Search results for query: *

  • Users: raz
  • Order by date
  1. raz

    Tim Pierce Toy Matinee Video

    One of my favorite albums of all time.
  2. raz

    U2 delays...

    Settings for the Edge's delays vary from song to song, but the dotted 1/8th delay is a common setting. For "Where the Streets Have No Name," I use two mono delay blocks, post-cab. IIRC, one of the blocks is set to tempo 1/8dot with feedback enough to get two solid echos and volume set to...
  3. raz

    Ultra Version 9.01 Firmware Available

    Dayum! I'm off the forum for a week or two and Cliff gets all busy and releases an update! With a new amp! And my favorite drive pedal! Argh, I could have telecommuted today!
  4. raz

    The Big FRFR Shootout

    Here's the viewpoint of the guy that brought the K-10 to the big shootout: http://psg.com/~dlamkins/lamkins-guitar ... comparison
  5. raz

    The Big FRFR Shootout

    Yes, but that's my point: the quality that most stood out about the FBT-12ma's playing the recorded music was bass response. The significance of such response when reproducing a recording of a full ensemble is a different consideration than when reproducing only the signal from a single...
  6. raz

    The Big FRFR Shootout

    Weeeeeeelllll...no, that wouldn't quite be unanimous. What was unanimous was that we preferred the FBT-12ma's rendering of the recorded track played back from your playback device. I don't know whether it added or omitted frequencies. It had a big bass sound, and I like big bass sounds, but...
  7. raz

    Atomic Reactor FR vs Verve 12ma

    Neither sounded better than the other, nor better than the QSC-K10's or the FBT-8mas. We heard no sonic variances among the speakers that wouldn't have been cancelled out by quick tweaks to the test patches. I thought my Atomics felt less stiff, but I was the only one who seemed to think so...
  8. raz

    Atomic Reactor FR vs Verve 12ma

  9. raz

    Atomic Reactor FR vs Verve 12ma

    It also wasn't our intent to evaluate these speakers and pick a "winner." From the start it wasn't intended to be scientific, at least not to my mind, though we tried to keep it as consistent as possible. And we did note certain anomalies of the acoustic environment as Jay hints, but for what...
  10. raz

    Tom Schotz Power Soak

    And in any case, an MXR EQ was a far bigger factor in the Boston sound than the soaks.
  11. raz

    Can this be done with CC messages? (Wah/Whammy)

    Nice catch, iaresee. That would do it, I think.
  12. raz

    I need a good lead boost CC. Suggestions wanted (please!)

    I use the trick from the Axe-Fx Wiki...a mixer block at the end of the chain: "To emulate the solo "BOOST" feature found on TC Electronics units, place a Mixer block at the end of your signal chain and attach an external controller to control the overall output gain (on page 2). Somewhere...
  13. raz

    Can this be done with CC messages? (Wah/Whammy)

    Ehh...I don't think so. I have a GCP, and to my knowledge, it can't send two commands from one IA switch, and it can't do a "step-through" program a la the Liquid-Foot products. Without both of these features, there's no way to get the three possible states that trouble311 wants. I think...
  14. raz

    help with lfjr and volume and wah on the same mission pedal?

    Yeah, I kept telling myself to put this reminder in, and kept forgetting. You HAVE to calibrate both your expression pedal and toe switch or it won't work.
  15. raz

    help with lfjr and volume and wah on the same mission pedal?

    Oh, hell. There's an error in my previous instructions. The data values for the bypass are reversed. That's what happens when I do this without having the unit in my hand. Okay, I've got the unit in my hand. I'm going to go through it step by step as I have it configured. I know it's...
  16. raz

    help with lfjr and volume and wah on the same mission pedal?

    Let's see if I've got this straight: 1. In the global menu you set EXP1 to control the CC# for External 2 (volume block) and EXP2 to control WAH1 Byp. 2. In the override you set EXP1 to control the CC# for External 1 (wah freq) and EXP2 to control Vol/Pan Byp Is that correct? If so, then you...
  17. raz

    Brewster Christmas

    I understand where that idea comes from, and believers should always scrutinize their motives and motivations. However, what I saw in that clip was not really that terribly expensive to do in the first place. It was just projection and computer generated graphics, on a nicely arranged stage...
  18. raz

    Is this possible with the Standard?

