Matman said:::repeat playing the opening note to 'Hey Nineteen' for 10 minutes::
Whoaa exactly!
Thank you Cliff!
Matman said:::repeat playing the opening note to 'Hey Nineteen' for 10 minutes::
Added ability to turn off Tuner sysex data streaming. To disable data streaming set “SEND TUNER SYSEX” to “OFF” in the I/O->MIDI menu.
Ringleader said:Added ability to turn off Tuner sysex data streaming. To disable data streaming set “SEND TUNER SYSEX” to “OFF” in the I/O->MIDI menu.
Interesting, so now that means there is sysex data for the internal tuner ? Cool!
joegold said:Cliff...
Any chance we'll ever see a Byp Mode parameter in the compressor block?
If not, then why?
There's a trick I could do with an External Controller assigned to the Compressor's Byp Mode (rather than using a CC controller controlling the Comp Block's bypass state globally - from the I/O menu's 3rd page) that would allow me to turn a compressor on in one preset, then switch to another preset (in which the Comp Block was saved in a Bypassed state) and have the compressor stay on.
This would be analogous to the way I'd use a real compressor, say a stomp-box type, while changing channels on a guitar amp or calling up various effects on my rack effects.
Any reason in particular that the Byp Mode parameter has been left out of the Comp Block all this time?
I notice that the only other effects blocks that do not have a Byp Mode parameter are: Filter, Enhancer, Mixer and Volume.
Even the Multiband Compressor has a Byp Mode parameter.
What's the deal?
At the very least I'm just curious.
I can't wait to get my Ultra. This is the type of customer service that spews excellence. Very cool.FractalAudio said:To emulate the Dynacomp set the Attack to 6 and the Release to 4. There's a lot of variation in those old pedals but that's a good starting point. Set the Detect type to RMS. The Axe-Fx compressor can do a little more sustain than the Dynacomp. I think around 8 on the Axe-Fx is max on the Dynacomp.
I can't give you any quick guide to where to set those for previous patches. The algorithm changed considerably so the best thing is to find settings you like and copy those to the other patches.
hideous said:+1 appreciation for the V30 cab! It's very close to the one that got taken down (the one many people liked, including myself). Was just playing through firmware 7.04 moments before 7.08, and the V30 cabs are very similar - new one has a bit of a beefier low end to it, to my ears. It's a belter.
New compressor is great.*
FractalAudio said:hideous said:+1 appreciation for the V30 cab! It's very close to the one that got taken down (the one many people liked, including myself). Was just playing through firmware 7.04 moments before 7.08, and the V30 cabs are very similar - new one has a bit of a beefier low end to it, to my ears. It's a belter.
New compressor is great.*
I like the new V30 better than the old one. It was made using my new sampling technique. I also redid several of the cabs using the new technique. I feel it makes the responses more natural sounding.
Is the new V30 a Marshall as well, same as you had used to replace the old V30 with ?FractalAudio said:I like the new V30 better than the old one. It was made using my new sampling technique. I also redid several of the cabs using the new technique. I feel it makes the responses more natural sounding.
FractalAudio said:hideous said:+1 appreciation for the V30 cab! It's very close to the one that got taken down (the one many people liked, including myself). Was just playing through firmware 7.04 moments before 7.08, and the V30 cabs are very similar - new one has a bit of a beefier low end to it, to my ears. It's a belter.
New compressor is great.*
I like the new V30 better than the old one. It was made using my new sampling technique. I also redid several of the cabs using the new technique. I feel it makes the responses more natural sounding.
I don't even think the Framus was a Framus!!!saxxamafone said:sweet!!
i didn't upgrade from 7.04 because of the V30 cab not being the same
sounds like it's time for me to finally upgrade :twisted:
So... is the new V30 cab still framuss?