Search results for query: *

  1. D

    Marshall 1960BV impedance?

    The York Audio MRSH 412 MV30-Dual Cab Pack is based on a 1999 Marshall 1960bv 4x12 cabinet loaded with the original Celestion Marshall G12 Vintage (Marshall OEM V30) speakers. I highly recommend this IR pack! I don't know if its cool or not to post what Justin recommends without his OK?
  2. D

    AFIII Prayer - Music by Me - (sometime few notes are nice :))

    That is Beautiful!
  3. D

    Axe-Fx II/III with my Synergy SYN2/50/50

    Your screenshot is very helpful, I'm going to try that as a template. Thanks, I might bug you again. Lol!
  4. D

    Axe-Fx II/III with my Synergy SYN2/50/50

    Digging up an old thread. If you also wanted to also use the Axe's Amp Block and use your monitors, how would the routing change?
  5. D

    Axe-Fx III Firmware Release Version 19.00

    I had a chance to try out your preset last night and it sounds great through my set-up. I’m simply running the Axe straight out to a pair of Adam A7x’s. What is the IR you used attached to the bundle? I’ve never actually tried to record anything, I have work on that as well.
  6. D

    Axe-Fx III Firmware Release Version 19.00

    TU!
  7. D

    Axe-Fx III Firmware Release Version 19.00

    Would you mind sharing this preset, sounds great!
  8. D

    AFIII One of my favorite lead tones so far for neck pickup

    I smiled thru the whole thing! That was great!
  9. D

    Block Library Delay Issue

    Coming from Firmware 14.00, that explains it. I'll re-do my Library. Thank you!
  10. D

    Block Library Delay Issue

    Not sure if this is bug or a change with the new Firmware. I did a refresh after new FW. When I call up a saved Delay in the BLOCK LIBRARY @ 500ms for example it reads 999ms. 234ms reads 467ms, etc… It doesn’t matter what Delay type of Delay, does it with all different types.
  11. D

    Wish Tone King Imperial Mark Knopfler Amp

    Not sure if this is the same amp Greg Koch uses on a lot of the Wildwood demos, love his tone on those. Thanks for sharing the preset.
  12. D

    Axe-Fx III 16.00 Beta 12 "Cygnus" Firmware - Public Release Candidate

    Doubleneck said: Found a possible glitch on the USA Lead Mid Gain, It’s louder than the other USA Lead models, it wasn’t like this prior to Cygnus. I attached a preset, switch between the four USA Lead Models scenes as an example. My post was meant to be constructive, obviously you can turn...
  13. D

    Axe-Fx III 16.00 Beta 12 "Cygnus" Firmware - Public Release Candidate

    Found a possible glitch on the USA Lead Mid Gain, It’s louder than the other USA Lead models, it wasn’t like this prior to Cygnus. I attached a preset, switch between the four USA Lead Models scenes as an example.
  14. D

    FM3 1st Song in 14yrs ... FM3 Princeton/Plexi

    That was very well written, I'ld buy that in a heartbeat!
  15. D

    Just updated my Mac computer to the new macOS Big Sur 11.0.1, I am letting all of you be aware..

    Anyone figure how to get rid of it?
  16. D

    Backing up from an empty preset

    I’ve noticed on several threads, comments about refreshing from an empty preset or backing up from an empty preset. I tried backing up from an empty preset for the heck of it and to my surprise the backup was twice as fast. Are there any negatives to backing up this way?
  17. D

    AFIII Marco Sfogli - "Seven" Cover

    Fantastic playing and tone, tell me about that Suhr! Thanks for the preset!
  18. D

    JP-2C Gain and Presence Pull question.

    I’ll give that a try. Thanks.
  19. D

    JP-2C Gain and Presence Pull question.

    On The JP-2C Yellow: Gain defaults Input Drive to 2.90 Overdrive to 5.00 on the Ideal tab. On the JP-2C Red: Gain defaults Input Drive to 5.70 & Overdrive to 5.00 on the Ideal tab. I’m guessing you adjust Input Drive to on the Ideal tab accomplish the Pull Gain setting on the amp & use Presence...
  20. D

    Has the Hold Function Changed?

    I meant Brilliant to you, i just set it up as you described and it works exactly how I want it to work. THANK YOU!!!
  21. D

    Has the Hold Function Changed?

    On the Hold Function Execute Mode I have it set to SWITCH UP Hold Function Execute Mode Brilliant, does exactly what I want it to do! What I don't understand is that's how it used to work? Thank you!
  22. D

    Has the Hold Function Changed?

    I have access to all 8 Scenes, but to go from SCENE 1 to SCENE 8, I have to tap SCENE 4 then Hold SCENE 4 to access SCENE 8 if that make sense. Before it worked the way I described above?
  23. D

    Has the Hold Function Changed?

