GeeJee
Inspired
Works great in my "Scenes-layout" but isn't working in my "Per-Preset layout". Settings are the same. Is this a known bug?FC: Fix Tuner not exiting when tapping a Stand-In Switch whose Hold function is Tuner.
Works great in my "Scenes-layout" but isn't working in my "Per-Preset layout". Settings are the same. Is this a known bug?FC: Fix Tuner not exiting when tapping a Stand-In Switch whose Hold function is Tuner.
Works great here. I'll try get a video done tomorrow going through some of the features. In the mean time the Triple Crest inspired some riffage today.
Nope.Ok.. so I'm currently on 12.03 and FC-12 FW 1.10..
Any odd steps I need to take, other then backing everything up.. in order to get to the latest and greatest?
Update Axe-Edit too if you haven't already. Not sure if that's required with 12.06, but it's the right thing.Nope.
Backup
Update
Enjoy![]()
IIRC there is a firmware update for the FC as well: 1.11.Update Axe-Edit too if you haven't already. Not sure if that's required with 12.06, but it's the right thing.
This is the way.Nope.
Backup
Update
Enjoy![]()
You're right of course, but since he mentioned his FC version, I figured he was on that case already.IIRC there is a firmware update for the FC as well: 1.11.
Thanks for the tip SpideyWorks fine for me using speed.
How do you have the Off Value set? I have mine set at 95% so when I put the pedal full up and let it rest it turns off. Then when I switch back to the scene where my expression pedal controls the volume block I'm at full volume.
So maybe I am mis-reading the directions: I thought POS was triggered with the OFF setting (manual pg 141). SPD is supposed to engage when pedal is moved, not based on position - correct? Like, if on SPD my WAH does bypass when pedal is down, but remains on when I move pedal to say 50% and then leave it at rest... but I would like it to turn off at 50% when at restWorks fine for me using speed.
How do you have the Off Value set? I have mine set at 95% so when I put the pedal full up and let it rest it turns off. Then when I switch back to the scene where my expression pedal controls the volume block I'm at full volume.
Speed type just requires a “rush” of motion. It was developed so if your pedal is physically creeping down when not touching it, it wouldn’t engage once it passes the threshold.So maybe I am mis-reading the directions: I thought POS was triggered with the OFF setting (manual pg 141). SPD is supposed to engage when pedal is moved, not based on position - correct? Like, if on SPD my WAH does bypass when pedal is down, but remains on when I move pedal to say 50% and then leave it at rest... but I would like it to turn off at 50% when at rest
Got it - then it is working as designed. I can proceed using POS for Auto, was just a thought.Speed is the same as Position with the added requirement of moving the pedal swiftly.
I don’t think there is a “timeout” option where leaving it in the middle untouched bypasses the block.
This is the way.