Search results for query: *

  1. swervedriver

    Setlist function preview

    Very cool. The ability to organise presets this way without having to shuffle them around in the Preset Manager is great! Looking forward to seeing it implemented on the FM3. One question though: Is it possible to assign one stomp button to "Next Song Section" (and I guess also one for...
  2. swervedriver

    FM3 Firmware Version 5.00

    That's one chunky update. Lots to wrap my head around, but wanted to mention two personal highlights from that whole feature list. I'm not sure if these types in the Plex Delay block are new (honestly haven't checked since setting up my presets, so they're new to me at least), but I'm really...
  3. swervedriver

    Fatigue with the "I am hitting the CPU limits" on the FM3 talk???

    I don't mind it, I actually kinda like the challenge to work in every effect I want without exceeding the CPU limit. Work with what you have. It forces me to optimize my presets, consciously think about what I need it to do and cut the fat so to speak. Well, within the current 80% limit that is...
  4. swervedriver

    FM3 Firmware Version 4.00

    I'll be honest and say I don't know what the default Low Cut setting was prior, just that the value seemed oddly high to me while I was troubleshooting where my low end went. Changing it to 20 Hz fixed it on the affected scenes, and the result made me pretty happy with the whole Cygnus update...
  5. swervedriver

    FM3 Firmware Version 4.00

    Regarding the drive block discussion, just thought I'd mention I noticed the Low Cut of all my TS808 OD drives was set too 700 Hz after upgrading from 3.02 to 4.00. No big deal to put those back to 20 Hz (I do all my low-cutting in the Cab block), but probably an unintended side-effect of the...
  6. swervedriver

    Presenting... The Axe-Fx III

    Sorry if this has been asked before, I might've missed it while reading through most of this thread and skimming the titles of the topics in this subforum... But, is the number of available scenes per preset still 8? Are there any options to increase it to maybe 10 (or even 12)? The number of...
  7. swervedriver

    Dutch Axe-Fest 2016 (videos and pictures added)

    Registered. I probably can't stay until the very end, but I'm sure I'll be sick of it by then anyway. ;) Looking forward to it!
  8. swervedriver

    Dutch Axe-Fest 2016 (videos and pictures added)

    I'll have to check whether or not I've got studio obligations with my band, but if not I'm registering for sure. Thanks for putting all the effort into organizing this great event again! :)
  9. swervedriver

    Axe-Fx II "Quantum" Rev 2.02 Firmware Release

    2.02+ == 2.02 and beyond (2.03, 2.04, etc), at least in my understanding. I'll use whatever it defaults too :D
  10. swervedriver

    Unique/psychedelic/experimental effects in the axefx

    My two craziest effected sounds are probably not even half as crazy as those. :) 1. Spooky trem - Attach an LFO to the frequency of a tremolo, and set the mix level of the Dimension D chorus to 25-30% on a clean sound you like. Play with the LFO min and max parameters to get a range of tremolo...
  11. swervedriver

    Axe-Fx II "Quantum" Rev 2.01 Firmware Release

    Thanks, very clear and helpful! Good to know scene controllers can be used in conjuction with global blocks, while maintaining a per-preset approach. Will definitely try this when I revisit my presets after the firmware upgrade. :) I used to handle gain+volume changes with the same scene...
  12. swervedriver

    Axe-Fx II "Quantum" Rev 2.01 Firmware Release

    I've never used global amps. So, out of curiosity: do scene controllers still work independently per preset if I were to use global amps? I use a scene controller tied to the gain knob in all my presets, but I'm varying the amount of gain it sets for different presets. If the global amp just has...
  13. swervedriver

    How to get lower notes to stand out when picking on a clean tone?

