Search results for query: *

  1. Loopback777

    Yahtzee! Tone matching defintely works in 10.05

    I've had success with this before, but not to this degree. Just tried it on 10.02. Not so good (as to be expected - I know). Updated to 10.05 and tried it. If I had a clue and the inclination to figure out soundcloud I'd record and play the two tones - it's a sweet Black Crowes sound (twice...
  2. Loopback777

    Updating existing presets with v10

    Later on today (around 5pm EST, aka the end of the day ;)) when I download v10, I'd like to try to keep my presets intact as an experiment. When there have been big FW updates in the past, I've usually rebuilt things from the ground up. But this time, I'd like to see how things change "as is"...
  3. Loopback777

    Front panel question

    How do I load a 2nd, 3rd or 4th instance of a block if I don't have any other instance of that same block in a preset from the front panel? I use Filter 4 for my boost, but can't seem to figure out how to add it. Thanks!
  4. Loopback777

    Preset question

    Can I change the setup of the MFC so that I still have 5 presets per bank but they are on the 3rd row (11-15)?
  5. Loopback777

    Routing question

    I have a crunch tone on the 2nd row and a clean tone on the 3rd. I'm using a mixing block at the end of row 2 set up with a pedal to switch between the rows. I'd like to use the same chorus (Chorus 1) for both rows. I'm having trouble figuring where to put it. Any help would be much appreciated.
  6. Loopback777

    Mixer Block question

    I'm using the Mixer Block tied to a pedal to change between a crunch and clean tone, but I've noticed on the clean tone (when I'm on my own without the band and things are quiet - or on recording playback) that I can just barely make out the crunch. I've recalibrated the pedal. How can I clean...
  7. Loopback777

    A Little Late to the Party

    Thank you, Cliff. I couldn't get the tone of an original I did a few years ago, recorded with a different guitar, through completely different equipment, until now. I've only had enough time to play these past few months, not tweak. I'm a little late to the tone match party. It is as easy...
  8. Loopback777

    MFC-101 button stopped working after Axe Edit update?

    I realize that this is a question about 2 things that ARE NOT the Axe FX 2, but I put this post here in case there's a relation to the new FW (and because more people are looking here now, so if someone else is having this issue, they'll be more likely to see this). I've been using the MFC...
  9. Loopback777

    MFC and External Pedal Tuner?

    I have a strobe pedal tuner that I really like. Is it possible to incorporate it into the MFC? I know there's no audio going through, so I doubt it, but I thought I'd ask. I run wirelessly through a L6 G90. My next question would be, if it's not possible, are there any suggestions on how...
  10. Loopback777

    Presence Knob Reverses EQ

    This is weird. So far I've only found it on this one preset. When the Presence is on 0.00, it's maxed out. When I turn the knob to 10.0, it goes away. Try it! It's fun!
  11. Loopback777

    Anyway to customize Auto-Engage speeds?

    I'd like 500ms instead of 333ms for Medium. Is there any way to customize this?
  12. Loopback777

    Recording Wet & Dry - A way to increase dry gain?

    I'm recording wet and dry signals, but the gain on the dry signal is really low. Is there a way to only increase this at the Axe? At unity, the dry track only reaches -24 and the wet -5.3.
  13. Loopback777

    Mission SP-1 Design Flaw - Any suggestions?

    I have 2 Mission SP-1 pedals. There's a tension hex screw at the back to tighten the pedal in the heel position. One of my pedals needs to be tightened because if I shift it to the heel position, it will drift to the toe. Unfortunately, I don't still have the hex screw provided with the...
  14. Loopback777

    Reverse Delay Question

    I couldn't find this in Yek's stuff and I can't remember how I did it in the Ultra. How do I set the Reverse Delay so that only the delay is heard (not the signal that starts it)? Thanks.
  15. Loopback777

    I'm sure I'm doing something wrong but... CC# and Pedal Question

    I have Ext Ctrl 3 on 18. I have a pedal attached to MFC mapped to CC#18. I calibrated the pedal and have it set to BegPDL. On a preset I'm using a mixer to switch between channel 2 and channel 3 with the pedal. When I move the pedal (and the graph edit view is showing on the AF2), the ball...
  16. Loopback777

    Scratchy Wah

    I'm getting a faint scratchy sound on the wah. I'm using a Mission pedal and the MFC. I tried switching pedals and cables. I'm no where near clipping. Anyone experience this? I'm not sure how to load the file on here or I would.
  17. Loopback777

    Is there any way to do this?

    I have 2 presests with 2 amp and 2 cab blocks (each). I'd like to be able to use an expression pedal to gradually go from one to the other (mixing their tones).
  18. Loopback777

    X/Y Question

    Any reason why I press "Y" in an Amp block (going from Plexi Normal to 59 Bassguy) and everything is grayed out and uneditable (on Axe Edit)?
  19. Loopback777

    Problem with Modifiers - Anyone have this?

    I have a modifier set on a Vol block set to Start at 65% and End at 100% (the mid draws a straight line). Everything else is connected and working correctly. The expression pedal turns the Vol off at the heel position, not at 65% level. I've programmed this from the Axe, so it's not another...
  20. Loopback777

    Whammy trouble?

    I'm using a Mission expression pedal and an MFC. I've created a patch with whammy. I attach the controller for the pedal to the control parameter and get nothing. The effect is on and I can see the point on the graph move on the AF2, so I know it's working, but no control. Everything else...
  21. Loopback777

    Mission Pedal and IA Light

    I found where this was asked (but not answered) regarding the Liquidfoot, but couldn't find this for the MFC. I have a switching Mission pedal. I'd like an IA light to go green/red with it on/off (controlled from the pedal switch). I've searched Yek's and I've searched the forum. I've...
  22. Loopback777

    Control Volume Minimums and Maximums with a Pedal

    I'm using an MFC-101 and have a couple of Mission pedals. I'd like to be able to set up volume minimums within a preset using a Volume block and a controller. I don't want to have to set pedal minimums and maximums on the MFC, because I want to be able to move the presets around in the...
  23. Loopback777

    Volume Minimums & Maximums

    I can't seem to find out how to set a volume minimum. I'm using the MFC-101 with a couple of Mission pedals. I know that the Axe FX assigns CC 10 for volume. CC 16 is External 1. How do I set a minimum for the volume pedal? If I don't assign a controller and place a Vol/Pan in the chain and...
  24. Loopback777

    Turn one effect on and another off at the same time?

    Is it possible to have 2 effects (blocks) in opposite states (on/off) so that if I press either one of them the relationship reverses, but only on one individual preset? I can see how to do it with a Global Switch Link set, but I don't want it to effect any other presets and I don't want to...
  25. Loopback777

    Please help with my Wah - newbie question.

    I can't make my pedal control the wah. Please help. Here's what I have: Mission SP-1 plugged with TRS cables (switch to switches 1+2 and XP to the MFC's XP-2). On the loaded preset, I have the wah by-passed. The switch (set to CC# 097) is working to by-pass/un by-pass the wah. I left the...
  26. Loopback777

    MIDI Controller and Computer Connection

    Sorry, I'm new (to Fractal Audio and MIDI) and searched for this, but couldn't find it. Do I need a seperate interface (splitter) in order to be able to connect my computer and midi footswitch to the AFX at the same time? I understand that the MFC-101 (should arrive tomorrow) only needs one...
Back
Top Bottom