New FC firmware will be released soon to fix that.I've also got it happening with a Mission Control EP-1 into my FC6. 0%-99.2% (Yes, it's calibrated).
New FC firmware will be released soon to fix that.I've also got it happening with a Mission Control EP-1 into my FC6. 0%-99.2% (Yes, it's calibrated).
What expression pedal?Will this also work for the lower range? I have the same issue plugging an expression pedal into my FC12, and it goes from like 0.2 to 9.6 instead of 0-10. So with heel all the way down there is still some sound, although almost inaudible. More noticeable live.
I have this issue plugging expression straight into my FC12.
Didn't see a fix on 12.06 Beta 3...
Right now I'm temporarily using an Ernie Ball VP Jr. with a Y-cable.What expression pedal?
New FC firmware will be released soon to fix that.
That's an issue with your MIDI controller. We have not control over pedal calibration in 3rd-party devices.
@Megahertzz - I confirmed that using an expression pedal works via MIDI correctly a build or two ago. You probably need to calibrate your pedals on your RJM gizmo.
Did you install 12.06 official FW first?Pedals have been calibrated several times, still ends up at 99.2%, although sometimes it stays at 99.2 a few seconds and then goes to 100. I'll try an earlier firmware and see if that helps. I'm still 99.2 % sure the midi controller is not the issue.
Yes. Rolled back to fw11, no change. back at 12.06 now. I posted the same problem at the RJM forum, but haven't gotten any concrete solution yet.Did you install 12.06 official FW first?
Pedals have been calibrated several times, still ends up at 99.2%, although sometimes it stays at 99.2 a few seconds and then goes to 100. I'll try an earlier firmware and see if that helps. I'm still 99.2 % sure the midi controller is not the issue.
Connect your RJM to your computer via MIDI and see what value is getting transmitted. If it doesn't go 0-127, then it's not sending the full range.I use Pocket MIDI to monitor on Windows. They make a Mac version as well.
https://www.morson.jp/pocketmidi-webpage/
I will test MIDI again to verify the Axe-Fx III (and FM3) are responding to MIDI right.
Are you using TRS cables and not instrument cables? How far do the pedals go?I have two Mission Pedals and have calibrated them both but they are still not working correctly. I have the latest firmware 12.06 and latest Axe Edit. Any idea what I can do to get them working correctly? I am using one as a volume pedal and it won't go all the way up.
Yes, I'm using TRS cables and they are short cables(1 foot, 1 1/2 foot)Are you using TRS cables and not instrument cables? How far do the pedals go?
I meant how far is the pedal moving the parameters in the axe, as you said it doesn’t go all the way up.Yes, I'm using TRS cables and they are short cables(1 foot, 1 1/2 foot)
hmm, that's exactly the problem Calibration should solve.Is there a fix for this? I have tried over and over to recalibrate my pedal and as you can see it says 100% but it is more like 95%View attachment 66080