Hello,
I updated very recently from firmware 20. I started playing with dynacab today and I have an issue. Is it normal that the AIR parameter react very differently when using DynaCab?
I feel it is doing a very strange behaviour, cutting some frequencies instead of just adding air as it did with normal IRs.
Here is an audio exemple of what it is doing. Please excuse me it is not a guitar but a hurdy gurdy
.
REC 1 is legacy cab 79 junior blues & AIR at 0%
REC 2 is Dynacab JR Blues with settings matching the legacy IR and AIR at 0%
REC 3 is same legacy cab with AIR at 30% (air freq at 8000Hz)
REC 4 is same dynacab with AIR at 30% (air freq at 8000Hz)
As you can hear REC 1 & REC 2 sounds very similar but REC 3 & 4 very different. REC 4 sounds like there is a loss in some high frequencies, or maybe like a phasing issue.
I double checked all other parameters, and reseted CAB block but it did the same.