…or take the one of the divided by 13 models… Change power amp tubes…try different preamp tubes… Mess with the...
  12. S

    Nice YouTube video…Smallbox

    Not mine…but found this… you can download the preset… I also tweaked a version of it …by changing the Tonestack to Plexi… I also took all the settings from each page… applied it to the 6CA7 and the 2203… And it felt like it really opened the amps up… I was surprised by the KT77 power tubes…
  13. S

    Good Marshall style amps; bridging the gap between vintage and modern?

    And use the variac…I have been messing with that rabbit hole…
  14. S

    Your current fav Marshallesque amps?

    I have been using the 2203 and used the settings from JD GOT of his “jmp”… And his cabs also…sounds great
  15. S

    EVH 5153 Stealth

    Anyone using this as their “Marshall’ tones… The blue channel is really thick… Curious on some basic settings
  16. S

    Cover band players: set up questions amps and effects…

    I do not…to keep the “dna” and not have jumps
  17. S

    Judas Priest 80's era.

    HISTORY The JMP was created to keep up with the increasing demand for amplifiers with the ability to produce distortion and sustain at low volume levels for studio or home use. To create these amps, we took the base of the standard model 1959 100-watt and 1987 50-watt Lead amps and added two...
  18. S

    Judas Priest 80's era.

    These settings in the video on the fractal 2203 are pretty close
  19. S

    Judas Priest 80's era.

    I would go with the 2203 use the SD in the preamp boost and a Nobel overdrive in front… Also a thought I doubt the British steel era amps were modded for gain… but in the fractal maybe use saturation and or switch the master from pre to post…
  20. S

    Judas Priest 80's era.

    https://reverb.com/item/70045160-marshall-jcm-800-head-ex-k-k-downing-judas-priest-1980s-black
  21. S

    2203 was worth the wait

    The 2203 Low cleans are great also…and keeps the DNA intact for sure…
  22. S

    Cover band players: set up questions amps and effects…

    I thanks Rosh… is it a kitchen sink…or do you use 4 different presets
  23. S

    Cover band players: set up questions amps and effects…

    Are you using one preset and scenes or each is its own preset and scenes with in it
  24. S

    2203 was worth the wait

    Let’s see how close it can get…
  25. S

    2203 was worth the wait

    Same… from clean to mean
  26. S

    2203 was worth the wait

    The 2203 is a beast of an amp…with the Nobels pedal a lot of options…(I also like the blossom boost) From AC/DC TO Green Day with a few minor tweaks…
  27. S

    Cover band players: set up questions amps and effects…

    The 2203 high and a Nobels pedal… crush!… Cover LG (AC/DC), 80s and 90s with small gain and input boost tweaks and the mids … What. A great amp… I like the 2204 but this seems a “little” better…
  28. S

    Cover band players: set up questions amps and effects…

    Cover band players: set up questions amps and effects… I am constantly changing amps…(ocd) … I am curious what your set up looks like… Today for me 1. Clean 2. Low gain and or what I call the AC/DC tone 3. Higher Gain (80’s) 4. Higher Gain dial different for 90’s For clean I switch between...
  29. S

    Looking to run 800 and AC/30 together quick question

    Thanks
  30. S

    Looking to run 800 and AC/30 together quick question

    Looking to run 800 and AC/30 together quick question Do I need to run 2 cabs or can I got into one cab (cablab Fred/marsh IR)… In doing so I would run ‘sum’…
  31. S

    Buxom boost into a Brit800

    What were the Brit settings…sound great
  32. S

    A little late to the game but holy crap the Revv is amazing !

    I actually watch Shawn Tubbs and his Revv amp on you tube … and then try the settings on the fractal…
  33. S

    Dialing in USA Rythm 1 (USA Clean)

    Not sure what sound you are going for but this may help… I think it is the same before the name change
  34. S

    Brit 800 2204 vs 2203 thoughts

    Can’t wait for it to hit the fm9
  35. S

    Cornford MK50. Suggested settings from manual

    https://www.zikinf.com/manuels/cornford-mk50h-manuel-utilisateur-en-67039.pdf Pg. 3 suggested settings…. Going to try this today
  36. S

    Brit 800 2204 vs 2203 thoughts

    Thanks
  37. S

    Brit 800 2204 vs 2203 thoughts

    FM9 user here… curious Brit 800 2204 vs 2203 thoughts I just recently started using the 2204 Brit 800… Was curious if anyone switched from the 2204 to the 2203…how is the sound difference…I would assume close…maybe more bottom?
  38. S

    FM9: FRFR in front or behind you

    I have done this… depending on the stage size
  39. S

    FM9: FRFR in front or behind you

    THANKS...USING CLR... Sounds great behind and most gigs I get a FOH monitor in front...
  40. S

    FM9: FRFR in front or behind you

    I guess the other question is ... Is there a benefit of front or back over the other... I would assume the front you may hear "better" ??? I have not had a chance to try it that way...
  41. S

    FM9: FRFR in front or behind you

    Same here
  42. S

    FM9: FRFR in front or behind you

    Do you have your FRFR in front of you or behind… I have always had it behind…but have seen a few pictures of people with it in front
  43. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I made one in cablab of the Marshall…thinking of getting the new freedman pack
  44. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I only got to borrow it for a week or so
  45. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I actually had a prototype of the ccv because Mark was fixing a modded Marshall he did for me and gave me a proto to jam on for a week…until mine was done…
  46. S

    Are most of you gigging with your FM9's?

