King Prawn
Inspired
ALLAH AKBAR
How are you getting on with Axe manage integration?
I have downloaded my USB softweare so I can update patches from Axe-Exchange. I DON'T eed a MIDI cable to do the update to 11.0, do I????
I ask because I just read "Yeks How Tos" and it stated the following:
_________________________________________________________________________
How to update:
1. Create the connection between the Axe-Fx (MIDI IN) and the computer
2. Load the firmware SysEx file into the application
3. On the Axe-Fx go to Utility > Firmware, press Enter
4. Send the file from the computer to the Axe-Fx
5. A progress box should appear on the Axe-Fx. It will take several minutes to transfer the file
6. If all goes well, the Axe-Fx will display "GOOD CHECKSUM". If not, it displays "BAD CHECKSUM". In that case switch the Axe-Fx off and on again, check everything and rerun the procedure
7. After a successful update the Axe-Fx will reboot
______________________________________________________________
Is this true?? What exactly do I need IF I NEED A MIDI CABLE? How many Pins? Midi to USB? What?
Hopefully, this i solder info and I can just update via a USB Connection to the AFX-II like i do when I download another Users Custom Pre-Set onto my AFX-II like I do when using the Axe-Exchange.
I have downloaded my USB softweare so I can update patches from Axe-Exchange. I DON'T eed a MIDI cable to do the update to 11.0, do I????
I ask because I just read "Yeks How Tos" and it stated the following:
_________________________________________________________________________
How to update:
1. Create the connection between the Axe-Fx (MIDI IN) and the computer
2. Load the firmware SysEx file into the application
3. On the Axe-Fx go to Utility > Firmware, press Enter
4. Send the file from the computer to the Axe-Fx
5. A progress box should appear on the Axe-Fx. It will take several minutes to transfer the file
6. If all goes well, the Axe-Fx will display "GOOD CHECKSUM". If not, it displays "BAD CHECKSUM". In that case switch the Axe-Fx off and on again, check everything and rerun the procedure
7. After a successful update the Axe-Fx will reboot
______________________________________________________________
Is this true?? What exactly do I need IF I NEED A MIDI CABLE? How many Pins? Midi to USB? What?
Hopefully, this i solder info and I can just update via a USB Connection to the AFX-II like i do when I download another Users Custom Pre-Set onto my AFX-II like I do when using the Axe-Exchange.
I have downloaded my USB softweare so I can update patches from Axe-Exchange. I DON'T eed a MIDI cable to do the update to 11.0, do I????
I ask because I just read "Yeks How Tos" and it stated the following:
_________________________________________________________________________
How to update:
1. Create the connection between the Axe-Fx (MIDI IN) and the computer
2. Load the firmware SysEx file into the application
3. On the Axe-Fx go to Utility > Firmware, press Enter
4. Send the file from the computer to the Axe-Fx
5. A progress box should appear on the Axe-Fx. It will take several minutes to transfer the file
6. If all goes well, the Axe-Fx will display "GOOD CHECKSUM". If not, it displays "BAD CHECKSUM". In that case switch the Axe-Fx off and on again, check everything and rerun the procedure
7. After a successful update the Axe-Fx will reboot
______________________________________________________________
Is this true?? What exactly do I need IF I NEED A MIDI CABLE? How many Pins? Midi to USB? What?
Hopefully, this i solder info and I can just update via a USB Connection to the AFX-II like i do when I download another Users Custom Pre-Set onto my AFX-II like I do when using the Axe-Exchange.
How do I import and store the factory presets on the Axe?