Search results for query: *

  1. J

    FS AxeFX II, MFC101, Mission SP1, Mission EP1

    AxeFX II (first gen) Ares 2.00 fw, MFC-101, Mission SP1, Mission EP1 - will separate. I recently picked this up to help out a buddy that needed $ quickly but I simply don't have a use for it and know it'll just sit unused. It's been very well cared for an in great condition; sounds fantastic; no...
  2. J

    Is it possible to use 4CM and bypass the 'A' (preamp section)?

    In the past, I've been able to get a clean tone that I like simply by running guitar into Chorus/EQ/Reverb running direct to the power amp section. The way the FX8 is laid out, it looks like it's impossible to pass the AMP in the signal chain. I'd love to be able to have my high gain tone by...
  3. J

    Is it possible to use 4CM and bypass the 'A' (preamp section)?

    Chorus+EQ in the pre section straight to the power amp section.
  4. J

    Is it possible to use 4CM and bypass the 'A' (preamp section)?

    Using the 4-cable method, is there a way to send the input to come in after the (A) amp in the signal path? What I'd like to do is have the input signal skip the preamp section of the amp and go straight to the FX8 output (which goes into the amp fx return).
  5. J

    Rocktron Mainline 1U power amp

    Here's the transcript from the video. "We wanted to have a power amp that had that same feel as a tube amplifier so we've gone beyond our Velocity, which is our thunderous lows, blistering high awesome metal preamp poweramp to the Mainline; which has a circuit that emulates the tube impedance...
  6. J

    Difference in a 8"/10"/12" FRFR Powered Speaker

    Check out the K10s, the K8,K10,K12 all have the same power section but the K10 has a better spread. My band uses two K10s for mains and they are stupid loud and more than capable of handling running FRFR. I play in a very loud 80s hard rock tribute band, so we get ridiculously loud and the...
  7. J

    Rocktron Mainline 1U power amp

    Check out this video at about the 3:20 mark. https://youtu.be/DPQpgCetPpU
  8. J

    Rocktron Mainline 1U power amp

    I saw a demo video of the Rocktron Mainline and tried searching around for it on different forums and can't seem to find anyone talking about it. Does anybody know when it'll be available? I've got a Velocity 300, but the way it was described made me think that the Mainline would be more to my...
  9. J

    Any Genz Benz 2X12 Flex cab UR's out there that anybody knows of...?

    Following -- cause I'd like to know if anyone has one before I go thru making one of my own.
  10. J

    CAB on RIGHT Output 1 only?

    Is there a way to assign a CAB block to only be active on the RIGHT channel of Output 1; but not LEFT? No, I can't use Output 2 (loop).
  11. J

    Anyone had or has ENGL POWERBALL type I ?

    Out of the dozens of tube heads I've had over the years, the only ones that I somewhat regret parting with were the Engl Powerball I (haven't tried the II), the Bogner Ecstasy Classic and the Mesa Road King. The Powerball was the one that I miss the most. It was one of the very few amps that...
  12. J

    Anyone using EHX .44 Magnum with Axe FX?

    I have the EHX 44 and an EHX 22; both work and sound great I haven't used it live, but have at band practice. As for coloring, it's no different than coloring from any other power amp. It may or may not require a bit of tweaking to get your tones. It's not my main power amp, but it's nice to...
  13. J

    Using more than 2 expression pedals

    I have one VPJR set to control my volume, one as a Wah and I would like one more to do various CC functions - such as sweeping between two different amps, or delay times or whatever really.
  14. J

    Using more than 2 expression pedals

    I currently use an AxeFX Standard with a GCP (two EB VP Jr for CC). Works great, but I'd like to be able to add a couple more CC pedals. I know I could probably just use the Pedal 1 & Pedal 2 input, but is there any way, using midi, to have more than two CC pedals?
  15. J

    Fender is Awesome

    Man, I would be very excited about this if it were released for my Vetta'd AxeFX Standard.
  16. J

    Issue with CC pedal not saving saved setting when returning to patch.