    The Standard provides plenty of power and delay options to handle U2 stuff. The Ultra's Megatap delay is not required to do the Edge's delay tricks.
  19. raz

    Liquid Foot Jr. with Square 1 Expression Pedal

    Well, yes, but he was talking about volume, and regardless of that, in your scenario where you run things backwards to how I do it - clever, btw - you're still dealing with an extreme of effect. In that heel down scenario, no, you aren't adding effect, but yes, you are removing all of it...
  20. raz

    Parametric EQ tip - 'Contouring your sound'

    It's not about "fix." It's about getting what you want. A lot of folks get turned off because they set up a preset using, for example, a Mesa amp model and then can't get it to sound like the real Mesa they had. When EQ gets suggested, they often exclaim that it should be enough to use the...
  21. raz

    Brewster Christmas

    Jokes aside, yeah, you do. Several in Austin, several in Dallas, some up in Minnesota and Michigan, over in Atlanta, up in the Carolinas. There are mega churches all over the Bible Belt that are embracing modern worship music and performance. Granted, having Lincoln Brewster as an associate...
  22. raz

    Parametric EQ tip - 'Contouring your sound'

    Yeah, well, being a moron, my other senses have kicked in stronger to compensate. So I hear really, really well. ;-) Scott, I know you didn't call anyone a moron, and my post wasn't directed at anyone in particular, least of all you. Most of the folks here - you included - have been very...
  23. raz

    LF Jnr - Can you have different CC's for different presets?

    Yes, you can override IA switches on a per-preset basis. You can also re-program the CC# of an expression pedal on the fly, so that you can have one expression pedal do duty controlling Volume, Wah, and any other continuous control item. That's the short answer. Getting this stuff working...
  24. raz

    Liquid Foot Jr. with Square 1 Expression Pedal

    No way of which I can conceive. There's no way to click that toe switch without maximizing the travel of the expression pedal. You'd have to use a different footswitch. Reading between the lines here, seems you're probably using your volume pedal to give you a solo boost, so that normal...
  25. raz

    Parametric EQ tip - 'Contouring your sound'

    I think most of us have seen the chisel any number of times, and could even have identified that it's a chisel. The problem is that using a chisel is an art that requires practice and study. If you're accustomed to buying prehung doors, and exchanging them if they don't fit, and every time...
  26. raz

    Liquid Foot Jr. with Square 1 Expression Pedal

    Sheesh...what an ordeal. Yeah, that did the trick, Java. First I had to get the Mission Kit-M; a momentary switch. Received that tonight, then spent until 5:00 AM trying to get it operational. Of course, the last thing I tried was your advice. Go figger. So - yeah, DON'T try to program the...
  27. raz

    Atomic Reactor FR vs Verve 12ma

    What's disappointing is that one of the companies DOES publish a graph, and it's not Atomic. I couldn't speak for how honest FBT's graph is, but they published it.
  28. raz

    Atomic Reactor FR vs Verve 12ma

    Imagine if the manufacturer of a car used that excuse for not installing a speedometer. Okay, to be less facetious, imagine if an automobile manufacturer claimed to have built a car that did 100mpg, but refused to publish the results of their tests and wouldn't say how fast the car was going...
  29. raz

    Atomic Reactor FR vs Verve 12ma

    If this topic is ridiculous to you, don't read it and don't post on it. Go play guitar and make music while we nitpick every little detail and you might become a better musician than we. :roll:
  30. raz

    Atomic Reactor FR vs Verve 12ma

    Yikes. That's disappointing, and gives the lie to my earlier conjecture that we'd be more likely to get such information from Tom & co than from FBT. That's really disappointing. I don't like this at all.
  31. raz

    Tone Improvement Since Earliest Version to 9.0

    I can't speak to the H@K, but I used an MP1 for several years, and in my opinion the Axe-FX sounds better, simulations and all. My opinion. If you're using an MP1, you're tweaker enough to handle the Axe-FX. Yes, there's a whole lot more you can tweak in the Axe than the MP1, so you just...
  32. raz

    ELGIN IL LIQUIDFOOT PRO EXPERT WANTED

    Damn, ask for help and get an offer from the builder. Don't suppose you're headed to the Seattle area any time soon, Jeff?
  33. raz

    Using the Reactor FR as a tube poweramp like a VHT or Mesa.

    If you set the switch for External Speaker, it will turn off the Reactor FR's speaker and tweeter and turn the jack into an output. You must make sure then to not run the Reactor without a load connected, or the usual tube amp rules apply and you'll damage your output transformer. As for how...
  34. raz

    will mfc101 be able to access all three banks A,B, and C?

