Search results for query: *

  1. S

    Routing for Axe Fx & KORG A3

    So I've got it sounding pretty good - and for anyone having difficulty with your outboard gear here is what i did: OUTPUT #2 (LEFT) on axe - goes to INPUT on the back of the KORG OUTPUT 1&2 ON KORG goes to INPUT 2 (L&R) on Axe -20 setting on KORG (as opposed to +4) KORG's input knob (on...
  2. S

    Routing for Axe Fx & KORG A3

    The reason that I am asking is that I can not seem to get the Korg A3 to sound good when inserting it in the Axe Fx loop. No matter where I put the loop in the signal chain it sound like a very choppy version of the effect. Lots of signal loss. however - If I run straight in from Guitar to Korg...
  3. S

    Routing for Axe Fx & KORG A3

    Wondering how people are running these 2 units together. The U2 people will know what I am talking about.
  4. S

    Anyone use this expression pedal with the Axe?

    As promised - here is a cleaned up version of how to set up this particular pedal with the switch and your Midi Mate/AxeFX. If you have not already watched the Midi Mate setup video by oddbod on YouTube - go watch it NOW http://www.youtube.com/watch?v=e_qXIFSN5hM This will set up your...
  5. S

    Cable for SP-1 Expression Pedal

    I'll take the 2 foot one. Send me an invoice through paypal.
  6. S

    Do we HAVE to program pedals patch by patch?

    :twisted: I got nothing for you. For once.
  7. S

    Anyone use this expression pedal with the Axe?

    I don't need any credit - I had three people helping me. 8-) I have gigs all weekend so I'll get to it by Sunday.
  8. S

    Anyone use this expression pedal with the Axe?

    Well I got both jacks on the left since one day I'll be ditching the Midi Mate and run both lines into a floor controller instead of one all the way back to the axe. Get the polarity switch because you never know what cables you have or how the Midi Mate will react... If it doesn't sound right...
  9. S

    Anyone use this expression pedal with the Axe?

    I go lean and mean - 1 EXP pedal is enough for me. I am sure the Hex works fine - I bought it new. I think I had the reverse polarity issue when running it into the Midi Mate. My main issue was auto engage cutting off the entire bottom 1/3 sweep of the pedal no matter what I did or where I put...
  10. S

    Anyone use this expression pedal with the Axe?

    That was it. EXTERNAL 1 was set to PEDAL 1 - so when I switched it to 10 - everything works perfectly now. Thank you very much. And you all should buy this pedal. Full sweep - just like a dunlop cry baby. Great for Whammy's and CC's on trem speed, delay etc... Now I can sell my Hex.
  11. S

    Anyone use this expression pedal with the Axe?

    So I received the pedal today and I am happy with it - great work - well put together- solid - THOUGH I do not know how to configure it properly with the midi mate and Axe. No matter how I set it up I get auto engage action and switch does nothing OR I get a switch on/off and no wah action -...
  12. S

    Anyone use this expression pedal with the Axe?

    No - I've got a Hex and a Roland Midi Controller - and they both lose the bottom of the pedal sweep to varying degrees running into the Midi Mate.
  13. S

    Anyone use this expression pedal with the Axe?

    I'm using it to turn on and off the Wah - or whatever it is programmed to be (CC) per patch. I can't get the full sweep of the pedal using auto-engage. the whole bottom part of the sweep is missing - it is basically half a pedal - hopefully the switch alleviates that. Also I like off to be off...
  14. S

    Anyone use this expression pedal with the Axe?

    Midi Mate for now - and yeah - I am aware that the stereo cable goes to the pedal input on the midi mate and I will run a regular mono cable back to the Axe FX for the switch. If we don't get an update on the MFC controller in the next week or so I'll probably have to buy a Liquid Foot because...
  15. S

    Anyone use this expression pedal with the Axe?

    I bought one and I'll let you know what I think when I receive it this week. I have high hopes - since I am using the Rocktron Hex controller and I have several issues with it - mainly that I like to turn stuff off with a toe down switch like a regular wah pedal and also I can not get used to...
  16. S

    Expression pedals with switch

    Hey lebihanj - Can I change my recent ebay order to get both jacks on the left as well? I didn't know it was an option.
  17. S

    Expression pedals with switch

    Just bought one on ebay with the reverse polarity switch add on. I am guessing that when the Fractal MFC controller comes out that I will just run 2 cables from the CC pedal into the 1 & 2 exp pedal input slots on the floorboard and that will work. Is the pedal labeled so I know which cord goes...
  18. S

    Expression pedals with switch

    So it would be 1 stereo trs cable to midi mate and then another stereo trs cable to the axe-fx pedal 1 input?
  19. S

    Expression pedals with switch

    I'll buy one today if you can get me one that works with just one cable into a midi floorboard (midi mate) instead of two running all the way back to the axe fx. You can PM me with details if you like.
  20. S

    Reversing Autoengage on Hex Wah Controller

    Excuse me for not being able to find this - but there was a post a while back on how to reverse the auto engage settings on a Hex wah style Controller - so that toe down was the OFF auto engage position as opposed to the heel down position being off. Can anyone remember and assist me in setting...
  21. S

    Custom Drive block

    Done deal. Thank you very much Cliff and Co. ;)
  22. S

    MFC101 pics!!!

    It really is a joke at this point. Way overdue and now it feels like we (ones who are on the wait list) are being neglected. There really is no excuse. Hire some help - get it done. There are plenty of techno-nerds out of work that could use the job designing and building floorboards for fractal.
  23. S

    MFC101 pics!!!

    You can't tune from the available floorboards. So it involves bending over to look at the display on the AXEFX rack unit display. Any activity requiring bending is highly discouraged.
  24. S

    Custom/ADVANCED DRIVE Block

    I would like to see a completely custom drive block that had at least the following parameters: 1. Drive/Clipping Types (assymetrical, symmetrtical, Fuzz, Germanium, 12AX7A pre amp tube style, opamp style, Rat style, 808, FET, SOD etc...) 2. Graphic EQ within the Drive Block - a three band...
  25. S

    Rocktron Hex and auto on/off

    I can not get my Hex to work right unless it is connected to the Axe - which is quite lame for keeping things simple at a gig. If it is connected to the pedal 1 out from my mid mate - there are the known issues - that apparently I need to re-solder the the stereo cable and invert the polarity...
  26. S

    KLON CENTAUR ---- Schematic now included!

    Here is a patch for you to get the KLON Centaur sound with everything at 12 O'Clock on the pedal: Put a Drive Block in front of a mildly clipping Amp model (FAS Crunch or similar) and here is a formula that sounds identical to the Klon when punched in and out to my ears: DRIVE BLOCK: Super...
  27. S

    KLON CENTAUR ---- Schematic now included!

    I have a Klon Centaur - so I will try and record some audio for y'all with the Klon running into the Axe to see if you like it and think it is different than what we already have. Got a gig tonight so check back tomorrow-ish.
  28. S

    Video Tutorial: Setting Up The Midi Mate With The Axe FX

    OK - you CAN assign #10 to the wah on the Midi Mate board - freeing up the number 9 button for something else. Just be sure the wah bypass is assigned to #10 on the axeFX and then have the wah set to autoengage. To store preset button assignments for each patch - you have to do it patch by...
  29. S

    Good WAH Setting request

    OK - I figured out that the brand new stereo cable to my wah pedal was bad! So now I have a new stereo cable and the wah sounds MUCH better and full. Even on the basic preset. Problem solved!
  30. S

    Video Tutorial: Setting Up The Midi Mate With The Axe FX

    Does the expression pedal have to be assigned to top row numbers (5 - 9) or is there a way to assign it to a number that never gets used and keep it on auto engage? Like assign it on the axe as #10 for instance? That way you don't have to waste a top row control button on an auto engaged effect.
  31. S

    Good WAH Setting request

    Thanks for the reply - I am using the Midi Mate with Rocktron Hex - trying to get in the ballpark of a throaty and full Teese RMC 3 wah sound (this pedal has variable settings and pots so that doesn't help much) - using Fender Strats, Tele's and Gibson Les Pauls. The Teese wah I have works...
  32. S

    Good WAH Setting request

    I can't seem to dial in a realistic wah - even using the formula from the WIKI. Anybody got a formula they want to share?
  33. S

    Old 80's Type Cover Band Tunes

    Sounds great - what is your wah formula/settings on MITB? I can't get my wah to sound half that good.
  34. S

    MFC101 pics!!!

    I am so used to the Midi Mate w/Hex controller now that it seems pointless to buy up for the MFC. I don't have Alzheimers yet so I don't need to see the names of the patches staring up at me. :D
  35. S

    Pedal / Feedback style Compressor

    SUSTAIN - between 5-6 RATE - 3.75 DETECT - PEAK Level- 0 Mix - 0 Run that at the top of a pedal chain but before your amp/cab block and tweak til groovy. :mrgreen:
  36. S

    Pedal / Feedback style Compressor

    Well I think it covers them all pretty well! Of course there is a lot of overlap in the pedal compressor product range - but so far the smack and funk of front ending a comp pedal into your amp is there - and the guitar and amp tone remains relatively unchanged (which comp pedals are notorious...
  37. S

    Pedal / Feedback style Compressor

    MISSION ACCOMPLISHED!!! :mrgreen: 6.0 RULES!
  38. S

    MFC101 pics!!!

    It means that they need to hire more help!!!! :evil: And they better believe they need to sell these things as fast as possible before the economy really tanks and they are stuck with 300 floorboards that no-one can afford. :lol:
  39. S

    Pedal / Feedback style Compressor

    Really want to have some pedal style squish and gush in the compressor department. The axe compressor is very neutral - almost too clean - and rack/studio like. Guitar pedal compressors IMHO tend to have a different feel, a different attack, some grit, and depending on the model, a sag or pump...
  40. S

    MFC101 pics!!!

    I just received word from cliff that the Tibetan Monks have just finished working the circuit boards and Sherpas are presently carrying them down Everest as we speak. So get your credit cards out. The magic floorboard that is between you and your record deal at Shrapnel is almost here.
  41. S

    MFC101 pics!!!

    I just bought the Rocktrom Midi Mate & Hex pedal - which so far is perfect - though the buttons themselves on the Midi Mate are a bit chintzy. I will still buy the MFC whenever it becomes available and keep the Midi Mate as a backup or for smaller gigs.
  42. S

    MFC101 pics!!!

    I just found this guys very useful tutorial videos which explain everything in detail. http://www.youtube.com/profile_videos?user=U2JustMe
  43. S

    MFC101 pics!!!

    Yeah - I wouldn't call it standard practice. Nothing about the Axe Fx is standard practice. But at least now I understand the foot controller power issue. And of course this solution only works if your foot controller comes with a wall wart type power connector. If it comes with an ordinary 3...
  44. S

    MFC101 pics!!!

    OK - I must be retarded. Or maybe I'm just used to the ease and functionality of Line 6 :shock: Explain why I need to plug ANYTHING but a 7 pin MIDI cable (which runs phantom power within it) from the various Ground Control Midi boards to the Axe FX? For Example - I had a Guitar Head...
  45. S

    MFC101 pics!!!

    Yeah - waiting for this foot controller blows. I am tempted to get the Voodoo labs Control board - but I know that as soon as I pull the trigger on it this MFC thing is going to be available and I am going to then buy it and be stuck with both. I'm just going to suck it up and wait it out. But...
  46. S

    MFC101 pics!!!

    The only thing keeping me from ditching my live amp is this floorboard.
  47. S

    MFC101 pics!!!

    Does anyone know how the unit will smell when it finally arrives and I open the box for the first time? I'm so damn excited about this unit - I want to try and replicate taking it out of the box with my eyes closed kind of thing. I really hope mine smells like a cheap Mexican whore. Maybe they...
  48. S

    MFC101 pics!!!

    Hey there Steve!! I'm lovin' the AxeFX! This is why I sold the Egnater Mod100 head - and now I'm trying to dump a 65 Amps Marquee 2x12 Combo. I really need to get a solid foot controller to put the Axe into use beyond the studio - and with the MFC101 supposedly coming out in the near future I...
  49. S

    MFC101 pics!!!

    My Brother of the AxeFX - I'm only fussy when the gig don't pay. Why then I believe I'm downright rude. 8-)
  50. S

    MFC101 pics!!!

    Yeah - I'm just not that picky. I've played on all kinds of midi boards and wah/volume types over the years with various setups and never had a "feel" issue with any of them. I just like the idea of plopping one floor unit down plugging it in with one cable and being done with it. Less crap to...
  51. S

    MFC101 pics!!!

    This thing should have a built in CC pedal. It is a no brainer.
Back
Top Bottom