    Situation: I'm using the Standard with a GCP with two EBJr's as CCs. Here's my rough example. I have two amps set up like this: I then control which is active via CC by setting the EXP1 state on each of the MIXER block gain controls. I set one for 100% to 0% and the other from 0% to...
  17. J

    Talk Box

    Yeah. I saw that. Was hoping for some more responses that didn't get off topic.
  18. J

    Talk Box

    OK - I need a 'talk box' effect and I assume that the AxeFX can't do it (I have a standard) so I know I need to buy one. I have a Rocktron Banshee, but I've not been able to incorporate it into my setup the right way. Can someone give me some advice on how best to set up the Banshee with the...
  19. J

    GCP CC pedal weirdness

    Crap, thats what it was. Thanks guys. Forgot I changed that on P2 when I had another setup pointed to a Gmajor.
  20. J

    GCP CC pedal weirdness

    OK - So I have my AxeFX Standard, GCP, and two ERnie Ball VP Jr's connected to the GCP. In the GCP, I have both P1 & P2 turned on, I step on a patch and ensure that P1 is set to CC10 and P2 is set to CC16. I can step on P1 and see the display on the GCP go from 0-127, no issues. I can step...
  21. J

    Amp model names

    Didnt Johnson Amps use the real amp names in the Millenium? And if that isnt good enough, what about a third party mod like there is for the Vetta to show real amp names? Soundside - Multimedia Solutions
  22. J

    Amp model names

    I would really like to have the amp model names be what they are intended to be a model of. Not in Axe-Edit either, in the unit itself.
  23. J

    TubeAmp vs AxeUltra = my test

    I'd say first is the amp, second is the AxeFX First clip sounds more 'open' and less compressed and restricted.
  24. J

    Hey Mike, Here's a PM for you that you requested...

    Hey Mike, Here's a PM for you that you requested...
  25. J

    Can an expression pedal w/ Axe-Fx wah replace need for standalone wah?

    I use a Ground Control Pro with two Ernie Ball Jr. pedals; one configured in the AxeFX for wah on some patches, it works great with the auto-engage - more similar to the way a Morley optical pedal would respond by engaging when stepped on and then turning off when not. I prefer this method...
  26. J

    Using Cab sims into a guitar cabinet

    Mesa 20/20 I have a couple of the Mesa 20/20's as well as many other power amps and anybody that needs more power than a 20/20 for live use is doing it wrong. < spam > A huge bonus with the 20/20 is the deep mod, if you can do that, it totally opens up the amp and makes it that much more...
  27. J

    FRFR: Peavey Impulse 1015

    OK - So I know these aren't the greatest choice in the world for going FRFR, but hear me out... I've used my AxeFX as my standalone preamp/effects unit for a while, then decided to go back to my Egnater M4 for tones; pushing off my AxeFX for effects only. While that's working fine, I can't...
  28. J

    Midi merge device, will it do this?

    Are there any devices that will convert pc changes to be cc changes?
  29. J

    Midi merge device, will it do this?

    I use my GCP with my axefx...i have two eb cc pedals connected to the GCP. I have my GCP in 10 button mode, but there are times that i still would like to be able to have some individual on/off effects without losing my full 10 patch per bank setup. If I were to get a midi merge device, could...
  30. J

    EHX 44 Magnum Power Amp

    OK - So I got an EHX 44 Magnum Power Amp for xmas. This guy is freakin' awesome. I was just going to use it for quick band practices with my Line 6 M9 into it, then into a 2x12 cab. Did a 3 hour band practice with it last week and it was incredible. SUPER loud and I didn't have to crank...
  31. J

    1 In to separate outs (one with a cab sim, one without) - independent volumes

    I run guitar into the front of the AxeFX, then want to split my signal so that one output goes to one amp, then branch off the signal after everything else but add a cab block before sending it to the second output. I want totally separate volumes and one output to have a cab block on it that...
  32. J

    How do you deal with this problem?

    Working with what I already have in my collection over many years of playing
  33. J

    How do you deal with this problem?

    Personally, I play out a lot and I *need* my guitars to sound consistent. I play ESPs (real ones), Ibanez RGs and Peavey Wolfgangs. The stock pickups in all of those guitars sound drastically different. If I were to be playing a show using an Ibanez RG; then need to switch guitars due to a...
  34. J

    Atomic 2U 100 Watt Stereo Tube Power Amp

    1U FTW a 2U power amp isn't hard to come by. a good 1U power amp on the other hand...tube especially...is always of interest to me. I always regret selling my Mesa 20/20s. Those little guys are awesome. I think that 1U SS power amps are becoming more and more common with the new things coming...
  35. J

    How do you deal with this problem?