    Yes, indeed.
  35. raz

    Liquid Foot Jr. with Square 1 Expression Pedal

    Hmm...no, didn't think of that. I'll give it a go tonight when I get home from work. Thank you muchly!
  36. raz

    Liquid Foot Jr. with Square 1 Expression Pedal

    Okay, no one on the Liquid-Foot forum seems to have an answer for this, and seems Jeff's too busy to respond to my PM, so I'll try here. I have a Liquid-Foot Jr. and one of Stilwel's Square 1 expression pedals with a toe switch. I want to configure it as Jeff describes in a Tips and Tricks...
  37. raz

    will mfc101 be able to access all three banks A,B, and C?

    Yes, but the Liquid-Foot specs can create this confusion. The LF controllers are capable of STORING only 252 presets, but in Direct Control Mode with an Axe-FX, they can scroll to all 383 presets or you can directly input the preset number and it will take you there. But if you're trying to...
  38. raz

    Tone Improvement Since Earliest Version to 9.0

    In my opinion, it's been a continuous improvement since I started with v5.x - though guess I should qualify that not all of the updates have been about tone improvment. Others have disagreed here and there, and I sometimes wonder what I might be missing that their golden ears hear. But I think...
  39. raz

    Marshall JCM800 Tweak Guide with Version 9.x Firmware

    Whoa, Scott...I like it. Even with the stock cabs (I haven't had time yet to figure out the Redwirez mixing), those are very musical, very usable settings. Very, cool.
  40. raz

    Use Axe-Fx with Bass guitar?

    And an 8x10 cabinet model. For my money, all I need for bass. Big, fat, warm sound with just the right amount of articulation.
  41. raz

    Atomic Reactor FR vs Verve 12ma

    Have you actually used a Reactor FR? I had gotten the impression from your posts that you hadn't, but you seem very adamant here - so did I miss something? You've actually compared the two units? Not trying to be argumentative here; I'm curious, because I haven't seen any posts on this...
  42. raz

    Atomic Reactor FR vs Verve 12ma

    You're going to inadvertently get me in trouble on this thread ;-). I received my Reactor FR's late last week, which is why I posted here.
  43. raz

    Atomic Reactor FR vs Verve 12ma

    Watts don't tell the story of volume in any accurate fashion. If we assume all else is equal, then the 100 watt Verve will be 3dB louder, no more, no less. But it isn't safe to assume all else is equal in this case. We'd have to see some hardcore analysis. I can say this - my Atomics do very...
  44. raz

    FRFR Atomic manly size 4x12 cab...

    How are you defining passive? The FR has a switch to put it in passive mode and allow you to plug an amplifier into it. But if you're wanting one without an amplifier at all, that's a different deal. As for a 4x12 FR, what would we gain from that besides it looking "manly?" I've got a killer...
  45. raz

    Passive Atomic FR soon?

    The Reactor FR's have a switch to put them into passive mode and allow them to be used with an external amplifier.
  46. raz

    My first gig with Axe-Fx...worst fears realised

    In my experience, this isn't sufficient to ensure what's going to work at the gig. It's better than dialing in without the backing tracks and hoping for the best, but it just doesn't reflect reality enough. I have to dial in my presets at a rehearsal with the band. I lucked into some of my...
  47. raz

    Atomic FR Arrived Yesterday!

    But does it differ from any other high gain amp in this sense? My Atomics arrived couple of days ago and I'm loving them so far, but I will confess that I've approached them very carefully. Low volume, low tweeter settings and work up. I find that observing the same protocols I'd follow...
  48. raz

    Riddle me this FRFR guys

    Exactly. It's not about which monitor produces better guitar tone, or whether the monitor produces better tone than the FOH. It's about which monitor provides the better reference to compromise across all the FOH speakers and FOH conditions. The nuances of a delicately crafted guitar tone get...
  49. raz

    Will tubes go away??

