The link lands on a 16”x10”x3” bag, but I’m assuming yours is really the 22.5”x11.5”x4” bag, is this correct?Amazon product ASIN B01MXPZWT0
fits to a T
The link lands on a 16”x10”x3” bag, but I’m assuming yours is really the 22.5”x11.5”x4” bag, is this correct?Amazon product ASIN B01MXPZWT0
fits to a T
The case he linked to is the right one for his pedalboard.The link lands on a 16”x10”x3” bag, but I’m assuming yours is really the 22.5”x11.5”x4” bag, is this correct?
Uh, thanks for chiming in, but the link takes me to the 16x10 bag, which would not fit an fc6 and two EV-1s. I’m really just trying to help avoid a situation where someone hastily orders the wrong size bag by accident is all.The case he linked to is the right one for his pedalboard.
Understood. @rnjscooter posted that link in response to @slinky005 , who asked him what case he was using for the pedalboard he posted earlier. If you follow that conversation chain backwards through the thread, you'll see that he's using an FC-6 and an EV-2 on a 15" x 10" board, which fits perfectly into the 16x10 bag.Uh, thanks for chiming in, but the link takes me to the 16x10 bag, which would not fit an fc6 and two EV-1s. I’m really just trying to help avoid a situation where someone hastily orders the wrong size bag by accident is all.
Understood. @rnjscooter posted that link in response to @slinky005 , who asked him what case he was using for the pedalboard he posted earlier. If you follow that conversation chain backwards through the thread, you'll see that he's using an FC-6 and an EV-2 on a 15" x 10" board, which fits perfectly into the 16x10 bag.
Awesome! Can you tell us how you utilize the dual FC12's? One for patches/scenes and other for IA's?View attachment 55203
The expression pedals used to fit on the board...oh well.
Awesome! Can you tell us how you utilize the dual FC12's? One for patches/scenes and other for IA's?
That's all very, very cool. Amazing that you can control the lights and lasers and such...This is my main show setup. All the red switches along the bottom are scenes 1-8, the violet buttons are setup as control switches operating the transport controls in my DAW for automated show control (lights, lasers, Axe-Fx). All the other switches are setup as IA's with channel switching on hold for channels A & B. Hold scene 2 button down to access channels C & D of the same IA's. Hold Scene 1 button to jump to a my default preset #1. When not in "show" mode, I drop the transport controls and add more IA's, looper access, preset up and down. I have it doing much more than this but still in the process of programming, the options are incredible.
Wow Leon! I was not aware that you could use knobs to control things such as delay level. What is the "knob box" you are using, or did you build it? Also, how do you assign that in a patch. The Axe III never ceases to amaze me!Just hooked this up. Expression pedal for wah, 3 expression knobs to assign to whatever I want to control (input trim, delay feedback & delay level in this preset) and then stand-in switches for tuner and a control switch assigned to the fat switch. I'm going to replace the external footswitch with a Boss FS-7 down the track but for now this is a whole lot of control at my toes.
View attachment 55204
An expression pedal is just a knob that you rock with your foot.I was not aware that you could use knobs to control things such as delay level.
Dang, really like the 3 expression knobs idea.Just hooked this up. Expression pedal for wah, 3 expression knobs to assign to whatever I want to control (input trim, delay feedback & delay level in this preset) and then stand-in switches for tuner and a control switch assigned to the fat switch. I'm going to replace the external footswitch with a Boss FS-7 down the track but for now this is a whole lot of control at my toes.
View attachment 55204
Wow Leon! I was not aware that you could use knobs to control things such as delay level. What is the "knob box" you are using, or did you build it? Also, how do you assign that in a patch. The Axe III never ceases to amaze me!
I think you need one more FC12.
My buddy showed up at the house with a plasma cutting table kit and asked if there was something we could make. $20 for a piece of aluminum and $30 to have it bent after we cut it. We had to make it from 2 pieces because the table wasn't wide enough for the FC-12 and 2 mission pedals. Still a work in progress, but you get the idea. Here's a link to a very rough cell phone video cutting it out:
View attachment 53832 View attachment 53833 View attachment 53834 View attachment 53835[/QUOTE
sorry,, didn't see this earlier.I had to take the end caps off.That looks great! How are you securing your FC12 to the TempleBoard. I'm trying on mine right now but the gap is too wide (between the board and the bottom of the FC12). Thanks!
This is my main show setup. All the red switches along the bottom are scenes 1-8, the violet buttons are setup as control switches operating the transport controls in my DAW for automated show control (lights, lasers, Axe-Fx). All the other switches are setup as IA's with channel switching on hold for channels A & B. Hold scene 2 button down to access channels C & D of the same IA's. Hold Scene 1 button to jump to a my default preset #1. When not in "show" mode, I drop the transport controls and add more IA's, looper access, preset up and down. I have it doing much more than this but still in the process of programming, the options are incredible.