    Or try a different IR. In my case, I use a little compression at the start of the chain. When I like the high-end response but find the lower notes a little dull still, then I tend to lower the treble a little bit and turn up the bright control to around 1 o'clock.
  14. swervedriver

    Apparent UI Complaints

    I gave my Axe to my bandmate for a week so he could record some guitar parts for a demo we're working on. He's somewhat my opposite in that he doesn't like to spend a lot of time tweaking, particularly in the digital domain. His own amp is a H&K Switchblade 100, with a reverb pedal in front...
  15. swervedriver

    What gauge strings are you guys using for drop C

    .011 - .015 - 0.019 - 0.028 - 0.038 - .059 Based on my 25.5" scale Strat. From lowest tension in the d-string to highest tension in the low C-string. I buy them as separate D'Addario strings, although I wish Elixir would make the .059 gauge because I use their strings on my other guitars. They...
  16. swervedriver

    Axe Fest - The Dutch Version, 30 november 2013 @ Wisseloord Studio's, Hilversum

    Eindhoven. Distance is not an issue for me.
  17. swervedriver

    Axe Fest - The Dutch Version, 30 november 2013 @ Wisseloord Studio's, Hilversum

    I'd be happy to join the fun again, unless other obligations interfere. :)
  18. swervedriver

    What guitar amplification would you use live? (Metal music)

    Had this a few months ago. I simply put my CLR on a pole behind me on the stage (so that it was also aimed at the crowd) and had zero issues throughout. Well, the main vocal mic died near the end but that wasn't our fault. :D
  19. swervedriver

    The Devin Townsend Challenge

    The result:
  20. swervedriver

    Nice Job on the New Website!!!

    I got about six trophies when I first logged in, so I'm feeling pretty good about this experience. Would prefer something less eye-straining (darker theme) though, and more emphasis on when something was posted. At the moment I'm having a harder time navigating than before, but let's see how...
  21. swervedriver

    PRS Custom 22 soapbar - opinions?

    Perhaps it's a bit paranoid, but maybe check if it isn't stolen somehow? If he's unclear about why he wants to get rid of it, and for the low-ish price you mentioned, plus the fact he seems very eager to sell it right away without people having a decent look at it... I dunno, something feels...
  22. swervedriver

    How many amp models do you tend to use?

    The presets I use with the band only contain 2 or sometimes 3 amps (and two IRs). DoubleVerb for cleans, DoubleVerb + Blues OD drive for not-so-cleans, and depending on the song we're playing I'm using a Friedman BE or the mighty FAS Modern for mid to high gain. We're planning to record some...
  23. swervedriver

    Axe-Fx II "Quantum" Rev 1.01 Firmware Release

    Minor update with major consequences. Love the massive CPU usage reduction. I think I can get away with switching all my reverbs to HiRes now, where before I was limited to NormalRes, and still end up with lower CPU usage than on previous firmwares! :D FAnkS!
  24. swervedriver

    no sound after quantum 1.00 update.

    Try this: http://forum.fractalaudio.com/axe-fx-ii-discussion/98561-usb-computer-sound-quiet-silent-heres-what-do.html
  25. swervedriver

    Axe-Fx II "Quantum" Rev 1.00 Firmware Release

    Just got around to installing Quantum, coming from 18.11. Had to redo my drive block in all my presets (I use the Blues OD in front of the DoubleVerb), but as soon as I figured out how to get back into the same ballpark as before, it was an absolute joy. Y'know, for those scenes using that drive...
  26. swervedriver

    Is the Mk2 going to be considered out of date now?

    Now it's vintage.
  27. swervedriver

    1500 bucks, you say, Line6?

    ^ Because you made separate threads for them when this one already exists?
  28. swervedriver

    Resolution when using more than one amp.

    Amp modeling - Axe-Fx II Wiki Personally, I've never heard the difference between running a single or dual amp block setup (where in the dual amp setup one amp is muted, so that only the oversampling frequency is different for the active amp block). My first guess would be that the reduced...
  29. swervedriver

    Thank you Chris@AxeFxTutorials

    Nice one Chris, well deserved. Your MFC + SP1 Mission pedal tutorial video saved a bunch of time.. what, over 2 years ago now? It really helped me get used to MFC editing when I was just starting my Fractal journey. Very good to see you're still helping and troubleshooting the new as well as...
  30. swervedriver

    Loss of Gain and Sustain When using In Ears Live

    The CLR isn't a regular amplifier though.
  31. swervedriver

    What is your philosophy when updating?