    There they are - the only rational conclusions possible in the entirety of the debate.
  50. raz

    Steve Miller Jungle Love

    Seconding this request. I would really like to know how to dial in that tone. If someone knows what amp and guitar were used on that track, that would be helpful too.
  51. raz

    Tipps on Easily Obtaining Controlled Feedback

    Here's a suggestion: Cliff's Plexi 1 with the Master and Sag cranked to 10 idea. Tiny amount of delay. Two Atomic Reactor FR's (they arrived today). Don Grosh Retro Classic (stratocaster) strung with 10's. 3 minutes of sustained feedback on a fretted E (3rd String 9th fret). Touched the...
  52. raz

    Tipps on Easily Obtaining Controlled Feedback

    Yes, yes, yes. What Cliff said. Thank-you. In my haste to post before I went to a meeting, I forgot to come back and clarify squeal from the feedback we actually want - from the strings. And Cliff's being kind to me in gently correcting only that. There are a couple of misstatements, as I...
  53. raz

    Tipps on Easily Obtaining Controlled Feedback

    What nobody is chiming in here with is the very nature of feedback. Feedback happens when you create a loop between an audio input and an audio output in a circuit in which the gain of the input is increased. When signal goes into the input and comes out the output, if it gets picked up again...
  54. raz

    Don't be afraid to crank the Master and Sag now...

    Whoa! I LIKE it. Plexi 1, Redwirez cabs, and a little delay. Sag and Master wide open. You ain't kiddin' about bouncy. Now, what the hell Redwirez were in User 1 and User 7? Hmm.
  55. raz

    Help a newb install firmware PLEASE!

    Just a suggestion to whoever made the cables - make the midi connectors the same size as most of the other cables in the world. ;)
  56. raz

    The new 9.0 presets.

    No, you didn't. They might sound different because of the firmware update. But they aren't new patches. A firmware update does not load new patches.
  57. raz

    OK really stupid newbie Q how to upload new banks

    Use the latest edition of the Beta editor. * Start the editor and make sure the title bar displays the little check mark and says Connect : AXE-FX : Ultra : 9.00 : ID = 125. It will say Standard instead of Ultra if you have a standard. If it doesn't say that, then you need to set your Audio...
  58. raz

    Question about Banks A, B, C

    Re: Stupid question... The banks aren't really firmware, at least not as the word is commonly understood. But yes, if you load a bank, it will overwrite whatever is already in that bank. Really, I don't recommend going back to banks related to prior firmware versions, nor do I think it's a...
  59. raz

    Question about Banks A, B, C

    Re: Stupid question... http://www.fractalaudio.com/Documents/ Everything you ever wanted to see. Be careful with the power, young Jedi.
  60. raz

    Ultra Firmware Version 9.00 Released

    Someday, I have to believe Cliff is going to pump up a firmware update that does absolutely nothing, just to hear all of us rave about how much better everything is. The temptation must be intense for him. :twisted: I dunno, I think I hear the differences. I think the feel is improved. It...
  61. raz

    this thing is very daunting for a noob...

    Different opinion here; Exploring the presets to see what they can do is fine, but I don't recommend that a beginner start by tweaking existing presets. To me, that's like deciding to learn to swim when you arrive in the middle of the ocean for a scuba diving trip. The factory presets were...
  62. raz

    Cranking the "Master"...

    Yes, and amazinger, too...er.
  63. raz

    Reduced Switching Time Between Presets???

    At 30ms we run into the psychoacoustic phenomena that allows us to ignore a certain amount of latency. It's the phenomena that allows an orchestra to play together and stay in time when musicians are separated by relatively large distances. The Haas effect, which describes the limit of the...
  64. raz

    Ultra Firmware Version 9.00 Released

    Damn. Damn. Damn. Damn. Damn. 1 hour 12 minutes until work's over. Then 1 hr 30 for commute. Then 2 hrs until the kids go to bed and I can load the update. And, of course, the clock just slowed to a crawl. I think it's laughing at me. Damn. Damn. Damn. Sigh.
  65. raz

    Easy (hopefully) MIDI question (Ground Control + Axe-Fx)

    Since the factory presets are always readily available for download, the general idea is you'd just overwrite Bank A with your own work. The Ultra ships with all three banks filled with factory presets, so there's no choice but to overwrite something. The intent of the factory presets is to...
  66. raz

    Any Standard users wish they would have gotten the Ultra

    Yeah, I did it with my Standard. I've since purchased an Ultra, but Streets could be done with a Standard. Multiple amps suck up a lot of processor, but you don't need two amps to do Streets anyway. I did it with a single amp block (Top Boost), but stereo cab (2x12 Brit) mic'd with SM-57's...
  67. raz

    Easy (hopefully) MIDI question (Ground Control + Axe-Fx)

    No, you read this correctly. It will only go to 254. I missed that in your original post. If you've done your work in Bank C, I would switch Bank C to Bank A or Bank B. Using Axe-Edit, Save your Bank C to your computer, load Bank B to bank C, Bank A to Bank B, and then load your saved bank...
  68. raz

