Axe-Fx III Firmware 27.01 Release

Status
Not open for further replies.
Is there an issue with the tuner use offset on/off switch? I updates from 27 to 27.01 and suddenly my tuning was wrong. I still had some offset values in from past but the use offset switch was off. I removed the values and everything is fine again. Seams, that use offset off is not working.
 
unix-guy said:
From the hardware or from the editor?

What version of the editor?

What firmware version were you on previously?

Do you have the correct current version of DynaCabs installed?
Click to expand...
I was on the last dyna cab software and running software 27 on the axe and on axe edit I update it every time one comes through. When I opened axe edit on my computer an update came through, so I did that update. Then I opened fractal bot from axe edit and it came up with 3 updates, firmware27.01, usb update and dyna cab. I did the firmware first then the usb one then dyna cab . I'll try again on a later date .
 
Heavyelement said:
I was on the last dyna cab software and running software 27 on the axe and on axe edit I update it every time one comes through. When I opened axe edit on my computer an update came through, so I did that update. Then I opened fractal bot from axe edit and it came up with 3 updates, firmware27.01, usb update and dyna cab. I did the firmware first then the usb one then dyna cab . I'll try again on a later date .
Click to expand...
I've had problems with dyna cabs too, went back to 27.00 and up again, went down to dynas 1.05 and up again...to no avail.
So I powered everything off and went to bed.
The next day the cabs were listed alright and the dynas worked again. AE still had the names listed wrong so I RANF'd and it also got them right.
The one thing that keeps me puzzled is, how it got solved simply by taking the power away.
 
TheRedDevil said:
Is there an issue with the tuner use offset on/off switch? I updates from 27 to 27.01 and suddenly my tuning was wrong. I still had some offset values in from past but the use offset switch was off. I removed the values and everything is fine again. Seams, that use offset off is not working.
Click to expand...

TheRedDevil said:
Is there an issue with the tuner use offset on/off switch? I updates from 27 to 27.01 and suddenly my tuning was wrong. I still had some offset values in from past but the use offset switch was off. I removed the values and everything is fine again. Seams, that use offset off is not working.
Click to expand...
I think the offset got turned off after this firmware update. I had it on and noticed it switched to off afterward. Seems to work here after turning it on. Turning off works here for me.
 
tripulante.db said:
I also had the impression that with F27.00 I was tuning better than with 27.01.
To fix this, do I have to turn the offset switch on and off again?
Click to expand...
I had the same impression also after removing all offset values (set to zero) and offset switch to Off (it was never on). Something changed, or? Better return to tuner code of 27.00? But I like the color change feature.
 
Last edited:
tripulante.db said:
I also had the impression that with F27.00 I was tuning better than with 27.01.
To fix this, do I have to turn the offset switch on and off again?
Click to expand...
I was saying that I had offsets on prior to these firmware updates. They were off when I looked this morning. It could have happened a while back though as I have not changed the offsets for some time. Not saying anything had to be turned off and on to work.
 
The question is whether the tuner still works as perfectly as with the 27.00. Is was always good but with 27.00 better than before. Only FAS knows if the tune behavior code changed.
 
BUG?

After installing firmware V27.01 and Axe Edit III V1.14.03, so far I have found 2 serious problems for editing my presets:
1) For all Blocks, the Type field is blank.
2) In the Amp Blocks, under Ideal, the Boost, Cut, Fat, and Bright switches are grayed out and can't be toggled.

Has anyone else seen/ reported these issues?
 
Mike Perodeau said:
BUG?

After installing firmware V27.01 and Axe Edit III V1.14.03, so far I have found 2 serious problems for editing my presets:
1) For all Blocks, the Type field is blank.
2) In the Amp Blocks, under Ideal, the Boost, Cut, Fat, and Bright switches are grayed out and can't be toggled.

Has anyone else seen/ reported these issues?
Click to expand...
To avoid any potential conclusion, the problem with Block Type not being displayed is in the field under the Channels. The In, Drive, Amp, etc... blocks in the presets are labeled. Just can't see or change the Type of Drive, Amp, etc...
 
Mike Perodeau said:
To avoid any potential conclusion, the problem with Block Type not being displayed is in the field under the Channels. The In, Drive, Amp, etc... blocks in the presets are labeled. Just can't see or change the Type of Drive, Amp, etc...
Click to expand...
........any potential confusion... (I hate autocorrect LOL)!
 
Mike Perodeau said:
BUG?

After installing firmware V27.01 and Axe Edit III V1.14.03, so far I have found 2 serious problems for editing my presets:
1) For all Blocks, the Type field is blank.
2) In the Amp Blocks, under Ideal, the Boost, Cut, Fat, and Bright switches are grayed out and can't be toggled.

Has anyone else seen/ reported these issues?
Click to expand...
Can you please try the Refresh after new firmware... in Axe-Edit and let us know if that fixes the problem?
 
Mike Perodeau said:
BUG?

After installing firmware V27.01 and Axe Edit III V1.14.03, so far I have found 2 serious problems for editing my presets:
1) For all Blocks, the Type field is blank.
2) In the Amp Blocks, under Ideal, the Boost, Cut, Fat, and Bright switches are grayed out and can't be toggled.

Has anyone else seen/ reported these issues?
Click to expand...
I had this, Refresh After New Firmware fixed it. First time I have ever had to do it.... think it was caused by the USB firmware update and using FractalBot through Axe Edit because I used to use FractalBot standalone
 
Status
Not open for further replies.
Back
Top Bottom