    I have SCENE 1 button set-up to toggle between SCENES 1/5, SCENE 2 button set-up to toggle between SCENES 2/6, SCENE 3 button set-up to toggle between SCENES 3/7 & SCENE 4 button set-up to toggle between SCENES 4/8. For example: If I’m on SCENE 1 I used to be able to hold SCENE 4 button down...
  24. D

    Has the Hold Function Changed?

    This is an 8 Scene Fender amp set-up. I used to be able be in Scene 1 and then by holding and releasing button 5, switch between Scene between SCENE 1 & 8, what has changed to get it working that way again.
  25. D

    [BUG] Hold function issue

    Understand the problem now, mines doing the same thing.
  26. D

    [BUG] Hold function issue

    I use the SCENE preset Layouts. Try how i have S7 set-up, it does what your asking Tap On/Off for Chorus, Hold for Pitch, Hold to turn Pitch off. S5 S6 S7 S8 Layout 2: SCENES 2: SCENES 2: SCENES 2: SCENES Switch Ring Color Default Default Default Default TAP FUNCTION...
  27. D

    FC-12 8 Scenes and 4 IA Switches

    Here's a screen shot of the FC-12
  28. D

    FC-12 8 Scenes and 4 IA Switches

    Yes, I'm already using the Hold functions for: Switch S7 = Chorus On/Off Hold Switches A/C Switch S8 = Delay On/Off Hold Switches A/C
  29. D

    FC-12 8 Scenes and 4 IA Switches

    I am, I'm using S5 for Preset -1, S11 for Preset +1, S6 for Tap Tempo and S12 for Tuner.
  30. D

    FC-12 8 Scenes and 4 IA Switches

    I don't understand?
  31. D

    FC-12 8 Scenes and 4 IA Switches

    Currently I have set the FC12 up as Factory Default Layout 2: Scenes Switch S1 = Scene 1 Switch S2 = Scene 2 Switch S3 = Scene 3 Switch S4 = Scene 4 Switch S5 = Phaser On/Off Switch S6 = Flanger On/Off Switch S7 = Chorus On/Off Hold Switches A/C Switch S8 = Delay On/Off Hold Switches A/C Every...
  32. D

    2290 W/ Mod help

    I'll give that a try. Thanks!
  33. D

    2290 W/ Mod help

    There wasn't any settings for ping-pong you could only select it or not select it.
  34. D

    2290 W/ Mod help

    Yeah, it sounds spot on, I'll try ping-pong and see if sounds the same.
  35. D

    2290 W/ Mod help

    I’m trying to replicate a 2290 W/Mod preset from the Axe-Fx XL+ to the Axe-Fx III. In the XL+ the 2290 W/Mod used to have a configuration page (no longer there on Axe-Fx II) that you could set to Ping-Pong. I saved the block in Blocks Library and ported over to the III using FracTool. Screen...
  36. D

    New capture method with FREE Greenback IR

    Hi 2112, Would you mind sharing the Friedman HBE 2018 C45, Soldano SLO 100 Lead, Vox AC30 & the Fender Vibrolux presets you used in this video. They sound great! Thanks
  37. D

    Yek's Organ (preset)

    Awesome! Thank you.
  38. D

    AFIII Chorus

    Thanks for posting the preset, sounds great!
  39. D

    How to copy scene 1 to all other scenes?

    Don't know about the front panel, but you can do it with Axe-Edit III. Click on the Scenes arrow that is pointing down, go down to Copy. Gives you a selection of Scenes to Copy.
  40. D

    TriChorus

    Cool, thanks for posting I have to check this out!
  41. D

    Quad Chorus

    That would be great, since the Tri-Chorus's parameter's don't match up at all with the Quad Chorus's parameter's. I have no idea how to replicate the Quad Chorus settings to the Tri-Chorus. I'm just peeing into the wind...LOL
  42. D

    Quad Chorus

    This is the effect Im trying to re-create
  43. D

    Quad Chorus

    OK will do Thanks!
  44. D

    Quad Chorus

    Where is the Quad Chorus located on the Axe-Fx III?
  45. D

    Axe-Fx II XL+ Preset Banks

    I downloaded it the other day and its been fixed.
  46. D

    Axe-Fx II XL+ Preset Banks

    Can you download the XL + Preset Banks and see if you get the same?
  47. D

    Axe-Fx II XL+ Preset Banks

    When I try and download the preset banks for the XL+ they are dated December 11, 2012? Preset Banks A, B and C Zip Archive—Jul 13, 2017 Factory preset banks for Quantum 8.02 or later. Please use Fractal-Bot to install these banks.
  48. D

    Hans Zimmer Inception Dream Is Collapsing GUITAR COVER

    Very well done...Does the Batman light actually work?
  49. D

    '80s Lifeson tone Q - PCM80?