    Probably not what most people would want, but I have EMGs in all of my guitars. I play out enough that I always wanted my guitars to sound the same regardless of which one I pick up, I rely on the amp to control the tone and not the guitar as much.
  36. J

    Powering my GCP via Midi - help!

    The Line 6 power supply is 2.5mm, but it sure doesn't fit.
  37. J

    Powering my GCP via Midi - help!

    OK - So I use the Ground Control Pro to control my AxeFX. I use a Line 6 PX-2 (same that is used with all of the 4 button modelers) power supply to power my GCP. No issues there, it works perfectly. I want to power my GCP thru MIDI by plugging my Line6 power supply into the back of the...
  38. J

    Marsha Hairy Brown Eye VIDEO Clip

    Updated to 10.03 right before a show over the weekend, played with the preset Mark created here and fell in love with it instantly. I immediately made it my global patch. I did modify it a bit by adding a WAH block up front with the autoengage, since I use that. I also tweaked the global EQ a...
  39. J

    Mesa 20/20 vs Marshall EL84 20/20?

    I've had both. The Mesa sounded and 'felt' better to me. The Marshall was darker and not in a great way I didn't think. I did the depth mod to my Mesa 20/20 and it was so very much worth it. Don't hesitate (or send it to me and I'll do it for you for a small fee plus return shipping) to do...
  40. J

    Line 6 fbv Mk2

    I too would be interested in this and would also like to offer up my services to reproduce these for resale as long as someone else can do the programming. I can make PCBs and populate them and sell/distribute in the US (and other countries) if no one else is jumping on it.
  41. J

    From VHT 2902 to ____ power amp?

    I too use the VHT 2/90/2 and while it's true that it's (imo) one of the nicest power amps I've every used (especially with KT88's) - the weight is a definite killer. I play out a lot and portability and tone quality is something you start to weigh more seriously when you are lugging your own...
  42. J

    Peavey IPR 1600 Power Amp + AxeFX

    Yeah, a lot of EQ reshaping is required to get it to sound the same as a previous power amp you might have used. But the weight is incredible. Gigged with it over the weekend and it was awesome. I totally agree with the LEDs being too bright. The absolutely annoying thing is that it lights up...
  43. J

    Peavey IPR 1600 Power Amp + AxeFX

    Hmm. All I did was tweak the global EQ to better suit my tone and it was just fine as it was. I didn't notice anything 'brittle' about it. There's enough tweaking in the AxeFX to make up or take away from anything that is undesirable in the power amp.
  44. J

    Have a Mesa Power 2:90...what to expect if switched to a VHT

    Re: Have a Mesa Power 2:90...what to expect if switched to a I've had the Mesa 2:90 and 2:100 and I still own a VHT 2/90/2. I also use the Genz Benz G-Flex 2x12s (four of 'em) The 2/90/2 is clearly the better choice if you put them in the same room and try them side by side. (I have). It...
  45. J

    Peavey IPR 1600 Power Amp + AxeFX

    So, I bought one of the Peavey IPR1600 power amps to use with my AxeFX rig, mostly because I wanted something light and powerful. I have a VHT 2/90/2 that weighs a ton, but sounds like god. I have a Marshall 8008 that is pretty heavy but sounds good. 1U is a plus. I also have used my AxeFX with...
  46. J

    Carol Ann...Not what I was expecting?!

    If the Carol Ann does get "fixed" to be closer to the real thing in an update; can we keep what's there now as a separate amp model, I really dig what's there now - maybe change the name to avoid confusion, but I'd hate to lose that one because it may get an upgrade in a future version.
  47. J

    I may have a proper solution for the 4CM hum/hiss problem

    Well, here's how I have it set up now and it works great; but the hum comes when I'm using the Egnater or Bogner in high gain channels. I have a single connector cable between the Egnater out and the GRX4 Return and that solved the hum from the high gain channels on the Egnater. I tried a single...
  48. J

    I may have a proper solution for the 4CM hum/hiss problem

    Can someone give this layout a look and see where the ground loop may be coming from? Here's my setup: Guitar-> AxeFX Input AxeFX Send to Axess Electronics BS2 BS2 Main Out to Bogner XTC Classic Head BS2 ISO'd Out to Egnater M4 Preamp Bogner FX Send to Axess Electronics GRX4 Loop 4 Input...
  49. J

    4CM Hum - yeah, again...

