Axe-Fx III Firmware 27.01 Release

Status
Not open for further replies.
FractalAudio said:
Added MIDI Clock transmit. This can be configured to send MIDI clock messages to MIDI, USB or both (or off). Default is MIDI only. NOTE: USB Firmware 1.17 or greater is required to send MIDI Clock over USB. If you require MIDI Clock to a USB host then you need to install USB Firmware version 1.17 or greater.
Click to expand...
Thank you!
Happy I Love You GIF by Warner Bros. Deutschland


Just one step closer to send CC from the external pedals to the MIDI USB, for recording the pedals performance (e.g.: Wah or Vol swells) in a MIDI track at the DAW, for ulterior re-amping 🤓
Reaching So Close GIF by TELUS
 
Last edited:
Anyone else having issues sending MIDI clock from the axe to external MIDI devices? Seems like my axe is only sending the correct clock when I manually enter a new tempo. After a preset change, all other presets seem to be sending the same clock value regardless of their saved tempo information. For reference I have receive MIDI clock set to "OFF" and send MIDI clock set to "MIDI".
 
djsuperdock said:
Anyone else having issues sending MIDI clock from the axe to external MIDI devices? Seems like my axe is only sending the correct clock when I manually enter a new tempo. After a preset change, all other presets seem to be sending the same clock value regardless of their saved tempo information. For reference I have receive MIDI clock set to "OFF" and send MIDI clock set to "MIDI".
Click to expand...

Switch Tempo in Controllers > Tempo to: Per Preset.
 
bioxava said:
Since I recently discovered the Air/Room tab I no longer use reverb. It grabbed me by the n#ts. What a feature!
Click to expand...


The obvious answer is to try it, but how does the Air/Room settings differ from the Proximity knob in the Cab block? I've been using proximity to add "airiness".
 
Update complete... yes, I'm a newb so bare with me.

  • Suddenly my favorite Dual Delay presets are a little too pronounced.
  • Also I'm hearing slight digital nastiness in some of my higher gain blocks.
    EDIT: the boost block was disabled for some reason, reenabling it smoothed it out back to normal. I should probably tweak the patch w/boost off.

Everything was perfect before the update 😭
 
This may have been an isolated incident, but after loading Firmware 27.01 and the new USB Firmware 1.17, tempo and MIDI scene changes from my DAW stopped functioning.

I had to reinstall the USB driver for it work again.
 
Status
Not open for further replies.
Back
Top Bottom