    Lincoln Brewster has Ultra and Liquid Foot Jr

    Aw, not by much. Fine guitar players, fine tones, fine processors, fine liquors...it's all about sniffing corks. ;-) I mean substitute EQ blocks, cabinet drive and filtering for nose, bouquet, and finish...it's the same thing. You looked closer at the filter block than I did, and probably...
  69. raz

    Lincoln Brewster has Ultra and Liquid Foot Jr

    I asked him during his presentation what he was doing with the EQ on the Axe, half-expecting him to describe that - his usual thing with the Pods. But he said he couldn't remember offhand. When MKEditor was poking around later, I was looking over his shoulder - didn't catch all of it, but...
  70. raz

    axe fx vs amp modeling software

    When have you ever gotten "great" results out of anything without lots of work? Greatness in any endeavor, be it tiddle-dee-winks, playing the guitar, or making an Axe-FX sound great, requires dedicated, focused, consistent effort. "Average," "fair-to-middling" and "okay" are easy to get to...
  71. raz

    Which Expression Pedal do you use with GCP?

    I've never found any way to calibrate a pedal in a GCP. I've been using one of Stilwel's Square One pedals for wah or formant control, and an Ernie Ball VP jr. for volume, delay, or other things as appropriate. But I have a Liquid Foot Jr. en route to me so the Ground Control Pro will be...
  72. raz

    Having some problems

    The inputs on the Kontrol are each mono, as are the outputs on the Axe-FX. If you only run one cable, you're only going to get mono. You need to run cables from both outputs on the Axe, to both inputs on the Kontrol (provided that's possible - read your instructions). It's hard to say, there...
  73. raz

    In appreciation of Tom and Cliff and company...

    Tom called me tonight to let me know that he'd reached my name on the Reactor FR waiting list. I ordered two. I've gotta say, the man is as patient and courteous on the phone as he has been with me on e-mail. He solicited any questions that I might have, and offered suggestions about...
  74. raz

    Little features you like about the Axe-Fx

    Those same ones. In 3rd place, the ability to grab an effect block from another preset.
  75. raz

    FR Reactor ... some thoughts

    The XLR out on the Reactor FR is just a throughput. It's not coming from the power section. The answer to the question is "yes." The experience of the tube amp onstage for the player could not be adequately or consistently translated to the audience. Unless the audience is standing onstage...
  76. raz

    Headphones and Axe Need Help!

    Are you using some really hot pickups in your guitar? Your input knob seems low to me. With my dual humbucker guitar mine is set around 12:00, with single coils, more like 2:30. When I hear thin and metallic in my ears in any kind of direct scenario (like direct to the Mackie and...
  77. raz

    Name your favorite amp sim please

    I absolutely love the Top Boost model. I also love mixing the Brownface and Blackface models, and at last night's gig I loved the results I got from some programs I did with the Plexi 2 for rhythm and the HAD for lead. But they haven't supplanted the Top Boost yet.
  78. raz

    Ultra flakeout?

    Thanks, Cliff...that's what I assumed. In trying to solve all this, I came across posts about holding a button down while restarting the unit to hard reset or something. But I can't find anything in the documentation, the wiki, or anything really firm about that here. Is there such a feature?
  79. raz

    Ultra flakeout?

    No, the problem apparently is that I'm an idiot. When I first built my preset, I used a stereo cab, and two mono delay blocks in parallel. The first was a dotted eighth delay, mixed at 70%. The second was a quarter note delay, mixed at 50%. When I switched the cabinet to User 5, where I had...
  80. raz

    Ultra flakeout?

    I recently sold my Standard and bought a newer Ultra. I've been tweaking with it for most of two weeks now, getting new sounds dialed in, etc. So last night I decided to try out the Redwirez IR's. Bought and downloaded the Big Box bundle. Using Axe-Edit - the latest beta, .300 or whatever -...
  81. raz

    Any Standard users wish they would have gotten the Ultra

    When I bought my Standard, I had the money for the Ultra, but decided against spending it because it was obvious that the Ultra didn't provide any extra features that I'd really need. In the months afterward, I came to regret that decision - not because there was anything in the Ultra that I...
  82. raz

    MFC-101 Pics from LA Amp Show

    Search the forum for the other threads that discuss the functionality in detail. The reason those details didn't show up on this thread is that they've been discussed heavily in other threads. In short, it comes down mostly to price, size, the potential for physical expansion, and, let's face...
  83. raz

    Patiently waiting for 9.0?

