Bienvenue!Hello, excuse me, I'm a bit shy. Translated from French by a logician.
When on the Cab block I do "copy curent channel to all channels", the copy is not done if the location of Cab 3: L and/or Cab 4: R are active.
I use Axe Edit, the last one.
I don't know if I should report this here or under the Axe Edit thread.
I'm sorry if I posted in the wrong place.
I take this opportunity to thank all the Fractal team for all these moments of happiness ;-)
Once I turned edit off it worked, thanks.Are you using standalone FractalBot or the one embedded in Axe-Edit?
If standalone, make sure Axe-Edit is closed, otherwise make sure the standalone FractalBot is closed.
Try a different USB cable and port.
Hello, excuse me, I'm a bit shy. Translated from French by a logician.
When on the Cab block I do "copy curent channel to all channels", the copy is not done if the location of Cab 3: L and/or Cab 4: R are active.
I use Axe Edit, the last one.
I don't know if I should report this here or under the Axe Edit thread.
I'm sorry if I posted in the wrong place.
I take this opportunity to thank all the Fractal team for all these moments of happiness ;-)
Just to clarify, If I import 1000ms IR's from the GGD Cali or Zilla cabs and put them in Cab slots 3&4 I will get 1000ms IR's?You can load 500ms IR into the FullRes slots and they will be 500ms.
In case anyone was wondering what the new verbs sound like on synth, skip to about 6:30 here
Have you tried with Axe-Edit closed or paused?Crackling in my Turbo when making a kitchen sink preset - CPU never hits 80 but if I remove some blocks the crackling stops.
View attachment 90506
In case anyone was wondering what the new verbs sound like on synth, skip to about 6:30 here
Just tested - with AxeEdit closed it is working fineHave you tried with Axe-Edit closed or paused?
Have you tried with Axe-Edit closed or paused?
That's interesting as Axe-Edit doesn't affect CPU load as was the case with Axe Fx II and AX8.Just tested - with AxeEdit closed it is working fine
Not to belabor the obvious, but does that happen with the same IR selected in all channels?Anyone having channel B on the cab1 block really quiet and dull, but A/C/D are all normal volume? Tried a reboot, didnt fix it. MkI Axe 3.
Yeah, maybe AxeEdit doesn't think the turbo should have as much power as it does lolThat's interesting as Axe-Edit doesn't affect CPU load as was the case with Axe Fx II and AX8.
No it doesnt matter what IR I choose. Ill try diff presets tonight.Not to belabor the obvious, but does that happen with the same IR selected in all channels?
No it doesnt matter what IR I choose. Ill try diff presets tonight.
Earworm now. ThanksIt's Love Beta #9....