    In the 2+ years I've had my Axe FX I've had to drastically retweak my patches maybe 4 times, only 2 of which have been firmware related. First time was when I updated from FW9 to 10 (which introduced MIMIC if memory serves me right). Second time was when I changed my Atomic Reactor cab to a CLR...
  32. swervedriver

    I DID IT!!!

    No terrible song is complete without a terrible video.
  33. swervedriver

    18.10 | Possible Citrus Bass 200 Bug [FIXED]

    Do you have a tremolo block or something in those presets? What about if you try it in a blank preset with just the amp + cab blocks?
  34. swervedriver

    Axe-Fx II Firmware 18.08 Released

    ^ Had that happen when I updated to 18.07 last weekend. I'm so behind the times. Thanks FAS! :)
  35. swervedriver

    Cab block preamps

    Love the insights in this thread. These cab preamp features seem to me like they could be a very nice addition for when I dive into recording stuff, so I just wanted to say I appreciate the shared 'starter' settings and learning about what to listen for. :)
  36. swervedriver

    "VALUE" knob set to output volume

    Push LAYOUT button Use the arrow buttons to select the AMP block Push EDIT button Push PAGE RIGHT button, this will take you to the Power Amp settings where the output level parameter resides Use arrow buttons to select the output level parameter (it's the one on the far right) Twist the big...
  37. swervedriver

    Axe-Fx II Firmware 18.07 Released

    It's not. It's all downhill from here.
  38. swervedriver

    AB/Y Panning effect with 2 cabs?

    Pretty sure scenes were introduced on the II, around firmware version 9 IIRC.
  39. swervedriver

    How to downgrade firmware?

    Since you have backups of everything, just reload the old firmware, then reload your presets. You'll most likely need to reinstall an older version of AxeEdit as well, but I'm unsure which versions correspond to which firmware revision. I don't think the MIDI controllers need downgrading. Other...
  40. swervedriver

    Volume and Wah will not work after 18.06

    Actually, I have noticed this behavior as well, but oddly enough not on all my presets: it was normal on some, and non-functional on others. I checked to see whether the controller assignments were still ok, and everything was still set up like it should be. MIDI signals were still being...
  41. swervedriver

    What causes 'hollowness' in modeling?

    Are you listening to your playing and your recordings through the same speaker?
  42. swervedriver

    Rant/Request

    I'm sure the djent kids feel sorry for inconveniencing you. ;) Then again, I might say the same about all the blues-noodly-pr0n-soundtracks that make up the other half. :-P The thread titles are usually clear often enough (IMO), no one's forcing you to listen to all the Axe recordings ever made.
  43. swervedriver

    Are we wrapped up in the tech of the axe fx

    This! Haven't said it enough, but reading posts about how everyone uses the Axe to sculpt their tones has taught me how to get the best out of it for what I'm trying to do. I like tweaking and discovering how things work, but for a limited amount of time. ;) Thanks everyone!
  44. swervedriver

    AXE XL to AXE II

    What? I hope one of the following statements answers your question. The XL can read patches created on the II. The XL does not save in the AxeFX II format; it uses its own format.
  45. swervedriver

    AXE XL to AXE II

    No.
  46. swervedriver

    Are we wrapped up in the tech of the axe fx

    During the week I'm usually away from my Axe FX, so then this place is a bit of a surrogate. ;)
  47. swervedriver

    Best way to combat digital high end w. Axe FX settings?

    I have a set of presets which are set up to sound good at gig volumes, AND a set of presets which sound good at recording / studio volume. Due to the Fletcher-Munson effect I find this much easier, rather than to try and compensate the same preset for one or the other situation. Maybe you would...
  48. swervedriver

    HISS

    Isn't this just... normal? Help and answers - Axe-Fx II Wiki
  49. swervedriver

    Is guitar dead in popular music ?

