Search results for query: *

  1. TravisG406

    Give me some new bands or players to listen to.....

    Darrell Scott
  2. TravisG406

    Tremonti

    Uberschall and change to 6L6 for dirt
  3. TravisG406

    Pickguards are the most important factor in electric guitar tone!

    I’m constantly swapping the guard on my Squire Strat to try to get that coveted 59 LP tone. I’ve been getting close with a cardboard sandpaper alloy but reading this it looks like I’m gonna have to bite the bullet and empty my wallet on a vintage guard
  4. TravisG406

    New DynaCab™ Pack - York Audio 4x12 Recto

    If you did Paypal it takes the Fractal system a little while to recognize payment was received.
  5. TravisG406

    New DynaCab™ Pack - York Audio 4x12 Recto

    Payment method effects the speed you receive it if I recall correctly
  6. TravisG406

    Knob Riders: OD/Amp or Amp Alone for better cleanup?

    2011 American Deluxe Strat - Throaty Bucker convertible neck, underwound middle (can't remember which) and Juicy Bucker convertible bridge 2023 American Professional II Strat - TruGauge hybrid set 2020 American Performer Telecaster convertibles PRS McCarty 594 TriBuckers The treble bleed messed...
  7. TravisG406

    Dad Jokes

    Memorized this one when I saw it in my dad's office growing up: When it's springtime in Montana And the gentle breezes blow About 70 miles an hour And it's 52 below You know you're in Montana Cause the snow's up to your butt And you breathe a breath of fresh spring air And both nostrils freeze...
  8. TravisG406

    Knob Riders: OD/Amp or Amp Alone for better cleanup?

    My favorite is the 1987x because when I roll back volume it doesn't sound thin. I'm running mostly Zexcoil pickups with treble bleeds, I love the cleanup I get.
  9. TravisG406

    Upgrading studio monitors in a tight space

    Slate VSX - I could never trust my mixing spaces - I feel they have helped a ton
  10. TravisG406

    RESOLVED - USB Driver virus warning? (Audio Driver Update for Axe-Fx III, FM3, and FM9)

    Firefox let me download them - Chrome and Edge blocked - but then Windows deleted the files pretty quick
  11. TravisG406

    Pimp My Guitar: Let's see your mods

    The Fender Family Oldest to Youngest - left to right: 2011 American Deluxe Strat - Callaham bridge etc, Fender locking tuners, Zexcoil push pull convertible bridge and neck. Single coil only middle. Treble bleeds. Blend neck and bridge pickups with second tone knob. 2012 Fender American Special...
  12. TravisG406

    Wait to Open a Shipping Box with a Guitar in it?

    I wait and it sucks.
  13. TravisG406

    FRFR for bass

    On talkbass I’ve seen people say Yamaha DXR15 is the best in its price range for bass
  14. TravisG406

    The importance of Mono for live guitar playing

    In my last band I had his FM3 running through my III. I set up presets with panning controls so I could pan him left and me right when we were playing the same parts, then both back to stereo when we were playing different parts. It was fun for me at least - not sure anybody in the crowd noticed.
  15. TravisG406

    Hi im back

    The ol' Irish Exit!
  16. TravisG406

    Pop up on home screen on a PC

    Start Task Manager and see if you can find anything running that looks like it might be related to this popup. It could also be coming from a browser extension possibly.
  17. TravisG406

    Best way to record guitar from axe fx and vocals from a mic at the same time?

    I did all my demos with Yek's recommended https://www.sweetwater.com/store/detail/A85F--shure-a85f-line-matching-transformer and a SM7b - works fine and you don't need another interface or preamp.
  18. TravisG406

    The Mark Knopfler Guitar Collection @ Christie's

    But it’s not for nothing…
  19. TravisG406

    FM9 Firmware Version 6.00 public beta (1)

    That's a big lift - they do update factory presets occasionally but not on a regular schedule.
  20. TravisG406

    Presets NEW! Master Thread - Austin Buddy +PLUSPACK 2024 for Axe-FX III (fw24.04) and the FM9 (fw6.00p)

    Factory 2 - 1024
  21. TravisG406

    Presets NEW! Master Thread - Austin Buddy +PLUSPACK 2024 for Axe-FX III (fw24.04) and the FM9 (fw6.00p)

    Any reason to use this one over the null IR at the end of the second factory cabs bank? Thanks!
  22. TravisG406

    Gift Of Tone... help, please!

