Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

[AlGrenadine]

Where do I set that? Here are the app permissions. View attachment 160405

I don't know, this is a Samsung specificity... That's why i always recommend to avoid Samsung at all means

 

[Ledvedder]

Also, I don't see any firmware downloads for the Yamaha MD-BT01.

 

[AlGrenadine]

Also, I don't see any firmware downloads for the Yamaha MD-BT01.

It's not a download, you have to use the yamaha ud md utility, only available on ios

 

[Ledvedder]

From reading up on the coarse|fine location access warning in the FracPad log, it seems like the app needs to prompt to allow "precise" location, but it doesn't. I'm not sure if that can even be declared in the app config. Sorry if I'm interpreting this wrong but I'm just going back to my IT days. https://developer.android.com/devel...ation/permissions/runtime#approximate-request

 

[Ledvedder]

Here's some more good information. https://stackoverflow.com/questions...can-or-discover-bt-and-ble-devices-in-android

https://developer.android.com/training/permissions/requesting#java

 

[AlGrenadine]

Here's some more good information. https://stackoverflow.com/questions...can-or-discover-bt-and-ble-devices-in-android

https://developer.android.com/training/permissions/requesting#java

Ok strange to request gps location just to access Bluetooth local devices
And why is it only needed on Samsung?

 

[AlGrenadine]

Yes, I have Bluetooth enabled. I haven't renamed the MD-BT01. Here's what's showing in the log. View attachment 160403

Can you contact me in private, so i can send you a private build adding this permission?

 

[AlGrenadine]

FracPad 3.53.2 has been released on Android only :
- If you experienced difficulties accessing bluetooth midi dongles in the past, it should be fixed

 

[Ledvedder]

I'm wondering if there is anyone in this forum who has successfully connected a Samsung Galaxy (phone or tablet). I'm using a Yamaha MD-BT01 on my FM3. An iPad connects fine. But when I try to connect with my Galaxy S25+ phone or my A9+ I have issues. Sometimes I can send a few commands, sometimes I can't do anything. And the app always ends up crashing. There's obviously some sort of communication issue with the Samsung bluetooth, according to what I can see in the log file. I've ruled out any issues with the MD-BT01, since the iPad works fine. I've attached the log file, in case anyone would be willing to help troubleshoot. Thanks!

 

[Norminski]

FracPad 3.53.2 has been released on Android only :
- If you experienced difficulties accessing bluetooth midi dongles in the past, it should be fixed

Thanks man! Everything is running perfectly now!
Connection on FM3 with OnePlus and M-VAVE. I'll test FXIII in the next few days

Edit: FXIII running also fine

 

[Ledvedder]

Has anyone using Android had success with a different Bluetooth midi device besides the Yamaha MD-BT01?

 

[Ledvedder]

Would any of these Bluetooth options for my Galaxy S25 by helpful to modify?

 

[AlGrenadine]

Would any of these Bluetooth options for my Galaxy S25 by helpful to modify? View attachment 160666View attachment 160667View attachment 160668

No, these are for audio bt

 

[Home Skillet]

Would this be possible? Export a preset via FracPad and save it on the iPad and then import the preset on another device via FracPad.

 

[AlGrenadine]

Would this be possible? Export a preset via FracPad and save it on the iPad and then import the preset on another device via FracPad.

Yes of course, if you find an iPad file manager allowing you to send the syx file to the other iPad

 

[steff8]

Whish - or maybe I just do not know how to do it.

Foreword: I also use FracPad as a replacement for “Large Font” on the AxeFxIII and "Display for the Nektar Pacer" (Nectar Pacer foot controller via MIDI cable to AxeFxIII; old iPad via USB cable connected to the AxeFxIII, FracPad running on iPad displaying what is happening on the AxeFxIII). The performance screen already works somewhat fine, but the custom screen would be even better for me if I could change the font size of some entries. I am using Preset Number, Preset Name, Scene Number, Scene Name and they scale not favourable (for me).
1. Can I somehow "fine tune" the font size of the fields I am using in the custom page of Fracpad (besides changing the size of the field)?
2. Is it possible to get a certain range of the preset list on the custom screen? Sometimes it would be helpful to see where to jump to next.

Nevertheless, great to have this possibility via Fracpad! Thanks!

 

[steff8]

Whish - or maybe I just do not know how to do it.

Foreword: I also use FracPad as a replacement for “Large Font” on the AxeFxIII and "Display for the Nektar Pacer" (Nectar Pacer foot controller via MIDI cable to AxeFxIII; old iPad via USB cable connected to the AxeFxIII, FracPad running on iPad displaying what is happening on the AxeFxIII). The performance screen already works somewhat fine, but the custom screen would be even better for me if I could change the font size of some entries. I am using Preset Number, Preset Name, Scene Number, Scene Name and they scale not favourable (for me).
1. Can I somehow "fine tune" the font size of the fields I am using in the custom page of Fracpad (besides changing the size of the field)?
2. Is it possible to get a certain range of the preset list on the custom screen? Sometimes it would be helpful to see where to jump to next.

Nevertheless, great to have this possibility via Fracpad! Thanks!

 

[seb42]

Hello everyone, I wanted to know if Fracpad has a Scene Manager tab similar to the one in FM9Edit. I have the demo version but I can't find it. Thank you.

 

[AlGrenadine]

Hello everyone, I wanted to know if Fracpad has a Scene Manager tab similar to the one in FM9Edit. I have the demo version but I can't find it. Thank you.

Hi, no it doesn't

 

[seb42]

Hi, no it doesn't

Ah, okay, that's a real shame. Thank you.