    Yes, god forbid. ;)
  50. swervedriver

    18.04 - Whoops

    Is power amp modeling turned on?
  51. swervedriver

    Friendly Suggestion For FW Updates From a Nerd

    Personally, I'm not going to wipe/reinstall my presets every time I upgrade just because something *might* go wrong. To me that sounds like uninstalling all my programs before running a Windows update. First I unplug anything that might send MIDI signals in the process (MFC / pedals). After...
  52. swervedriver

    Firmware 18.04 is soooooo GOOD!

    Upgrading from 17.x to 18.x did bork some of my presets as well, particularly due to the resets in the advanced parameters. I had several adjustments in the speaker page (low resonance frequency and level) to get the bass response I wanted while having the Cut switch enabled, trying to stay out...
  53. swervedriver

    FW v18.03 Review - 1st Gig with it :)

    I use a different scene where I 1) engage a PEQ block, which boosts the overall level by a few dB, provides a boost around 1kHz, and has some stricter lo- and hi-cut frequencies (140 Hz as the lower limit, 5500 Hz as the upper, IIRC) 2) increase reverb time and level (I run this block parallel...
  54. swervedriver

    Is it safe to use my Axe Fx II in vertical position?

    I regularly use it like that during rehearsals. It's turned on for ~4 hours, no issues.
  55. swervedriver

    Corellation between musical genre and death age, interesting

    Guess I'm prone to accidental suicide.
  56. swervedriver

    Saving Scene Changes

    I think you're confusing "scene controllers" with "scenes" in this explanation. Switching on/off blocks and/or changing a block's X/Y state is exactly what you'd use scenes for. If you want to change modify-able parameters within a block's X-state for different scenes, you could use a scene...
  57. swervedriver

    Rough guess as to when Fractal stops updating the II?

    Soon. ;)
  58. swervedriver

    Which cab for doubleverb ??

    From the UltraRes Samples folder that comes with the firmware downloads, try the OH_212_BOG-SH_FN-42_Studio-Modern cab. I've had almost no issues trying to dial it in with that IR.
  59. swervedriver

    What FRFR cabs do you use?

    The finish of the CLR can chip off pretty easily if you're not careful. Put it in a cover when moving it around. Sound-wise I have nothing but praise to offer, which is really the important aspect here. I can only comment on the Atomic side of things though, but I've read plenty of people being...
  60. swervedriver

    Hans van Andel (Vafam Sound, Rack Panels)

    Sad news to start the day with. I fondly remember the email conversations we had while designing what ended up to be my second greatest rack addition (after the Axe). Thanks for informing us.
  61. swervedriver

    Fw18... news?

    There will be.
  62. swervedriver

    Why do some people like to be so negative?

    I love this forum because of the wealth of information, tips, tricks, IRs and presets that people are graciously willing to share. In addition to that Cliff is regularly seen here to post insights, explanations and updates. But some of the flame wars that ignite in otherwise perfectly valid...
  63. swervedriver

    Karnivool

    Seeing them live in two weeks. Should be good! :)
  64. swervedriver

    Reverb time parameters -where do you run yours?

    Cleans and solos are 3-4 seconds, rhythm stuff around 1 second. I run my reverb block in parallel though, so there's some level reduction as well: -4 to -8 dB for my long reverbs, -20 dB or so for rhythm stuff.
  65. swervedriver

    Now we just need Neil

    Finally my favorite band is following *my* example. :D
  66. swervedriver

    Axe-Fx II Firmware 18.00 Public Beta

    Updated last Saturday. I don't know what it is but it sounded more pleasing to me, even though it reset the advanced parameters (particularly what I had on the speaker tab) so it initially my presets sounded a bit thin. I dialed those settings back (LF around 120 Hz, LF level around 6.5) but...
  67. swervedriver

    What is it about the OH Bogner 2x12 Fane UR IR?

