midi changes

  1. T

    Wish: SETUP > MIDI/Remote → Preset +1 and set its source to PEDAL 2

    Hi, Loving my AM4! I'd love it if I could assign MIDI/Remote → Preset +1 and set its source to PEDAL 2 (vs only a CC#) so I could use an external non-midi single button switch to advance through presets and reserve the 4 four native AM4 switches to select Scenes within each Preset. I know I...
  2. A

    Cannot Update Firmware, cannot connect via USB

    Searched a lot of forums for a solution, but I am still having trouble. Running my AxeFx III MkII Turbo into my PC. I never had an issue until last week when the unit stopped communicating with my computer via a USB-B to USB 2.0 cable. I purchased three new cables and even tried USB-B to Type...
    • arguspuppy
    • Thread
    • axefx 3 boot screen computer firmware midi midi cable midi changes timeout update error usb cable
    • Replies: 5
    • Forum: Axe-Fx III Discussion
  3. A

    Axe fx III routing

    Hey! This is my first thread but I'm hoping I'm able to get some feedback. I wanted to integrate a mesa boogie dual rectifier with the axe fx 3 setup in the future. Right now, the plan is to have a rack setup which includes the axe fx 3 and the fryette lxii along with a mesa 4x12 OS slant cab...
  4. S

    Tempo Change Via MIDI

    So, I’m pretty comfortable with MIDI and using it with my FM-9 Turbo, but the one thing I haven’t been able to figure out is how to send tempo change messages from Logic to my FM-9. The manual says it should be doable, but I just can’t figure out how, and the manual doesn’t say. I’ve got the...
    • Samus
    • Thread
    • midi midi changes midi clock midi clock sync tempo tap bpm midi control tempo tempo changes tempo sync tempo synchronisation
    • Replies: 9
    • Forum: FM9 Discussion
  5. M

    Midi change scene skips (FM9, Logic pro)

    Hi there, I'm having trouble changing midi programs. That is, when I press play and stop, the scene skips to the default (scene 1) before returning to the scene where I wrote the automation. Is it possible to resolve this to make sure it does not go to the scene default at initial? *It makes...
  6. I

    Amp parameter arduino MIDI for axe fx

    Here is a project to use arduino to control the axe fx via CC midi. ( I used FM3, not tested on other hardware) I Currently have mine set up to control Gain, Bass, Mid, and treble, this uses five pots for each parameter. Pot Wiring: lug 1 --> Goes to ground on arduino Lug 2 (middle lug) -->...
  7. jason_parra

    MIDI/Remote: Scene Mode Selection

    Hello All, I'm working on programming my FM3 to be controlled by the secuences via MIDI, I can control how to change the bank and how to select the scene and so on, what I would like to do is to set the FM3 in "Scene Mode" for some patches and set the FM3 to "Effect Mode" in other patches but I...
  8. J

    Problem with MIDI control/program change of Axe-Fx 3

    Hi everyone, I use a computer to send midi commands to my axe-fx3 to switch scenes and presets. It works, but I just can't make it seemless. I've created my presets and scenes so that when I strum a chord and then switch between scenes using the Nav buttons on the Axe-Fx, the switching is...
  9. Dobster

    2018 - Midi Raider - Scene Programming, HELP!

    Ahhh... this seems to be an ongoing problem from back in 2011-12 with no answer. It seems to me that there's no way to set up Scenes still and i've scoured the internet for videos/forum tips etc. Just got my AxFXII XL+ and a Midi Raider and taught myself Midi (never used it outside of...
    • Dobster
    • Thread
    • footswitch footswitches midi midi changes midi control midi control / preset banks midi raider midi switching rocktron scene change
    • Replies: 5
    • Forum: Other MIDI Controllers
  10. A

    Axe-Fx III MIDI questions

    Hey guys, So Im preparing a live set and programming a bunch of patch changes for the songs. A couple of questions. Firstly, there seems to be a little silence and delay switch between scenes. Many of the scenes are switching channels. I think I read this will be cured in the next firmware...
  11. P

    MIDI program change syntax for AX8

    I’m using Set list Maker (SLM) app on my iPad, and have conected it to AX8 wirelessly over bluetooth. I’d like to change AX8 presets from SLM, and to do it one creates a MIDI preset in SLM that triggers a preset change in AX8 when executed. AX8 manual has MIDI program change commandsblisted on...
  12. Kalen Austin

    Programmed Midi Scene switching issue... HELP

    I've currently got an AX8 and I'm setting it up to switch patches scenes from a midi output through Pro Tools. (Before anyone asks, I know it seems weird to have the AX8 and do midi switching, but the Axe Fx II XL is a little out of my budget for a little while, I will be getting one down the...
  13. Jose Balbuena

    Help using Midi with Engl Invader II

    Hello, I recently got my fx8 a few days ago and I'm having trouble setting up midi control with my amp. My goal was to create a preset and have my amp switch channels with the scenes. I've looked thru the manual but I'm a complete noob and still can't get it to work :cry:. If anyone has the time...
    • Jose Balbuena
    • Thread
    • fx 8 midi midi changes midi control midi control / preset banks midi controller
    • Replies: 4
    • Forum: FX8 Discussion
  14. DTS

    iCTRL R mini

    If you are looking for a small midicontroller with a great features... This might be it. I just ordered mine and can't wait to test it out. The iCtrl-R Mini is the first MIDI floor controller equipped with gesture recognition technology, the Vslider, so you can control tones just by moving...
  15. R

    Midi changes in Logic Pro X

    Here's my situation... I'm using an Axe-Fx 2 XL+. My band has a collection of songs in Logic. Each song is in its own project. Each song has its own midi track for patch changes. What I was wondering is how to copy and paste a midi track into logic so that it will work the same in one project as...
Back
Top Bottom