    I keep switching around… just move to 2010 HBE and Smallbox…for Marshall tones… Tried the “suggested settings” in the Friedman manuals for Be-50 and Smallbox… sound great and not how I would think to set them Settings are in this thread...
  47. S

    Are most of you gigging with your FM9's?

    Usually gigs are 2 to 4 a month… Some smaller clubs/bars and also bigger venues and events… It is so easy to set up and I know what it will sound like regardless
  48. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    It seems to work… who knew…lol
  49. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    https://friedmanamplification.com/wp-content/uploads/2022/10/DIRTY-SHIRLEY-INSTRUCTION-MANUAL_revised-3-15-23_FINAL.pdf
  50. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I was trying to keep the settings and just dialed in the low cut… I may put low cut back down and the mess with the bass…
  51. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I actually…do a higher low cut on the like 150/200
  52. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    Steve Stevens version
  53. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    FYI: SMALLBOX For Channel 2 we recommend starting with the Bass on 8, the mids at around 6 or 7 and the treble at 5. Set the gain around 8 and then bring the master to taste. For SS100 We recommend starting the amp with the Bass on 7-8, the mids at around 6 or 7 and the treble at 5. Set the...
  54. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I know ... I took a second look on that...LOL when I read the manual...
  55. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I was just looking at the Friedman manual…and notice suggested settings are on all the amps…smallbox works great also… I was started to mess with the SS100 Steve Stevens amp…and was going to run through all the HBEs and see what might come close to the SS
  56. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    The buxom boost works great with it…. https://friedmanamplification.com/wp-content/uploads/2022/10/BE-50DELUXEINSTRUCTIONMANUALFINAL10-17-2017.pdf
  57. S

    Favorite Strumming Clean Tone (live with humbuckers)

    Double verb vibrato USA rhythm one. ( I didn’t try this until the other day because of this video)
  58. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    I know it is not what you would think… but it works
  59. S

    Friedman 2010 model with Friedman suggested settings is my new go to…

    Friedman 2010 model with suggested settings is my new go to… https://friedmanamplification.com/wp-content/uploads/2022/10/BE-50DELUXEINSTRUCTIONMANUALFINAL10-17-2017.pdf Except I have gain at 5…. Input boost 4.5 boss pedal. Sometimes I use the fas boost Bass cut 200 Speaker imped…either 800...
  60. S

    How to make lower gain Plexi pre set sound full?

    Maybe a PEQ after the amp? Flip the cut off and the fat on? Do you use a input boost… FAS boost feels “fatter” Also look at the variac…and maybe negative feedback… I also really like the Revv G G1 channel for a plexish feel…
  61. S

    Cooper Carter FM9 instructional video

    It is well worth it…
  62. S

    REVV Gen Green 1

    I also tried the Revv G1… For a clean amp tone…it works well
  63. S

    Dyna cab install only see thin white line no cabs

    Will do
  64. S

    Dyna cab install only see thin white line no cabs

    Edit…sorry
  65. S

    Dyna cab install only see thin white line no cabs

    Where the list of dyna cabs should be When you click on Cab L
  66. S

    Dyna cab install only see thin white line no cabs

    So I have an fm9 and fm3 the 3 is a back up… Installed Dyna cab today… but only see thin white line no list of cabs? Like in the fm9 Fix?
  67. S

    Fractal Audio AMP Models: Revv (based on Revv Generator 120)

    The Revv green can do a great AC/DC ( I use Back in Black songs) to dial it in… Still messing with it… gain 5 master 6…. Low bass 2 and use depth to dial in bottom… I also used the variac at 80 I think…. Also using dyna cab…lurxst…sm57 and ribbon
  68. S

    Brand new Atomic CLR

    They sound amazing for sure…. My old one is a little brighter…for sure
  69. S

    Brand new Atomic CLR

    Anyone get a brand new Atomic CLR? I just got mine… sounds a little deeper/darker than my old original…I assume it needs to break in a bit…
  70. S

    Anyone change the Tonestack on their preset?

    It is like any “preamp” back in the day used with a VHT poweramp…. Well that amp would have kt88’s so,I change the power tube section in the fractals to kt88
  71. S

    Anyone change the Tonestack on their preset?

    Just trying different stack and using my ear…if I like it or not… The slo / 800 I read on the forum…
  72. S

    Anyone change the Tonestack on their preset?

