This "bug" is the most fun I've had playing with AMP parameters (I haven't even tried other blocks yet). I've never had time to play with most of the AMP parameters due to needing to turn A-E dial encoders as many as 10 times to span the whole range of a parameter (or using a mouse in AE3 which is also a bit clunky comparatively).
This begs a question. Can the encoder response be enhanced with an "acceleration feature" so that one rapid turn (CW or CCW) could go from one extreme to the mid-point (12 o'clock) and another rapid turn to reach the other end? Thus with quick turns one could quickly jump between three values: min (0% dial) <-> mid (50% dial) <-> max (100% dial). Turning slower would return to normal granular dial behavior. Perhaps there could be a config for dial acceleration: off, min/max (0%, 100%), min/mid/max (0%, 50%, 100%), or five values (0%, 25%, 50%, 75%, 100%). Could potentially be done for the main Value dial too (but it seems to have some acceleration already?).
If there is interest, I'll make a wish item.