Dpoirier
Fractal Fanatic
Of course you now need to disclose how you do that.
I used one of my expression pedals, assigned to External 1. For each PEQ block, I put a modifier on the BYP MODE, user External 1 as the source, and played around with the curves. When you assign an expression controller to a bypass, the trigger point is at 50%, so you just tweak the curves (for each successive PEQ block) so that they un-bypass at different ranges of the expression pedal's travel, i.e. 25%, 50%, 75% and 100%. Tweak to taste.
However, like I indicated in my previous post, I need to refine it all. Currently, as a push my expression pedal from heel to toe, I get cumulative PEQ blocks (as opposed to one at a time), so it's a little over the top. But it's dead simple to edit the blocks and give them lower gain levels. The overall effect with still be cumulative gain levels from no PEQ, to 1, to 2, to 3 and at toe-down to all 4.
(EDIT: I could also muck with the curves so that the previous PEQ block goes to bypass when the next one is activated, but the curves in the Axe are a pain in the butt to work with...)