FiddlerTheDrum
Inspired
Cliff finishing Cyngus....I picture a Rocky training montage, but just with lifting heavy amps out of trunks of cars
I wish that we could do this. :-(EVH sounds like EVH through his own rig, but give him a Fender Twin with a stompbox and I bet he won't get that same Plexi tone he's known for.
You can't cheat physics. No 45 watt amp is going to have more output than a 100 watt amp into the same load. It's more likely that the 45 watter is breaking up more and the added harmonics are making it seem louder. Watts are watts. A power tube circuit will only supply so much power before you red plate a tube or smoke a transformer. If it was capable of more output, it would be rated higher.
SoonSo here it is the stupidest question of the entire forum:
How long before the official release of the firmware?
2 good minutesSoon
It might be helpful to understand the problem. Making even a single important change that has an effect on every Fractal preamp/amp model requires testing, and if necessary adjusting, the behavior of every amp model. A major change could also require adjusting the behavior of drives and effects, and even have global consequences. It's one hell of a big job and it will take as long as it does. Patience.So here it is the stupidest question of the entire forum:
How long before the official release of the firmware?
More like six months. And its funny how unlike the gym, he does all the work and you all are the ones getting pumped upCliff all month
SooneverSo here it is the stupidest question of the entire forum:
How long before the official release of the firmware?
That’s great, thanks a lot for sharing.
I have a question... how you (all of you guys) manage to get that kind of DI signal level... I play mostly with single coils, but the signal is so weak that the noise is very hard to manage when reamping or using plug-ins.
mis any way I can get a stronger direct signal when recording with usb?
In your opinion, what PV amp model would you consider closest to the PV Invective? Any pointers on how one could dial in any of the amp sims currently on the AX to come close? I live in a rural area and those kind of amps are not available to go play locally. I can only listen to YT clips and I know how reliable those are.Stealth adds a depth knob, two red channels and midi, otherwise it's the same. Easy to do in Axe.
Guitar DIs are usually down around -40dB or so.I generally have what appear to be weak or visually non-existent waveforms on my guitar DI’s. I actually loaded up some old Logic sessions over the weekend from when I was using Amplitube. I got concerned because these were my demos I recorded for songs that are going on my album and when I opened the sessions, the DI’s had zero indication that they contained any information at all. No waveforms to be seen. I pressed Play to listen and sure as shit, there was my guitar! Ran it through the AxeFX with zero issues, signal came out as strong as ever.
As long as it’s not a detriment to the re-amp that comes out of it in the end, I’m fine with it. I’d imagine boosting your input level would help get a bigger waveform, but I’m not sure if it’s necessary. I haven’t found that to be the case yet.
All things being equal, sure....but almost nothing is equal.You can't cheat physics. No 45 watt amp is going to have more output than a 100 watt amp into the same load. It's more likely that the 45 watter is breaking up more and the added harmonics are making it seem louder. Watts are watts. A power tube circuit will only supply so much power before you red plate a tube or smoke a transformer. If it was capable of more output, it would be rated higher.
6505In your opinion, what PV amp model would you consider closest to the PV Invective? Any pointers on how one could dial in any of the amp sims currently on the AX to come close? I live in a rural area and those kind of amps are not available to go play locally. I can only listen to YT clips and I know how reliable those are.
Less than 12 parsecs.So here it is the stupidest question of the entire forum:
How long before the official release of the firmware?