Rex
Dignified but Approachable
Good question. I know I've read this information specifically within the last three days, but I'm having trouble locating it.Could you possibly show me exactly where in the manual, I can't find it.
Good question. I know I've read this information specifically within the last three days, but I'm having trouble locating it.Could you possibly show me exactly where in the manual, I can't find it.
Check this out mite be what your looking forCould you possibly show me exactly where in the manual, I can't find it.
The issue was visual tracking of the pedal during calibration. The actual calibration itself always worked well.Using EV1 on FC6, this firmware dind´t solve the calibration problem to me, am i missing something? Whammy is impossible to use for now...
The issue was visual tracking of the pedal during calibration. The actual calibration itself always worked well.
Can you tell us what the Whammy is doing when you try to use it, and what happens for you during calibration?
Calibration on whatever device is giving you the problem. When you attach the pedal to your FC-6, do you then calibrate it?Calibration on FC6 itself or on AxeFx III?
Is possible that i am missing something but i have 2 EV1, with both happens the same problem, BUT when i plug direct on AXE-FX III the problem
yes i missed this point, now is working! Cheers!Calibration on whatever device is giving you the problem. When you attach the pedal to your FC-6, do you then calibrate it?
Nice! I'm glad you got it worked out.yes i missed this point, now is working! Cheers!
I have the same problem. The pedal is plugged to the FC-12. After calibration my whammy doesnt reach the last semitone. I’m on FW 1.09. How did you solve it?Thanks for the assistance Rex! Well when i go all the way UP does not reach the end, on any whammy, instead of get an 8 UP i got a 7 interval, really weird.
Calibration on FC6 itself or on AxeFx III?
Is possible that i am missing something but i have 2 EV1, with both happens the same problem, BUT when i plug direct on AXE-FX III the problem disappear.
Are you calibrating in the FC menu?I have the same problem. The pedal is plugged to the FC-12. After calibration my whammy doesnt reach the last semitone. I’m on FW 1.09. How did you solve it?
I calibrate under Setup/FC Controllers/Remote as indicated in the manualAre you calibrating in the FC menu?
Just to make sure it's saving properly, do you mind running a quick test? In the same menu (Setup/FC Controllers/Remote), turn the FC Global Brightness down to 0% and power cycle the FC. The back light on the mini-LCDs as well as the ring LEDs should be remain off when it powers back on. You can restore it to your previous setting after trying this. Thanks!I calibrate under Setup/FC Controllers/Remote as indicated in the manual
Yes that works i.e. the settings are saved! What can I do?Just to make sure it's saving properly, do you mind running a quick test? In the same menu (Setup/FC Controllers/Remote), turn the FC Global Brightness down to 0% and power cycle the FC. The back light on the mini-LCDs as well as the ring LEDs should be remain off when it powers back on. You can restore it to your previous setting after trying this. Thanks!
I was hoping it was going to be that simple. That's the only idea I had off the top of my head. If I think of something else I'll get back to you. I'm sure you have, but I would try calibrating it a couple more times.Yes that works i.e. the settings are saved! What can I do?
When I increase the Scale in the Modifier a little bit from 1.000 to 1.022 I get the missing bit for the full octave. But I guess that’s not the way it is supposed to be...I was hoping it was going to be that simple. That's the only idea I had off the top of my head. If I think of something else I'll get back to you. I'm sure you have, but I would try calibrating it a couple more times.
That's a perfectly acceptable way to do it and one of the reasons the Scale parameter is there.When I increase the Scale in the Modifier a little bit from 1.000 to 1.022 I get the missing bit for the full octave. But I guess that’s not the way it is supposed to be...
No. Mission EP1...@Ernie Echo what is the pedal? FV500H by any chance?
When calibrating, push to a position slightly shy of full toe down before starting calibration then move once to heal pos.No. Mission EP1...