    I've been married 20. I love pizza and beer, but if I get to the point where that and the prospect of watching a bunch of sweaty men excites me more than my wife buying sexy lingerie, would someone here please do me a favor and shoot me? Thanks.
  84. raz

    Lincoln Brewster has Ultra and Liquid Foot Jr

    I'll be seeing him at CMS here in Seattle area weekend of Nov 14. Hoping I might be able to talk to him about settings and such. I had to play a conference gig Saturday in which we were doing a couple of his songs. So I found a website out there that had a rundown of how he usually...
  85. raz

    Red Wirez system as a purchasable Axe-Fx firmware upgrade?

    Yeah, I can definitely understand that. But hey - having "only" ten user slots is still a pretty good problem to have, yes?
  86. raz

    Easy (hopefully) MIDI question (Ground Control + Axe-Fx)

    Use MIDI Mapping. See what patches the Ground Control DOES switch to when you step on it to determine what Midi patch locations it's calling. On your Axe, go to the I/O screen and page to the MIDI tab. Set Map From to the number of a patch on the GC, and the Map To to the number of the patch...
  87. raz

    MFC-101 Pics from LA Amp Show

    Yeah, I just had a bad case of brain gas. Sorry. Here, could someone help me pull my foot out of my mouth?
  88. raz

    MFC-101 Pics from LA Amp Show

    Perhaps I got confoozed. I'll go read it again.
  89. raz

    MFC-101 Pics from LA Amp Show

    I'm laughing my a** off, Stilwell. I went through the thread twice, and it just doesn't seem like anyone's listening. Stilwel has said twice now that there were NO MFC-101's with blue displays at the show. None. Zip. Nada. The apparent blueness of one display in the pictures is a fault of...
  90. raz

    Just got off the phone... (Reactor FR Content)

    I'll be ordering two when Tom gets to my name on the list. MKEditor and I are talking about doing a comparo between my Atomics and his FBT's...probably will be early to mid November. We'll try to do it as scientifically as possible, and will probably solicit the participation of a mutual...
  91. raz

    The Current State of My Rig

    Okay, once I know when the Atomics coming, we'll start planning...Mike R's going to need to shoot some tracks for our band promo cd so maybe we'll coordinate around that. That way we might even be able to post some comparative recordings, since I'll have the gear with me. It'll have to be...
  92. raz

    The Current State of My Rig

    Okay, once I know when they're coming, we'll set something up...Mike R's going to need to shoot some tracks for our band promo cd so maybe we'll coordinate around that. That way we might even be able to post some comparative recordings, since I'll have the gear set up. It'll have to be...
  93. raz

    The Current State of My Rig

    You don't do anything halfway, do you? :P Mike R. told me you'd picked up a set of the FBT's, and that the FBT's sound better than the QSC's. I also seem to remember that you were resistant to drinking the Atomic FRFR kool-aid. I sold my QSC's because I hated lugging them, needed some new...
  94. raz

    Live Rig

    I use a Shure PSM-400 and E5 earbuds with the triple-flange sleeves. To me, it's far easier with the Axe-Fx than the Vetta ever was. The Axe-Fx's ability to put separate EQ on the two sets of outputs makes a huge difference. That said, it's a lot easier to get yourself in trouble with the...
  95. raz

    Amp sim requests

    Here's another vote for the Marshall 1974x - and its progenitor, the Watkins Dominator. Raz
  96. raz

    FAS and Axe-Fx Logo Gear?

    Black or Dark blue polo shirt with the Fractal logo in silver embroidery on the left front. Dark Blue bowling shirt with the logo. Dark blue T-Shirt with whatever, as long as it doesn't say "ultra". Dark blue Polar Fleece half-zip pullover, with Fractal logo. Blue or black ceramic coffee...
  97. raz

    MFC101 pics!!!

    GHS TM335's. Raz.
  98. raz

    MFC101 pics!!!

    Oh, hell...now I've REALLY got a bad case of midi-GAS. Crap! It can control both? Obviously I need to do some homework. I can't speak for the other Variax guitars, but the Acoustic 700 is a bloody miracle for live work. I've tried every transducer and preamp and processing trick in the book...
  99. raz

    MFC101 pics!!!

    Hadn't ever heard of the LG-M, so had to look it up. That's a very, very cool device. Crap, now I'm getting midi-GAS. Raz
  100. raz

    Re-organized amp models

    And reorganizing the cabs wasn't?
Back
Top Bottom