    My go-to IR for everything clean or clean-ish. Got it by buying the 2x12 pack from OwnHammer some time ago, but it's great to see it available for everyone to enjoy. :)
  68. swervedriver

    Atomic NEOs - Playing programme music and BASS response

    I think the numbers on the website are there to indicate the flat response spectrum. So, possibly you can try boosting some low frequencies of your backing tracks to get the thump you have in mind.
  69. swervedriver

    Axe-Fx in Nederland en België

    Ik ben slecht bekend met de Ultra (heb een II Mk2), maar werkt die ook met .syx IRs die je in de II/XL kunt laden? In dat geval zou je naast de bassectie ook de IR sectie even moeten doorbladeren (heb wat links hieronder gezet). Er zijn daar afgelopen jaar een aantal IRs van bascabinetten...
  70. swervedriver

    Metallica's "St Anger" album re-recorded with modern production...

    Some kind of table.
  71. swervedriver

    One Shot From Your Last Gig - Bar/Club/Hall/Stadium/Bedroom

    From last summer. I'm the one on the right. Not pictured but further to the right is my Axe rack with CLR resting on top.
  72. swervedriver

    Fractal

    Fractal - Uncyclopedia, the content-free encyclopedia
  73. swervedriver

    Updating from v14 to v16. Anything I should know/do?

    I did the same last weekend, also from 14.02 to 16.02. Just hit update all amps prsts in the Utility menu once you've loaded the new update to set all the advanced parameters to default values. If you've fiddled with those, copy the affected values down somewhere. But, with the new modeling you...
  74. swervedriver

    Bug? reverb time modifier not playing well with increased reverb time?

    I'll have a go at the newest firmware next weekend (I have to keep myself away from the Axe during the week, or I'd never get my thesis finished, lol). I tried reinitializing the block, but at the time I don't think that was the result I was looking for due to the modifiers I'm using. Since I...
  75. swervedriver

    Bug? reverb time modifier not playing well with increased reverb time?

    I updated from FW 14.02 to 16.03 today (only just saw 16.04 out, so maybe this is outdated already). I noticed all my reverb times (studio type) were suddenly at values which I didn't set them at. The knob position seemed unchanged, just the value it displayed was significantly higher (eg. 2.50...
  76. swervedriver

    Ownhammer 1x12" and 2x12" studio libraries are now complete

    Thanks for the heads up!
  77. swervedriver

    Axe II...and the new CLR.

    Interesting that you found your presets to be bass-heavy coming from the Reactors. When I switched to the CLR from the Reactors I found I really needed to dial back the treble as everything sounded relatively thin and screechy. Then again, I already cut everything below 100 Hz like a maniac, so...
  78. swervedriver

    Note definition tips?

    Maybe turn up the Bright parameter a bit?
  79. swervedriver

    Atomic FRFR, and CLR questions.

    -Dispersion is fine for me; actually much better than the active Atomic Reactor cab I had before (probably the last incarnation, I dunno how many versions there may have been). I usually play in my apartment living room and a reasonably small rehearsal space, so it's not like I have a lot of...
  80. swervedriver

    Guitar Picks, What do you play?

    Dunlop Manufacturing :: Guitar Picks :: :: Max-Grip Don't think I ever dropped a pick after switching to these from the regular Nylons. I use the .88 variety.
  81. swervedriver

    FRFR Users: How much does the quality of the FOH system matter?

    I am an FRFR guy, own a CLR and run direct to FOH (no PA system of our own). What I care most about is that the sound I send to FOH is as good as I can make it, whatever happens next to it I cannot control. What I hear on stage is consistent and helps me focus on my playing, what the audience...
  82. swervedriver

    How many cabs are you using?

    I use that one for cleans and almost-cleans, I use one of the HighGainEssential Mesas in combination with my Friedman BE and FAS Modern sounds. So 2 in all.
  83. swervedriver

    5 Artists that are you

    Rush Devin Townsend Queen Dire Straits Nirvana
  84. swervedriver

    Why Is My CPU Usage So High?

