Actually you don't even need a second amp. I just inserted this into a new blank preset, IN1, AMP1, OUT1 (all through front panel). Select USA clean. Set Level to 0dB (this is not important but allows you to hear the artifact). Set Presence below 1.0 - you'll hear like a sort of tremolo chirping that changes frequency as you decrease below 1.0
Did you follow the included instructions and load the default FC-6 layouts?I am getting serious problems with the FC-6 not loading presets, sometimes they load , sometimes they don't, there are some spots, that never load and the screen gets blank, I have to access through the axe edit tp a new preset spot.....
But they DO sound like 'real' amps. You're wanting a different sound than the Axe provides at this point. The fact remains that the amp models in the Axe sound like their real amp counterparts using a specific configuration (mic'd cab).Cliffs, i appreciate you saying this. I think from now on people should say that TO THEM it sounds like real amps not that it DOES.
To me it still dosn't but when i say it here people say to me, well this is your opinion.
But it is not an opinion hearing a difference, So It is subjected to hearing details, but it is not a Subjective judgment.
I think it is getting closer all the time, amazingly so, but nothing can be like something else, merely because it is not. But that's also what makes the AxeFx what it is, no amp can nearly do what the Axe does!
I am a daily loving user of the AxeFx and i am grateful to you for being at peace enough to say your evolving, It is at the benefit of all of us and it is an incredible amazing box already, Thanks for the pursuit!
I think I erased the default layouts, and created my own, maybe that was the issueDid you follow the included instructions and load the default FC-6 layouts?
What layout are you using?
What is your bank size setting?
What version of FC firmware are you using?
Have you tried a different XLR cable?
Welcome to the Fractal club. They only get better.
I think it is getting closer all the time, amazingly so, but nothing can be like something else, merely because it is not.
how can I copy my layouts to other presets or all presets?
Using a spectrum analyzer, the following is a list of other amps that exhibit spikes in the frequency spectrum when Presence is set to 0. Depending on their location and level (and you're hearing ability) these spikes may or may not be audible to you.
Spike @ 16.9 KHz
5153 50W Blue
Spike @ 3.3 KHz
5153 100W Blue
5153 100W Green
5153 100W Red
Spike @ 8.1 KHz
USA IIC+
USA IIC+ Bright
USA IIC+ Deep
USA IIC+ Deep Bright
Spike @ 14.8 KHz
USA Lead
USA Lead Bright
USA Lead Mid Gain
USA Lead Mid Gain Bright
Spike @ 6.2 KHz
USA Pre Clean
Spike @ 11.9 KHz
USA Pre LD1 Red
Spike at 15 KHz
USA Pre LD2 Yellow
USA Pre LD2 Red
USA Pre LD2 Green
USA Pre LD2 Yellow
Oscillating Spike @ 13.4 KHz
FAS Skull Crusher
PVH 6160 Block
PVH 6160+ Lead
Spike @ 9 KHz
PVH 6160+ Rhythm
PVH 6160+ Rhythm
Wow. I guess that was lots of work.
Did you go trough all of the amps and these are the only ones that show the issue? Or are these the ones that you usually take?
I checked every model.
Already fixed.
Commendable effort & work my man.. thank you.I checked every model.
Thanks for this. I'm pretty sure I know what this is and will be an easy fix. For now don't turn the presence that low.Using a spectrum analyzer, the following is a list of other amps that exhibit spikes in the frequency spectrum when Presence is set to 0. Depending on their location and level (and you're hearing ability) these spikes may or may not be audible to you.
Spike @ 16.9 KHz
5153 50W Blue
Spike @ 3.3 KHz
5153 100W Blue
5153 100W Green
5153 100W Red
Spike @ 8.1 KHz
USA IIC+
USA IIC+ Bright
USA IIC+ Deep
USA IIC+ Deep Bright
Spike @ 14.8 KHz
USA Lead
USA Lead Bright
USA Lead Mid Gain
USA Lead Mid Gain Bright
Spike @ 6.2 KHz
USA Pre Clean
Spike @ 11.9 KHz
USA Pre LD1 Red
Spike at 15 KHz
USA Pre LD2 Yellow
USA Pre LD2 Red
USA Pre LD2 Green
USA Pre LD2 Yellow
Oscillating Spike @ 13.4 KHz
FAS Skull Crusher
PVH 6160 Block
PVH 6160+ Lead
Spike @ 9 KHz
PVH 6160+ Rhythm
PVH 6160+ Rhythm
Completely new Amp block cathode follower algorithm yielding more accurate results.