Rafa Diaz
Experienced
Now this is a treat! The Shimmer block is in another league compared to others I've tried.
Formidable Leon, as always
Now this is a treat! The Shimmer block is in another league compared to others I've tried.
Yep sure was. For shits n giggles, I just finished trying to install 6.02 from scratch, same results! A little frustrating for sure, but I'm not too concerned over the performer screen anyway. Taking it back down to 5.08 as I type.
Do you guys have a Filter block in your preset that wouldn't work (try to remember)?Mac OS
What change were you making when your Axe froze up?Updated both, worked fine...for a short while...like 15 minutes worth of playing. Made a change to one of my patches, the thing froze up on me.
MacOS and/or Win10...made no difference. Did the same thing with or without AxeEdit. I've narrowed it down to when I change from one preset to another, and if I'm not mistaken those particular presets do have a filter block or a wah, it would taken roughly 20-45 seconds for the preset to load, or it would just freeze up until I rebooted it. This behavior does not exist on firmware 5.08Do you guys have a Filter block in your preset that wouldn't work (try to remember)?
If so, did it have a Modifier on any parameters, like an LFO on the Frequency so it sweeped like a wah?
Just changing from patch 3 to 4.What change were you making when your Axe froze up?
I have the same problem. But even after waiting a couple of minutes my FC6 was still stuck in Failsafe mode. Tried to reinstall FC 1.06. But still the FC is stuck in Failsafe mode.
Any tips?
Holy shit batman, you solved it! I removed the filter blocks from my presets that had it, loaded in 6.02, and it works like a charm!! Thank you!!! Now I am afraid to put those blocks back in there. Any idea why the filter block is causing this issue?Do you guys have a Filter block in your preset that wouldn't work (try to remember)?
If so, did it have a Modifier on any parameters, like an LFO on the Frequency so it sweeped like a wah?
The filter block was updated to include its own LFO.Holy shit batman, you solved it! I removed the filter blocks from my presets that had it, loaded in 6.02, and it works like a charm!! Thank you!!! Now I am afraid to put those blocks back in there. Any idea why the filter block is causing this issue?
yeah i think this has to be the issue. it's why only a few people have reported it, so specific.the filter block (it does have a modifier)
Thanks for the tip, but I did already do the following: downgrade to FW 6.01, then install the FC to 1.06. At that point everything was working again.Try the load of the FC update once more, and when it finishes and ask you to reboot the FC, just disconnect the XLR cable at the FC (or at the AxeFX3, if that is easier for some reason). Give it a minute and then plug the XLR back in. Hope this might work for you. Cheers. Lee
Did you read the release notes? There are changes in both the Axe Fx and FC firmware for communication issues...Thanks for the tip, but I did already do the following: downgrade to FW 6.01, then install the FC to 1.06. At that point everything was working again.
After that I upgraded the FC to 1.08, then the AXE3 to 6.02.
Pfff, still have the feeling that something in the communication between the AXE3 and the FC is different in 6.02.....
You're amazing Chris...thank you SO much for pointing this out and working with all of us!!yeah i think this has to be the issue. it's why only a few people have reported it, so specific.
Hi Chris, no I dont think its a filter issue, its like, you are in preset 1 and axe edit does not obey any preset change orders, afterwards, on 6.02 fractal bot wont work either, it says communication time out, if you scroll with the unit using the ribbon scroll it wont work either......, if you go back to 6.0 everything works fine. but to 6.02 it has some bodies (here on Mac OS).Do you guys have a Filter block in your preset that wouldn't work (try to remember)?
If so, did it have a Modifier on any parameters, like an LFO on the Frequency so it sweeped like a wah?
You’re positive no filter blocks?Hi Chris, no I dont think its a filter issue, its like, you are in preset 1 and axe edit does not obey any preset change orders, afterwards, on 6.02 fractal bot wont work either, it says communication time out, if you scroll with the unit using the ribbon scroll it wont work either......, if you go back to 6.0 everything works fine. but to 6.02 it has some bodies (here on Mac OS).
let me double check...You’re positive no filter blocks?
That’s exactly what I was asking. It can’t get to 5 because it freezes. So I’m pretty sure it’s the filter block with a modifier on it causing the few issues.yes one preset has the filter block, for example it is on preset 5, with filter, so it won't scroll past 4, it maybe that filter thing the issue its an auto wah on filter