Here is the new version:
https://dl.dropbox.com/u/54889552/AxeForLemur.1.99b7.zip
Change Log:
****************************************
Oct 29, 2012
Axe for Lemur version 1.99b7
---New Features---
Adds Multi Delay block
Adds Mega Tap Delay block
Adds Zoom button - increases Fader resolution by 10 X when zoomed
Looper block (II only) revised to take advantage of Looper status messages
Adds Looper Position indicator (II only)
Adds retry when querying parameters, enabled when incoming sysex success is >= 75%
Adds retry when adjusting controls, should help minimize instances of incomplete value text
Adds retry when querying preset name
Adds BypassMode control to most blocks
Adds Battery state-of-charge monitor
Adds Incoming Sysex 'success' monitor
Tap hold the MTX button to query preset name & bypass states
Adds support for AxeFX II firmware v9.00beta amp types and new pedal2 compressor type
Adds support for AxeFX II firmware v9.00beta Scenes using CC# 34. Template queries Bypass State after sending CC#34 message.
Adds LED to each block, which goes GREEN after querying the block. If LED is RED, the block needs to be queried.
---Changes---
Shift button is shown only when on MTX page
Rearranged layout of preset page
Delay block - Rearranged layout so Mix knob is always available
Delay block - Add buttons to adjust Motor Speed knob (semitone up, semitone down, reset to '1')
Sysex status moved to preset page, increase font size
Sysex status: adds a monitor that displays 'Remaining' params to query
Removed the left-most up/down/clear buttons on preset page, saves some memory
Removed +0.5db/-0.5db buttons from Level faders in many blocks, to save memory (use Zoom instead)
Removed units from value text above multi sliders
Increased max # of params that can be queried during a get-all, from 500 to 750
The preset name stored in favorite button is limited to first 12 characters of actual preset name
Replaced the hidden knobs with object(s) that take less memory
---Bugs, Issues---
Fixed bug: Tap-hold cmp/drv button not working correctly
Fixed bug: Unable to select Filter, Vol, PEQ, or GEQ instance
Fixed bug: Delay block 'Config' updates in main window, but does not update in dialog when changing 'Type'
Known issue: Template queries all params in a block regardless of that block's 'Type' value, slows performance when getting params of some blocks (delay, multi delay, pitch)
Known issue: Looper position indicator does not accurately show remaining loop memory during REC
Known issue: Template may not show all blocks in the preset after tapping Get All. Caused by a Lemur bug(*)
Known issue: Value text above knob or other control is sometimes incomplete. Caused by a Lemur bug(*)
(*)Known Lemur bug: Incoming sysex messages can be truncated, believe to be a timing problem. To avoid the problem, use high speed usb+wifi connection instead of slow hardware midi.