Presets updated to 10.02, and now available for download 
Get them here :
Fremen's guitar blog: Presets for firmware 10
Comments, suggestions, questions... shoot !
The dude from Dune
EDIT : Details on some presets :
031 With or without you :
Expression pedal 1 controls the shimmer level (max volume = toe up)
Expression pedal 2 controls the volume of the intro sequence
Expression pedal 3 controls the volume of the eBow
The notes of the Ebow are assigned to scenes 1-5. Beware : I tune in Eb
The delay and sequencer are tied to the tempo. use tap tempo if you need to
062 Comfortably Numb :
Scene 1 rhythm
Scene 2 lead
Scene 3 lead with flanger
Expression pedal 1 raise (toe up) the delay volume and feedback (used in a specific part of the end solo)
Expression pedal 2 morphs between distortion (verses) and acoustic (chorus)
In previous firmwares I used the Hiwatt model like David Gilmour, but this time I use a Cornford.
Presets 09, 10, 19, 20 (my main lead sounds) :
I added a second amp to avoid the short sound cut when going from X to Y using scenes. Now when I select another scene the transition is seamless, I alternate between amp 1 and 2 instead of X/Y in the same amp
Usually in these presets, scene 1 basic sound, scene 2 harder, scene 3 softer... Check them all !
There's a custom harmonizer settings tied to pedal 1 in preset 020, I'll check the custom scale later
Preset 14 : the last scene is now a lead sound.
I use 3 expression pedals with the MFC-101 ; for my live presets (001-062), pedal 1 usually controls gain or other special effects, pedal 2 wha or whammy, pedal 3 volume. Some MFC-101 settings : bank size = 10, switches 11-15 assigned to scenes 1-5, which I uses a lot in my presets, switch 16 = tempo/tuner, switch 17 = volume boost.
Get them here :
Fremen's guitar blog: Presets for firmware 10
Comments, suggestions, questions... shoot !
The dude from Dune
EDIT : Details on some presets :
031 With or without you :
Expression pedal 1 controls the shimmer level (max volume = toe up)
Expression pedal 2 controls the volume of the intro sequence
Expression pedal 3 controls the volume of the eBow
The notes of the Ebow are assigned to scenes 1-5. Beware : I tune in Eb
The delay and sequencer are tied to the tempo. use tap tempo if you need to
062 Comfortably Numb :
Scene 1 rhythm
Scene 2 lead
Scene 3 lead with flanger
Expression pedal 1 raise (toe up) the delay volume and feedback (used in a specific part of the end solo)
Expression pedal 2 morphs between distortion (verses) and acoustic (chorus)
In previous firmwares I used the Hiwatt model like David Gilmour, but this time I use a Cornford.
Presets 09, 10, 19, 20 (my main lead sounds) :
I added a second amp to avoid the short sound cut when going from X to Y using scenes. Now when I select another scene the transition is seamless, I alternate between amp 1 and 2 instead of X/Y in the same amp
Usually in these presets, scene 1 basic sound, scene 2 harder, scene 3 softer... Check them all !
There's a custom harmonizer settings tied to pedal 1 in preset 020, I'll check the custom scale later
Preset 14 : the last scene is now a lead sound.
I use 3 expression pedals with the MFC-101 ; for my live presets (001-062), pedal 1 usually controls gain or other special effects, pedal 2 wha or whammy, pedal 3 volume. Some MFC-101 settings : bank size = 10, switches 11-15 assigned to scenes 1-5, which I uses a lot in my presets, switch 16 = tempo/tuner, switch 17 = volume boost.
Last edited:
