Search results for query: *

  • Users: Joero6
  • Content: Threads
  • Order by date
  1. Joero6

    FS Sold

    Bought as a backup and never used. In original packaging. 60.00 Shipped in the UAS
  2. Joero6

    FX LOOP

    Not sure why, but my fx loop is no longer working. When I turn it on, it kills the signal. Is there a setting that might have caused this? Axe fx 2 xl+ is what I have and I run a cable from output 2l to unit and back to input 2l. Have done this in the past with no issues. Joe
  3. Joero6

    Output levels go to's and why?

    There has been a lot of discussions about setting levels and I would like to hear why you do what you do. I use the 2xl+ into a matrix GT100 poweramp which feed 2 4x12 cabs with 85watt celestions wired at 4 ohms. Now I want to know why you set levels the way you do. I have been setting my Matrix...
  4. Joero6

    Help me understand the grid

    Since I bought my Axe fx 2 I have always used it in a traditional manner. One line of the grid from input to output with 1 amp block and effects blocks. I was recently trying something new and split the signal so i had a "Y" from the input to 2 outputs. Not only was it louder, it felt a little...
  5. Joero6

    Instant Access LED use

    Currently using the Axe 2 XL+ in conjunction with the Original Rocktron Patchmate. This is controlled by the MFC 101 Mark 3. I use the Patchmate to control 4 external effects pedals in my rack. At the current moment when the IA's for the 4 external pedals are engaged, I get the green LED...
  6. Joero6

    Instant Access Help

    Currently using the Axe 2 XL+ in conjunction with the Original Rocktron Patchmate. This is controlled by the MFC 101 Mark 3. I use the Patchmate to control 4 external effects pedals in my rack. At the current moment when the IA's for the 4 external pedals are engaged, I get the green LED...
  7. Joero6

    Best way for FX Loop?

    I am using an Axe Fx 2 XL+ into a matrix power amp. I adjust my overall volume using output 1 of the Axe, while keeping output 2 on full. I keep both channels on the Matrix at about 2:00. I run a Rocktron Guitar Silencer noise gate in the FX loop. When I engage the noise gate through the loop, I...
  8. Joero6

    Need help with adding an external MIDI switcher

    I run the Axe2XL + with the MFC MK3. I want to control a Rocktron Patchmate. Currently the MK3 is set to have 1-5 as presets/scenes and 6-17 as IA switches. The goal is access the pedals controlled by the patchmate with IA switches. (Example IA 6 turns on and off Patchmate loop one with a noise...
  9. Joero6

    Popping noises during recording playbacks?

    I have my FX 2 XL+ running into my laptop via USB cable. The software I am using is Presonus Studio One 3. At the moment the Axe 2 is set as the soundcard. When I record any audio I get pops and crackles through the recorded audio in various spots. Any suggestions? Also on a side note, is...
  10. Joero6

    PreSonus Studio One 3 and the Axe-Fx 2

    Anybody using the Axe Fx 2 direct to PreSonus Studio One 3 for recording? I am brand new to this software and am finding that not only is the master volume extremely low, I have pops and cracks through the entire recording. I am using the Axe FX 2 XL+ running into my music laptop via usb cable...
  11. Joero6

    Tweaking the Dual Rec

    I just started playing with Recto2 red modern. I am running it stock with the T808 OD (stock) in front of it. I run an FX loop after the head controlling my Rocktron Guitar Silencer. Finally I use the2290 W/ mod as my delay. This feeds to my Matrix power amp into 2 4x12 cabs with 85 watt...
  12. Joero6

    Non-virtual cab setup

    Question for those running a power amp to traditional guitar cabs. Have you found any tricks or tips for getting the amp sounds closer to what they should sound like or sounding better when not using the cab blocks. I run my Axe 2 XL+ into 2 4X12 cabs with 85 watt celestions wired to 4 ohms. I...
  13. Joero6

    Needing Grid Help

    I understand the basics of the grid, but have a few questions. I have not seen a clear explination on this so I am asking here. Since getting my Axe 2 xl+ all of my presets I make have been on 1 grid line from input to output. After looking at others people have made using more than one path at...
  14. Joero6

    Controlling external pedals

    I am using the Axe Fx 2 XL+ with the MFC Mark 3 controller. I have one of the older Rocktron Patchmate loop switchers ( Black with Red buttons version) that I would like to use to switch in and out a few pedals I own. Is it possible to set up a few buttons on the MFC to be on/off switches for...
  15. Joero6

    FX Loop Question

    I have an external noise gate in the FX loop of my AXE FX. When I bring it into the signal path using the MFC, there is a slight increase in volume. If I bypass it using the fron panel, it stays the same. This tells me that the unit is adding a slight boost or gain to the signal path. Is there a...
  16. Joero6

    Splitting the signal to different effects

    I run my axe fx to a matrix power amp into two 4x12 cabs. I wanted to try creating a preset that splits the signal to two paths. What I would like to happen is this. Let's say I have just a stock sound that I am using as my dry sound.While playing,I would like to step on one of my expression...
  17. Joero6

    Another learning curve, this time with cabs.

    So I bought the Axe FX 2 XL+ just over a year ago. Like most people who made the jump from regular ams, there was a learning curve. I recently starting getting fairly comfy with making new presets, with only the most minor of issues...all of which have been solved by the great members of this...
  18. Joero6

    Problem installing the new 7 beta

    Anybody else get the error listed below? Went to install the new version tonight and it will not install. I am installing this the same way I have always done with no problems before. any ideas? An error has occurred during file transmission. This may have happened because you manually put...
  19. Joero6

    Expression Pedal Help On Downloaded Preset

    I recently downloaded a few user presets for fun and found a couple that I thought about using as a starting point for a few songs. In this particular preset, there is an expression pedal attached to the level on the synth block. The preset works great this way, however when I switch the...
  20. Joero6

    Lost preset

    Somehow, when moving presets around we lost power. The preset I was moving was the warped vinyl one. It is now gone since turning the Axe back on. Is there a way to just get that 1 preset back without having to reload an entire bank? Joe
  21. Joero6

    Anyone else using 4 Expression pedals? Need a little help.

    New Axe fx 2 XL -MFC Mk3 user trying to get this thing set up the way I want. So far I have 2 pedals working the way I want. Port 1 on the MFC has a Dunlop DVP3 acting as a volume only pedal. Port 2 has a Mission SP1 for a wah only. The Sp1 also uses the Switch 1+2 port so I can use the toe...
  22. Joero6

    XLR Cable

    Is there a length on the xlr cables that is too long for use between an Axe fx 2 xl and the mfc Mk3? Will up to 100 ft be ok without any lag or issues? Thanks Joe
  23. Joero6

    Making a switch hold?

    I have my MFC set up with buttons 1-5 as presets & 6-17 as IA's. Is it possible to have the MFC hold a switch while scrolling through the up/down menu? In other words, .......If I am on preset 5, and i want to bank up to the next bank and hit preset 7, is there a way to not have the mfc change...
  24. Joero6

    Problem using the Mission SP1-R

    I have this hooked up to the MFC in the EXP 2 slot, and the1+2 switch inputs. I am using the pedal like a tyraditional Wah pedal with the switch turning the effect on and off. Everything works fine except the led is on when the pedal is off and off when it is engaged. Anybody else run into this...
  25. Joero6

    Programming new presets to preset numbers

    I have my MFC set up with 1-5 as presets and 6-17 as IA switches. I know how to change the IA switches using my MFC if I want to switch the out or around on the board. How do I switch the presets? Example: If i want to hit preset button 4 and have it bring up preset number 122. The only way I...
  26. Joero6

    Name Timeout error on new Mk3

    I have a new XL+ that I bought about 5 months ago. Just bought a brand new MK3 and am trying to connect the two together. I have been up and down through the forum as well as the manual, quick start guide and you tube videos with no luck. Currently running a xlr cable from the faslink port (mfc)...
  27. Joero6

    Why no Effects Forum?

    We have so many different options in the Forum such as Axe Fx, Cabs, Controllers, Routing, and even Off Topic and For Sale/Wanted. When it comes to effects, they seem to be scattered all over the place. Now before somebody says we have a forum for patches, yes...yes we do. However, those seem to...
  28. Joero6

    Question about using the front panel output knobs.

    Running the Axe fx2 Xl+ Into a Matrix GT1000fx, With an external noise gate in the FX Loop. The Matrix runs to a pair of 4x12 Cabs. I have been running the level of both output knobs at 100%, and controlling my master volume with the matrix. (after any input and output changes inside the axe...
  29. Joero6

    X/Y and the FX Loop

    When you are using the X/Y function to switch between 2 versions of an amp, is it possible to use one with the FX loop and one without? Was hoping to set up a heavy tone, and X/Y the loop with my external gate in and out of the signal. Joe
  30. Joero6

    Questions about setting up effects and tones.

    I have a few noob questions that I need answers to so that I can wrap my head around how to program my AXE2Xl+ to suit my needs best. 1. If I am using an external piece of gear in the FX loop ( in this case it's a noise gate), and I want to use that for my super High gain sound for example. Is...
  31. Joero6

    Expression Pedal

    Tonight I hooked up my 1st expression pedal to work as a whammy. Not for a song or anything, just to see how it worked and sounded. I used the input 1 on the back of the Axe, because when I bought mine new 3 weeks ago they were out of stock on the MFC 101. I don't want to do too much...
  32. Joero6

    FX Loop Question

    I tried to use the FX Loop for the 1st time today on the AXE 2 XL+. I placed the FX Loop in my signal chain, between an amp and cab block to try and use my external noise gate. The cables then ran like this. From output 2 L to input of gate, from output of hate to Input 2 L of Axe. Didn't...
  33. Joero6

    What Order?

    When using Axe-edit, what order do you power on? Does it make a difference? I have been having some connect issues and was wondering if I did something wrong to cause it. Do i open the edit on my laptop 1st and then turn on the Axe, or the other way. And which order to disconnect? Sorry for the...
  34. Joero6

    Patch removal

    If I download a patch with the fractal bot, and find that I don't like it or have a use for it can I delete it directly from the Axe or does it have to be done through the computer? I can't get my Axe edit to work yet so I am kind of stuck. LOL Joe
  35. Joero6

    How to use effects?

    So I am wanting to use the MFC 101 to control the AXE 2 XL+. I was thinking about using the 1-5 switches for preset tones. Clean,Dirty,Heavy,Etc. Thean I wanted to use 6-17 as dedicated effects to punch in and out. When you use it this way, do you have to make patches with the amp tones AND the...
  36. Joero6

    Still learning

    So I have the Axe Fx 2 xl+ running to a Matrix GT1000Fx Amp. From there it goes to 2 4x12 Cabinets wired to 4 ohms each which use 85 watt Celestions. I went into global and bypassed the amp and cab. Now, knowing there are sometimes no rules here is question one. Would the above setup be...
  37. Joero6

    Extreme noise gate

    So I got my Axe 2 Xl+ yesterday, and tried it out for the first time. Started using the Citrus and got a tone I was fairly happy with. The problem I am having is figuring out how to make the noise gate work properly. On my standard rig which I am trying to replicate and replace I use one of the...
  38. Joero6

    Your rack

    My Axe Fx 2 Xl + arrives tomorrow and I have been looking at different rack options. I was curious how deep you guys went and why? I am ordering a shock mount rack with rear rails and was thinking 20 inch. Any adviceor problems with this? Thanks Joe
  39. Joero6

    Mission pedal adjustment

    Anyone know offhand what size the hex key is for adjusting the mission tension? Don't have the one that came with it handy. Thanks Joe
  40. Joero6

    On the way, but...

    I have an Axe Fx 2 XL + on the way, and have been trying to get things ready for the arrival. They were out of the MFC controller when I ordered so I am not worried about connecting that. However, does the Axe ship with the usb cable to connect for Axe Edit? If not, which one do I need to buy...
  41. Joero6

    New to Axe and Matrix

    So I just bought a Matrix CT1000Fx 2 space power amp and the Axe Fx 2 Xl +. They are being shipped this week. I wanted to know from people who use this combination if you have compared the different options cable wise between the Axe and Matrix. Is there any difference in tone, and why would you...
  42. Joero6

    Expression and effects question

    I have seen many posts where people control the speed of effects with an expression pedal. I was wondering if you were able to set limits on the effects. For example Delay. If I wanted to set the delay to be a certain speed heel down and raise to a certain tempo toe forward, is that possible...
  43. Joero6

    Still on the waiting list, but...

    I went ahead and ordered my Matrix GT1000FX this morning. Decided to get that out of the way as well as a new rack while I wait. The wait, however is killing me. Joe
  44. Joero6

    External Tuner

    Is anybody running an external tuner in their rack, and if so what output are you using? I would like to run a direct line to my ext tuner so it gets constant signal. Thanks Joe
  45. Joero6

    What is the Size?

    This may be posted somewhere, but I have not found it yet. What are the demensions for the 101 Mk 3? Thanks Joe
  46. Joero6

    Expression Pedal Question

    I am currently on the waitlist for the Axe FX 2 XL +. Planning on using 4 expression pedals for the following. 1. volume only. 2. Wah only. 3. Whammy only. & 4. Various things like changing the speed of effects,etc. Here is my question. When doing a setup like this, do I need a dedicated button...
  47. Joero6

    Mission expression pedals and Wah

    I was wanting to set up My Axe Fx 2 to operate like my previous stage setup. In doing this, I was hoping to use 4 exp pedals. Volume, wah, whammy, and a various expression. While searching for a pedal to use as a Wah, I came across the Mission sp-1. I like the aspect of having it function just...
  48. Joero6

    The Waitlist

    Just got on the Waitlist tonight for the Axe Fx II XL+. Wouldn't you know it would be out of stock when I decide to get it. LOL Oh well, looking forward to giving it a shot and seeing what happens. Joe
  49. Joero6

    Matrix GT1000FX 2 Different versions?

    I was thinking of buying a Matrix GT1000FX for use with the Axe fx II Xl. While looking at them, I noticed that there were both 1 and 2 space versions. Couldn't find any info on the differences. Anybody know, or has anybody compared the two? Which seems better, not worried about saving space as...
  50. Joero6

    Anybody using the Dunlop DVP3's?

    Just curious as to how well they work with the Axe units. I currently use them with my Rocktron All Access controller with my rack gear and love them. However, I know that not all pieces of gear get along all the time. Joe
  51. Joero6

    Faslink with XL+?

    Sorry if this has been covered before, but if it has I have not seen it. I am getting ready to buy the Axe Fx XL+ and the MFC 101 Mark 3. Will I also need one of the Faslink adapters to connect these together, or is that used for the older units? I just wanted to check so I can order everything...
  52. Joero6

    Replacing existing gear with the Axe Fx 2

    I am currently on the waiting list for my Axe Fx 2 XL and MFC combo. I have been going through my current gear, and seeing how much of it I won't need once I make the switch. I have done lot's of research on tones for both clean as well as distortion and am convinced I can get the sound of my...
  53. Joero6

    Using My Wireless With An FX II XL

    I use the original XWIRE X-905 Wireless System. The output is a 1/4 jack located on the back of the unit. Facing the back it is on the right side. When connecting this to the Axe FX, does it need to be routed to the front input...or can the rear input be used? If both are options, does one...
Back
Top Bottom