    If you are on newer firmware now than the firmware at time of release they may sound slightly different than originally intended.
  23. TravisG406

    Anyone receive their 2023/24 CLR Neo deliveries?

    I love them, they replaced my qsc cp-8 monitors and the qsc kw153’s I was using as mains
  24. TravisG406

    Anyone receive their 2023/24 CLR Neo deliveries?

    I ordered 4 at full price then 2 at sale price before they ran out of stock last year and received them all.
  25. TravisG406

    Denoising strat - shameless request for recommendations

    +1 for Zexcoils, I have a strat with their convertibles in the bridge and neck and a strat that I put their new tru gauge ones in for a vintage underwound option.
  26. TravisG406

    FM9 Firmware Version 6.00 public beta (1)

    Ohhhhhhhh yeah!
  27. TravisG406

    Presets NEW! Master Thread - Austin Buddy +PLUSPACK 2024 for Axe-FX III (fw24.04) and the FM9 (fw6.00p)

    Loving it!
  28. TravisG406

    GIFT OF TONE 2023 #4 - Chris Baseford

    I’d love some bass presets too
  29. TravisG406

    Axe-Fx III Firmware 24.04 Release

    Thanks Cliff!
  30. TravisG406

    How do you back up your music PC?

    I use Backblaze because of the unlimited storage and it backs up any attached drives.
  31. TravisG406

    Something's coming....

    Intriguing!
  32. TravisG406

    Fender American Pro II Telecaster Deluxe Maple

    Check out the Zexcoil tribuckers, I love them!!
  33. TravisG406

    5150 Presence Knob

    "The Lady of the Crystal Lattices,... [angels sing] ...her arm clad in the purest shimmering grill cloth, held aloft the 1/4 inch jack from the bosom of the secret sauce, signifying by divine providence that I, Cliff, was to code Cygnus. [singing stops] THAT is why I'm your king!"
  34. TravisG406

    Lets see those PRS's

    Aaaand here we go! McCarty 594 Red Fire Burst
  35. TravisG406

    Lets see those PRS's

    Doing the 24 hour Sweetwater thing… my first core. I’ve had SE’s and currently a S2 satin single cut with zexcoils installed.
  36. TravisG406

    HAPPY BIRTHDAY CLIFF!

    Happy birthday!!
  37. TravisG406

    Atomic CLR's on sale 899 https://atomicamps.com/

    Dang, I just bought four a month ago
  38. TravisG406

    Ideas for first DAW?

    About to not be free now - they’re creating a new version that will have a fee
  39. TravisG406

    Axe-Fx III Firmware 23.00 Release

    Are you stacking 3 drives or using 12 different drives?
  40. TravisG406

    Speaker Impedance Curve - I can't get it to work today

    That was it, thanks!!
  41. TravisG406

    Speaker Impedance Curve - I can't get it to work today

    No, I reset my system parameters too in hopes to fix it. Thanks
  42. TravisG406

    Speaker Impedance Curve - I can't get it to work today

    I was playing around on my FM9 and discovered the SIC settings were not making an audible difference. I then switched to my III and had the same issue while creating a new preset to test. I have auto Dyna-Cab IC turned off but am using a user IR. I choose different curves and it doesn't make a...
  43. TravisG406

    Pete Loeffler Chevelle tone?

    I want the bass tone from Wonder What's Next
  44. TravisG406

    Early reflections stereo reverb for headphones use

    Have you messed around with the FullRes IR's? There are some in the Legacy bank at the very end. Put them in the cab block slots 3 and 4. Pan one hard left and one hard right, then mix them lower than your main IR(s) in the first two slots. Depending on your CPU usage they are great to use with...
  45. TravisG406

    The Power of One Block

    Can't wait!
  46. TravisG406

    Atomic CLR's to Studio monitors

    I’d do the $899 CLR powered cabs lol
  47. TravisG406

    FM3 My Sharona

    I listened to that solo over and over when I first discovered it - on a Packers Greatest hits cd after they won the superbowl in 96
  48. TravisG406

    True single coil but noiseless help

    Check out Zexcoils, really cool design and I think they sound great - have them in most of my geetars
  49. TravisG406

    Before Cliff landed on Fractal Audio....what was he going to call it?

