GeeJee
Inspired
Works great in my "Scenes-layout" but isn't working in my "Per-Preset layout". Settings are the same. Is this a known bug?FC: Fix Tuner not exiting when tapping a Stand-In Switch whose Hold function is Tuner.
Works great in my "Scenes-layout" but isn't working in my "Per-Preset layout". Settings are the same. Is this a known bug?FC: Fix Tuner not exiting when tapping a Stand-In Switch whose Hold function is Tuner.
Works great here. I'll try get a video done tomorrow going through some of the features. In the mean time the Triple Crest inspired some riffage today.
Nope.Ok.. so I'm currently on 12.03 and FC-12 FW 1.10..
Any odd steps I need to take, other then backing everything up.. in order to get to the latest and greatest?
Update Axe-Edit too if you haven't already. Not sure if that's required with 12.06, but it's the right thing.Nope.
Backup
Update
Enjoy
IIRC there is a firmware update for the FC as well: 1.11.Update Axe-Edit too if you haven't already. Not sure if that's required with 12.06, but it's the right thing.
This is the way.Nope.
Backup
Update
Enjoy
You're right of course, but since he mentioned his FC version, I figured he was on that case already.IIRC there is a firmware update for the FC as well: 1.11.
Thanks for the tip SpideyWorks fine for me using speed.
How do you have the Off Value set? I have mine set at 95% so when I put the pedal full up and let it rest it turns off. Then when I switch back to the scene where my expression pedal controls the volume block I'm at full volume.
So maybe I am mis-reading the directions: I thought POS was triggered with the OFF setting (manual pg 141). SPD is supposed to engage when pedal is moved, not based on position - correct? Like, if on SPD my WAH does bypass when pedal is down, but remains on when I move pedal to say 50% and then leave it at rest... but I would like it to turn off at 50% when at restWorks fine for me using speed.
How do you have the Off Value set? I have mine set at 95% so when I put the pedal full up and let it rest it turns off. Then when I switch back to the scene where my expression pedal controls the volume block I'm at full volume.
Speed type just requires a “rush” of motion. It was developed so if your pedal is physically creeping down when not touching it, it wouldn’t engage once it passes the threshold.So maybe I am mis-reading the directions: I thought POS was triggered with the OFF setting (manual pg 141). SPD is supposed to engage when pedal is moved, not based on position - correct? Like, if on SPD my WAH does bypass when pedal is down, but remains on when I move pedal to say 50% and then leave it at rest... but I would like it to turn off at 50% when at rest
Got it - then it is working as designed. I can proceed using POS for Auto, was just a thought.Speed is the same as Position with the added requirement of moving the pedal swiftly.
I don’t think there is a “timeout” option where leaving it in the middle untouched bypasses the block.
This is the way.