    Lower the echo density in your reverb blocks if you absolutely need both of them, or consider changing one (or both) to a lower CPU-intensive type.
  85. swervedriver

    Announcing the OwnHammer High Gain Essentials

    ^ In that case I'll throw in my tentative vote for the Mesa CH16. To my ears they have a bit more mids than the CH8 and sound a little more "open" than the EN (which sounds slightly box-y to me; I can imagine it working well in a mix though). Tested with my FAS Modern patch on an Ibanez RG7 with...
  86. swervedriver

    Announcing the OwnHammer High Gain Essentials

    I noticed on facebook that Kevin linked to this Soundcloud comparison. No idea if it's from a member on here, but in any case I was thoroughly impressed. Think I'll pick up the Mesa's today or tomorrow! https://soundcloud.com/arsafes/sets/ownhammer-high-gain-essentials-ir-test edit- Maybe...
  87. swervedriver

    Fletcher-Munson

    Since you're talking about boosting mids, I assume you dialed in your presets at low volume? Going by this, I'd say boost around 3-4 kHz and perhaps a small dip at 1500 Hz. Basically, creating the inverse of those curves. How many dBs you need to boost depends on whatever volumes you're cranking...
  88. swervedriver

    Ovation Guitars To Cease US Production.

    I have a CP 247 I bought second-hand 7-8 years ago as I needed an electro-acoustic solution. I bonded with it in the shop, although I did make a slight modification not too long ago... It's a piece from a car's old floormat. Works great. :D
  89. swervedriver

    is it ok for axe to work while standing on the side?

    I've played several rehearsals with the Axe's display facing towards the ceiling. I imagine it's no problem either when it's on its side.
  90. swervedriver

    Clean to "clean-with-a-little-hair" discussion

    I'm using the DoubleVerb combined with the one of the OwnHammer 2x12 Bogner IRs (UltraRes version of the Scott Peterson mix of the Fane speaker). Using it for all my guitars (Ibanez RG7, a Tele with coil-tappable humbuckers and an HSS Strat). Input gain no higher than 3 for cleans. EQ fairly...
  91. swervedriver

    Help!

    Did you check the new global noisegate parameter (in the Global menu)? Updating to v14.xx sets it to -40 dB, maybe that's what's going on.
  92. swervedriver

    So: What is the best way to make your guitar sound like a bass?

    Set the pitch block tracking mode to mono instead of poly (it works better for large pitch shifts and single notes). Also throw a compressor in there.
  93. swervedriver

    FASLINK™ Adapters are here!

    It would be cool if the XA-1 could be integrated in my Vafam frontpanel. Would save a redundant connection that way. :) Ethernet/-CON hasn't failed me thusfar, but it's good to have an alternative option available.
  94. swervedriver

    Anyone Using the Kalthallen IRs?

    Nope. I'm all for factory UR IRs in their place.
  95. swervedriver

    Bug? Bug in "Controllers" window (NOT A BUG)

    If you select the wheel (left-click with the mouse) you can use the arrow keys to adjust the values (and/or hold down the control button simultaneously for finer adjustments).
  96. swervedriver

    14?

    I like to plan ahead. ;)
  97. swervedriver

    POLL for Week 2 of AOTW

    I believe one of them plays in some odd open B-like tuning. I seem to recall B F# B F# B E, but I might be fully wrong of course. :)
  98. swervedriver

    ...if you are serious and just on another planet as far as musical tastes go...

    Clap your hands?
  99. swervedriver

    The bright knob is killer

    Late to the party as ever, but I agree that it's pretty damn awesome. Had a go with it on my presets last night and I was easily clarifying some of the low end without making the highs too piercing (even dialed back the treble and presence a tiny bit). Pretty sure this will work wonders in band...
  100. swervedriver

    How download Ultra IRs

    Another option would be to use AxeCabManager (in AxeEdit). Simply drag and drop.
Back
Top Bottom