    Amps “R” Us
  50. TravisG406

    Bar Band Mixer / PA Suggestions

    I like my QSC Touchmix 30 for the anti feedback and the presets, it saves me a lot of time and I feel pretty confident running my band’s sound from the stage
  51. TravisG406

    FM9 Firmware Version 5.00 public beta (1)

    What if you really feel like you need to RALF?
  52. TravisG406

    FM3 @Bass

    I would still buy from austinbuddy because if you buy it from him you’ll get access to his updates as Fractal updates the firmware
  53. TravisG406

    FM3 @Bass

    I highly recommend Austinbuddy’s bass tone pack. Use it for every gig I play bass on
  54. TravisG406

    Expression knobs - who's using them?

    I use mine to set the volume boost level for my solos via the filter block.
  55. TravisG406

    What artists do you think that may still not be ready for plug-and-play the Axe-FX III?

    Jack White
  56. TravisG406

    Acoustic Guitar through the Axe FX III?

    Can you post a comparison of the recordings between your DI and Fractal? I'm doing a tone match to make mine sound like it's mic'ed and I think it sounds great, but DI should be pretty similar. What type of DI are you using?
  57. TravisG406

    What studio monitors were used for the Axe Fx 3 promo or reveal?

    Ooof https://avlsupply.com/product/mjf-210-high-power-stage-monitor/?attribute_pa_ip-rating=standard&attribute_input-control=5+Pin+XLR&attribute_pa_rms-option=rms-equipped&gclid=Cj0KCQjw7aqkBhDPARIsAKGa0oIHdVLB1W-yTWJpL6o0pfaslbkqYapFB-Jmhu-ZkXHHkFNR89alUwEaAs8YEALw_wcB
  58. TravisG406

    What studio monitors were used for the Axe Fx 3 promo or reveal?

    MJF-210
  59. TravisG406

    Routing a mic with FM3

    Be sure to set your I/O settings on Input 2 to Left only or Right only. From the Wiki: IMPORTANT: do not select SUM L+R or STEREO when using only the Left input. This may introduce noise (from the disconnected Right input) and attenuates the signal level (6 dB)
  60. TravisG406

    FM3 as primary audio device, worse for wear?

    From the Wiki: Hardware OUT knobs Finally, the OUT knobs on the hardware let you adjust the overall volume for each pair of analog outputs. The exact position of the OUT knobs is shown as a percentage in Setup : Utility : ADC Levels. OUT 1 also controls the volume level of the headphones...
  61. TravisG406

    FM3 as primary audio device, worse for wear?

    You're not going to damage it unless you put a poweramp output into an input - don't do that. Your computer could conceivably clip but it would only be nasty digital clipping and not damage the device.
  62. TravisG406

    Bass and guitar at one time?

  63. TravisG406

    GAVIN ROSSDALE (BUSH) FM9 Tone Tour

    Holy gain Batman!
  64. TravisG406

    Caption this Cartoon

    Still waiting for that QC desktop editor Carl?
  65. TravisG406

    FullRes Reverb IR's

    I like it a lot. I don't have a good room and I know my mixes are better using it. It has been great for my situation and needs
  66. TravisG406

    FullRes Reverb IR's

    Thanks! How did you capture these? I have some I'd like to capture from my VSX headphones software
  67. TravisG406

    Cakewalk sound test

    The only thing I haven't been able to get set back up is the Hollywood expansion packs for Dimension Pro that I had.
  68. TravisG406

    AFIII Stevie Nicks' "Edge of Seventeen" Cover (Live Guitar Tone)

    Nice job!
  69. TravisG406

    Coming soon...

    Oh wow, I didn't even realize this dropped! 1,676 days of bated breath - heading over to check it out
  70. TravisG406

    Cakewalk sound test

    Try e-mail - I'm pretty sure that's how I was able to get in
  71. TravisG406

    Cakewalk sound test

    Do you remember your username or e-mail used? https://www.cakewalk.com/My-Account/Lost-Password
  72. TravisG406

    Cakewalk sound test

    You can get your old vst's and instruments by downloading Cakewalk Command Center and logging in and installing them - https://www.cakewalk.com/command-center
  73. TravisG406

    Xitone Build Time

    Glad I got mine when I did - yikes! Sucks, cause I remember reading this about the one silver screw on his cabs: "As for the silver screw... it's been a trademark thing from the very beginning for XiTone. The meaning is this: If you think about it, that screw is doing the same work as every...
  74. TravisG406

    Just ordered these ASI IEM buds with built in mics......................