    So, I've read a bunch of the other posts about the 4CH hum problem and all that, but I'm still not sure I've come to a conclusion as to how to avoid the problem. Is it an impedance issue? Is it a buffer issue? I'm running: Guitar -> AxeFX Input AxeFX Loop Send to Axess BS-2 splitter BS-2 Main...
  50. J

    Behringer B-Control BCR2000 Midi Controller?

    The one thing that I don't like so much about the AxeFX is when I get a tone that I like; in a live situation, I can't necessarily tweak a few key knobs as quick as I'd like to. I saw this device and was wondering if this would work well with the AxeFX to let me map some knobs to be able to...
  51. J

    Is there a Genz Benz G-Flex 2x12 IR?

    Yes, but they didn't sound quite as good as I had expected so I was going to redo them when I had more time to mess with mic placement and different power amps. For those of you interested in checking out what I have so far, here's what I've got. http://www.americanhc.us/GenzBenzGFlex212.zip...
  52. J

    Is there a Genz Benz G-Flex 2x12 IR?

    I did make some yesterday, but they weren't the best, so I'm going to re-do them later today.
  53. J

    Help uploading user cabs

    I got it working again. Seems that every time I unplug my M-Audio UNO and then plug it back it, it gets a Microsoft driver that doesn't work. I then have to go to device manager and force the M-Audio driver, then everything works again.
  54. J

    Help uploading user cabs

    Anybody find a resolution to this yet? I'm trying the same thing and it's like when I choose "Select Cabinet Folder" and point it to any directory where I have the Sysex file from an IR; it doesn't see any files. I've tried it with a ton of IRs and this editor just doesn't work. I know I did it...
  55. J

    Is there a Genz Benz G-Flex 2x12 IR?

    Cool, I'll try to do it tomorrow. I had been looking up info on how to do the IRs and think I can do it pretty easily. As for power amp; which of these would be the best to use to play the sweep thru? VHT 2/90/2 MosValve 500 Crate PowerBlock QSC RMX850 QSC RMX2450 Or I could run it thru the...
  56. J

    Is there a Genz Benz G-Flex 2x12 IR?

    I have four G-Flex 2x12's, but I'm not sure how to make an IR. Let me look into making an IR and I'll see what I can do.
  57. J

    Dual signal routing...

    I figured it out. Thanks... However, I remember reading something about using a Mixer block and then panning one signal left and the other right to separate what was going where... Damn, you know - I think it was when I was looking into having a signal with a cab sim going out the XLRs and the...
  58. J

    Dual signal routing...

    OK - I've searched until I'm at my wits end and can't find what I'm looking for...I know I've seen it before though. What I want to do is have my guitar signal going into the AxeFX -- running thru my pre-effects, then out of the AxeFX to my external preamp - then back into the AxeFX for post...
  59. J

    4CM hissing

    I just hooked up my Egnater M4 in the loop of the AxeFX and got a pretty nasty hissing noise that was enough to be a problem. I had a similar issue with setting up my Egnater M4 with a Digitech GSP1101. The problem there was that the noise gate was BEFORE the loop where the external preamp was...
  60. J

    FCB1010

    Hey voes... Can you take a look at my problem here and let me know if this is something that could be caused because I'm not sending PC on 2-5? viewtopic.php?t=317 Also, I am only using CC#'s 26-31. Is pitch somehow one of those numbers even though I have it set to NONE. Basically, I'm...
  61. J

    FCB1010

    I'm using the UnO firmware in my 1010, setup exactly like these instructions here: http://www.voes.be/fcb1010/pdf/fcb1010% ... ftware.pdf The only difference I've added is that I'm using stompbox 10 to send two separate CC signals so that I can basically A/B between two amps in a patch. (works...
  62. J

    FCB1010

    I installed my UnO firmware today in one of my FCB1010's and started playing with it with the AxeFX. I wish I could have more than 5 stompboxes available...is that impossible? I really only need three program changes, but seven stompboxes... One good thing I was able to accomplish with this...
  63. J

    MFC101 pics!!!

    I use an FCB1010 and it works fine...but not quite the quality of the Ground Control Pro that I used to have, but having those built in CC pedals makes a big difference. I sure would like to see a high quality unit with at least one built in CC pedal...or two... One cool thing I did with my...
Back
Top Bottom