    I saw a post on changing the Tonestack.. So I I have been messing with the SLO and the JCM 800 Tonestack… a nice different flavor… I also noticed taking a SLO clean and master on 10…gain on 8…is pure AC\DC…and a little variac at 80% Is anyone else doing this? Would be interested in other...
  73. S

    Iron Maiden Dave Murray

  74. S

    Favorite ToneStack Swap (Axe III Edition)

    This sounds awesome.. best of both worlds…
  75. S

    One chorus pedal block: can I switch between two sounds

    Thanks
  76. S

    One chorus pedal block: can I switch between two sounds

    One chorus pedal block: can I switch between two sounds I hope this makes sense… I uses a scenes setup for 5 different amp tones Then go to the effects screen and set the effects on/off for that song… I have one chorus pedal… I want to have one button be for channel 1 dimension c setting and...
  77. S

    Best "Kitchen SInk" all-in-one presets to get through most gigs? Try this....

  78. S

    How long after you received your FM9 did you decide to sell your amps and cabs…

    How long after you received your FM9 did you decide to sell your amps and cabs… I keep staring t the not used cabs 2 1x12s and 1 4x12 and my amp head….and going hmmm….
  79. S

    Tom Petty / Mike Campbell preset?

    I’d go ac20 and use the griddle cake or klon for more gain… FYI Campbell uses Princetons and tweed do a rig rundown on YouTube…. The cameltoe pedal is basically either two green rhino or a green and red… so flavors of ts9s… Also the sv20 Marshall is good for it also…roll back you guitar to 7 or...
  80. S

    Cooper Carter FM9 instructional video

    I went with the FM9 well worth it
  81. S

    Cooper Carter FM9 instructional video

    Thanks
  82. S

    Cooper Carter FM9 instructional video

    Thanks.. I am sure there is new info for sure…just curious what?
  83. S

    Cooper Carter FM9 instructional video

    So I bought the FM3 class… Just got the FM9… is there enough “new” content to justify buying the FM9? Or will there be alot of “same” info
  84. S

    How to set FM9 to always load preset 0 on start up

    It does …I was just curious if there was a way to set it
  85. S

    How to set FM9 to always load preset 0 on start up

    I am sure I missed it in the manual… How to set FM9 to always load preset 0 on start up? Is it possible?
  86. S

    My Favorite Marshall (as of FW 4) What's yours?

    Just got the FM9 and was “redoing” my presets… came across the Brit 20… it “nails” ac/dc…. It cleans up great also for cleaner sounds.. may bump my “vox” amp out of the clean spot
  87. S

    Waitlist Email

    Received FM9 today…waitlist 1/17/21
  88. S

    Amp block for Friedman BE models

    Yes
  89. S

    Amp block for Friedman BE models

    A legacy cab 4x12 fractal GB m160 Low cut 96. And high cut 13000 (or whatever you prefer) may be a good start… Then add a 57 mic cab for flavor
  90. S

    Have you found “your” amp in the FM3?

    you could start here.. TD 7 ND 2.5 MV 7 Input Boost on, Fat and Bright on, I added depth 4, Sat 4, Variac 75%, MV Location Post phase
  91. S

    Have you found “your” amp in the FM3?

    My Main amp for clean right now is the Morgan AC20 (in another band I use the Mesa MkIV clean ) My main gain amp is the 1959 Jumped Marshall... The original specs started with the Austin Buddy...Then I have basically "Jose'd" it... Saturation, Variac, Post phase... I have switch tubes between...
  92. S

    Need my Kemper sound on Fractal. Will pay $$

    Same here
  93. S

    FM3 vs AXE-Fx3 on stage

    I came from kemper and use a fm3… a few things… do you use a lot of effects within one preset? that will be the biggest question…
  94. S

    How to recreate the famous Dookie modded Marshall amp?

    I used this link and watch a Pete thorn video on Jose modded Marshall to create my “fractal Jose” Post phase inv, variac, preamp boost for tone shaping…etc…I didn’t do the “2 amp idea”…didn’t need it…used the boost and also a “klon” od from the drive1 in front
  95. S

    *newbie question. FM3 live use.

    If you just want plug and play…your options are factory…or someone like Austin Buddy and others who have dialed in tones and tweak them for live use….
  96. S

    Tired of band discussions about my git sound

    Just curious…are they unhappy with the “stage” sound or the FOH sound, or both?
  97. S

    Can't nail AC/DC tone - help is appreciate

    also besides above… mess around with the master volume make a post phase…. Also of course the cab block is a huge part… Not sure how many cabs you are using but that can also be a rabbit hole… one cab with a57 and one with a 121 maybe…
  98. S

    Interested: FRFR in front of you or behind like traditional

    I have the atomic clr… so I can go wedge or side like a cab
  99. S

    Interested: FRFR in front of you or behind like traditional

    Interested: FRFR in front of you or behind like traditional… I guess also on the side which I have done… So far it is usually traditional for me…
  100. S

    FM3 gigbag or case?

    Sorry have not been on for a few…I can see what I can do….I think there was a few pictures in a fractal Facebook group…
Back
Top Bottom