  75. TravisG406

    Recommendation for FRFR Bass Cab at Gig Volume

    Personally I have a GSS baby sumo and 2x12 cab
  76. TravisG406

    Recommendation for FRFR Bass Cab at Gig Volume

    On talkbass I’ve seen the Yamaha DXR15 talked up for this purpose, https://www.talkbass.com/threads/going-full-multi-effects-and-looking-for-frfr-speaker-suggestions.1504681/page-2
  77. TravisG406

    Assing two simultaneous A/B channel change to one button

    You could set a FC switch to select Channel B of the amp and then set the hold function of that switch to select Channel B of the delay, but you'd have to press quick for amp and then hold for delay and you'd need a similar switch for going back to A (also you could have the second press return...
  78. TravisG406

    Mind blowing stuff from OpenAI

    Spaghetti commercial?
  79. TravisG406

    Reamping with iOS? Phone or iPad

    Sweet, I'll try that out, thanks!
  80. TravisG406

    Reamping with iOS? Phone or iPad

    i used the patch cable, I don’t know of a way to get audio routed to 5/6 on iOS
  81. TravisG406

    Reamping with iOS? Phone or iPad

    That works great!!
  82. TravisG406

    Reamping with iOS? Phone or iPad

    I was thinking for sound check when playing bass and running sound it would be awesome to have a recorded DI clip on my phone or iPad of me playing bass to reamp when setting levels. I recorded a DI track and exported as a .WAV and transferred to my phone. I set AxeFx III input 1 to digital and...
  83. TravisG406

    Axe-Fx III Firmware 22.00 Public Beta #3 (Beta 9)

    Plot twist, the dynamic mics randomly switch places between cabs lol
  84. TravisG406

    Coming soon...

    @Axeman have you turned the unit on yet? That’s the first step 😂
  85. TravisG406

    Xitone Build Time

    Yeah, I was basing that off what I was reading in this thread: https://forum.fractalaudio.com/threads/atomic-amps-tom-king-wont-return-my-amp-its-been-a-year.96626/page-6#post-2409091 and seeing that they're in stock, and some post by Tom saying he was optimistic for this to be a good year and...
  86. TravisG406

    Xitone Build Time

    Looks like Atomic has CLR's in stock now and is trying to be more reliable
  87. TravisG406

    Build me a hypothetical PC - sway me to the dark side

    Oh yeah, I was seeing the other build recommendations and saw that they were comparable to his prices so I figured I'd add it :)
  88. TravisG406

    Axe-Fx III Firmware 22.00 Public Beta #2 (Beta 7)

    I know you love playing your amps, does the OH IR sound more amp in the room to you?
  89. TravisG406

    Build me a hypothetical PC - sway me to the dark side

    I'm using a build by Jim Roseberry at StudioCat at my work and highly recommend his builds: https://www.studiocat.com/
  90. TravisG406

    Axe-Fx III Firmware 22.00 Public Beta (Beta 6)

    Now we definitely need modifiers to control position and distance on the Dynacabs to simulate playing in an earthquake.
  91. TravisG406

    Whats Cliff doing now?

    Yesssss
  92. TravisG406

    Can't afford a Klon? Grab a Bad Monkey!

    Change the title to “Can’t afford a Bad Monkey? Grab a Klon!”
  93. TravisG406

    Within the same preset, can I copy an Amp Channel (A) to another Amp Channel (B)?

    You can also save the amp channel to your block library if you like
  94. TravisG406

    What do you guys recommend for live audio for bass?

    If I want volume I'm using a Baby Sumo (https://www.guitarsoundsystems.com/gss-baby-sumo-ampxlite-bass-guitar-power-amp-c2x21844846) into my Genz-Benz 212t. Otherwise I'll just let FOH carry the bass and I'll use a monitor
  95. TravisG406

    YT Linked Videos

    Are you signed in to Youtube? They don't like people watching videos anonymously...
  96. TravisG406

    Whats Cliff doing now?

    You sound like a good candidate for the search button! By: Member - enter FractalAudio :tearsofjoy:
  97. TravisG406

    Cakewalk issue with Axe-FX III

    If you're using AIO you may only use one interface at a time. Unselect the Focusrite and you can then select the FAS options
  98. TravisG406

    SKB Shallow Rack Fit for Axe-Fx III

    Not at all :)
  99. TravisG406

    Do the pros use tone match

    Rush was using tonematch for acoustic too.
  100. TravisG406

    Red Hot Chili Peppers / John Frusciante recreation

    This is the way.
Back
Top Bottom