modifiers

  1. Shenks

    Wish Synth Modifier Capability

    After seeing the wish list item for modifiers in the CAB block it got me thinking... how wacky and flexible would it be if the modifiers also received an update in this area? For example, you apply a modifier to Frequency parameter of the Synth block (e.g. Sawtooth or some other LFO), and then...
  2. kywabunga

    Wish MODIFIER: Pitch/Note Detector

    Humble request for a modifier that detects the actual pitch/note of an incoming signal. Ideally, it would have an option to quantize-to-the-closest-correct-note similar to the synth block, as well as a variable reference for players not using A-440.
  3. B

    Wish Full Midi Control

    Hi there, I find the midi capabilities extremely limiting and rigid. here is my point of view: I don't need all those cc values to turn on/off pedals - I am using scenes for that. I'd much rather have all those CCs customizable and assignable to modifiers. Just think 3 controls for each pedal...
  4. guspiasecki

    Issue: Modifiers in Controllers

    Did anyone have that same issue? Or knows how to solve it. When that happens I can't use any assigment no more. Things live Control Switches, other Ext Pedals, etc. Thanks.
  5. datasundae

    Advanced Volume Expression Pedal Parameters

    As I stumble down the FX-III configuration trail, with all it's mud, boulders, inclines and declines, I've arrived at the point where I want to focus on the volume expression pedal (which means I am making headway ;-). In the beginning it was just getting it to work at all. Then it was 'you mean...
  6. L

    Wish Controllers page - imposible to see parameters to change (on FM3 screen)

    The situation concerns FM3 used from the screen and buttons (not from FM3-Edit) If we want to see what controllers are used in a preset, we shoud press button C on the Main Preset screen, and then a few times Page>> until we get to the "Controllers" screen: But this "Controllers" screen we can...
  7. Entasis

    List of parameters that can have a modifier assigned to them

    Amp Bypass Level Input Drive Overdrive Bass Mid Treble High Treble Presence Depth Master Volume Input Trim Input Boost Cut Fat Bright Switch Saturation Switch Boost Level Variac Tremolo Freq Tremolo Depth Input EQ Frequency Input EQ Gain Input EQ Definition Output EQ (On/off) Output EQ All Bands...
  8. Entasis

    Regularize all the modifiers in Drive block

    Is there a reason that the Bass, Mid, Treble and Mid Frequency knobs are sometimes assignable to a modifier and other times not (bolded below)? Would it be possible to make them all assignable? BB Pre Gain Bass Treble Bender Fuzz Drive Tone Tone Bit Crusher Drive Tone...
  9. Owczar

    Switching between controlling multiple modifiers

    Hello! Sorry if this was already talked about, I couldn't find anything, but it might be lack of my search abilities or just naming a problem differently :) I'm trying to assign my expression pedal (Pedal1) to two parameters - for example delay mix, and tremolo rate. I would like to switch...
  10. ales.prochazka

    Implemented Multitap Delay - levels modifiers

    It would be great, if multitap delay will also contains accessible modifiers for Level of each partial delay (Level1, Level2, Level3, Level4). I've just found some old preset from Axe FX II, converted it into Axe FX III using FracTool and this preset used some LFO-s to modify levels of each...
  11. C

    Help with Modifiers, Control Switches, & FC layouts

    Hi all, appreciate any guidance on the below items. I have searched through the manuals, but I am not confident too say that I may have overlooked something. I am looking at doing the following: 1. I would like to have a Control Switch mapped to an FC layout that would switch between an active...
  12. James Moon

    Wish Different pedal modifier settings per scene on same amp?

    I've been dreading asking this because I'm not sure if I can word my question correctly. My presets typically consist of two different amps and cabs partially panned left and right. Scenes 1-4 are dry while accending in gain per scene increase. Scenes 5-8 are identical only wet. I'm using an...
  13. darko89

    Fixed Bug: External 1 to toggle Input Boost, Fat switch and bright switch causes complete sound loss on FM3

    Hello everyone! I am having some issues with modifiers and midi messages. So the scenario is the following: I have a preset where I would like a midi message to toggle the Input boost, fat switch, and bright switch at the same time. I am setting the midi message to be 49 on the MIDI I/O...
    • darko89
    • Thread
    • bug external 1 fm3 modifiers
    • Replies: 6
    • Forum: FM3 Bugs
  14. maxolla

    How are you using Scene Controllers?

    Just got a patch set up today using Scene Modifiers and I’m really liking the ability to change block parameters using them. I used a modifier to change change gain on the Euro Red. There are actually three stages of sub-sequential gain boost. Never new that amp would do low gain sounds as...
  15. D

    Bug? Every Modifier Has the Same Settings

    Hey everyone, Since last update (Ares1.03), I haven't been able to use the ADSR since it's settings don't appear to change, it looks just like LFO settings. I noticed every modifier has the same settings too. This used to happen before this update, but just in the Axe-edit, in the Axe I was...
    • Darki
    • Thread
    • adsr ares axe edit bug bugs lfo control modifier modifiers same settings settings
    • Replies: 13
    • Forum: Axe-Fx II Bugs
  16. D

    Axe-Fx III controllers/modifiers capacity

    Hey all, Can anybody tell me, will Axe-Fx III users be able to run any more per preset than the 2x LFOs, 2x ADSRS, 1x Envelope and 1x Sequencer that we're limited to on the Axe-Fx II at present? And on the subject of controllers and modifiers: will it be possible to utilise a modifier for a...
  17. SRegal

    Using modifier to switch amp boost or bright switch on/off for scenes

    Hey guys, I'm new here and haven't found the info on this forum. I've had my AX8 all of 2 days and have gotten pretty far into it with the help of some of you guy's videos on youtube. I found @2112 videos particularly helpful! I saw in one of Leon's videos where he sets up a multi channel...
  18. rcv24

    wahwah always on?

    I'm using an Axe-FX II XL+ with MFC-101 and Mission Engineering SP-1. All firmware and presets are the latest. SP-1 is connected to XP1 (pedal sweep) and XP2 (toe switch) with TRS cables. I followed AxeFXtutorials.com on how to set the SP-1 up for use as a way and the switch as on/off. Then...
    • rcv24
    • Thread
    • axe 2 xl+ axe-fx ii xl+ controller mission engineering mission sp-1 modifier modifiers wah and volume
    • Replies: 1
    • Forum: Axe-Fx II Discussion
  19. sskkmm

    Preset change - volume block issues? Default on load question SOLVED

    Something I noticed after my first gig with the AX8... I prefer to have a volume pedal after drives and before delay/verbs...so instead of using the global volume pedal option, I have added the Vol block in my presets. However, when I switch presets, the preset is always at full volume even if...
    • sskkmm
    • Thread
    • default settings modifiers program change volume
    • Replies: 0
    • Forum: AX8 Discussion
  20. musicman0001

    Axe FX2 MkII Review Musicman0001 (and MESA amp recording)

    EDIT: My first recording and recording post: https://www.dropbox.com/s/8y7j9jnxxf7oong/metallica enter sandman-01.wav?dl=0 STACK: https://ritskes.stackstorage.com/index.php/s/VSGlDwCPmRoSOui http://forum.fractalaudio.com/threads/metallica-mkiic-enter-sandman-first-one.115791/ I LOVE THE...
  21. reclavea

    Bug? Edit modifier controllers...ie..LFO 1A, 2A, 1B, 2B ..etc not function

    Edit modifier controllers...ie..LFO 1A, 2A, 1B, 2B ..etc not functioning properly.
Back
Top Bottom