    I did, it's the last attachment.
  50. D

    '80s Lifeson tone Q - PCM80?

    Started working on a Rush GUP preset since you started this thread. I’m basically using the template I use for all my presets. My workflow is more basic than yours. I attached pics of the amp, chorus, cab and delay settings. The Chorus is I believe from Azael's Tri Chorus preset. The first Delay...
  51. D

    FLANGER Settings!!

    If your referring to the flanger in the ADA 2FX Digital Multi Effects I would also be greatly interested.
  52. D

    '80s Lifeson tone Q - PCM80?

    If you come up a preset please share, been dying for a Grace Under Pressure preset.
  53. D

    Marshall JCM 800 2210

    Thank you for all the suggestions, gives me plenty to work with!
  54. D

    Marshall JCM 800 2210

    Used to own this amp, I’m trying to replicate the tone. I know this amp is based on a JCM 2203 with a Diode Circuit, kind of a cross between a 2203 and a Silver Jubilee. What’s the best amp model to use and what advanced settings should I adjust to replicate this model?
  55. D

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    I like the new firmware, I’ll try those settings with clean/ crunchy tones.
  56. D

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    I’ll give that a try, only tried it with higher gain tones.
  57. D

    Axe-Fx II "Quantum" Rev 9.00 Firmware Release

    New firmware sounds much better when it’s set to 0. I don’t get why it defaults to 3, sounds muddy.
  58. D

    Low Cut, High Cut

    Cliff quote “My personal settings are Low Cut around 80 Hz and High Cut around 7500 Hz and Filter Slope set to 12 dB/octave but these are just a starting point.” What is the difference between the Filter Slope set to 12 dB/octave vs 6db/octave?
  59. D

    Sign In Stranger - Steely Dan

    Walter Becker would be very proud. 2 thumbs up!
  60. D

    Blank Presets

    Thanks for the explanation.
  61. D

    Blank Presets

    Why do some of my empty presets show up as blank and others say <EMPTY> ?
  62. D

    SOLO 100 = AWESOMENESS

    Thank you! I'll try it out tonight.
  63. D

    412 Recto Player Pack by OwnHammer

    My go to IR pack has always been the Fractal Cab-Pack-3-OwnHammer-Studio-Mix-UltraRes-Edition. I just purchased the OwnHammer 412 MAR Green Vintage Player Pack & the OwnHammer 412 Recto Player Pack. Money well spent, very easily laid out and sound better than my favorite Cabs from Cab Pack 3...
  64. D

    SOLO 100 = AWESOMENESS

    Please share the preset!
  65. D

    Axe-Fx II "Quantum" Rev 8.02 Firmware Release

    The main reason I upgraded to the XL+ was to have the extra space for presets and user cabs, and I don't regret it other than its taken some time to rearrange all my presets and cabs in an order that makes sense to me and easier to find. btw you aren't missing much by not having the missing IR's...
  66. D

    Singtall Superpack of presets are ready!

    Thanks, how about the EVH Mean st IR, theres no patch named EVH Mean st? Your presets are very good. Highly recommended.
  67. D

    Singtall Superpack of presets are ready!

    Just purchased your Superpack, for the Axe-Fx II. There's 3 cabs in the Cab Folder, no explanation what they are used for?
  68. D

    Gig Video-Bark at the Moon

    Awesome playing and tone!
  69. D

    Dimed Real Plexi VS Dimed Simulation [Q8.01]

    Would you mind sharing this preset?
  70. D

    412 Recto Player Pack by OwnHammer

    I realize this is a Mesa cab, Which V30 speakers are in a Marshall AV1960 & BV1960 cab?
  71. D

    EVH Flanger pedal

    My version was taken from Yek's suggested settings after the Flanger was changed in I believe FW 18.0, sounds really close to me. Place it before the amp block.
  72. D

    EVH Flanger pedal

    Try this Flanger preset.
  73. D

    we're playing on TV tonight

    Break a string!
  74. D

    Serial vs Parallel Delay settings

    Thank you and everyone else for all the help and responses.
  75. D

    Serial vs Parallel Delay settings

    o_O
  76. D

    Serial vs Parallel Delay settings

    Thank you!
  77. D

    Serial vs Parallel Delay settings

    First of all I appreciate all the input and responses. Both generic presets Serial and Parallel presets are attached. Maybe I'm missing something in the translation. The serial has a lot more delay. I need to convert about 40 presets which is why I'm asking. Thanks
  78. D

    Serial vs Parallel Delay settings

    ;)
  79. D

    Serial vs Parallel Delay settings

    Hey Moke, I'm also using another Delay block in parallel, I didn't show the entire preset, just trying to understand how it works. thanks for the tip on set your bypass mode to 'Mute Fx In'
  80. D

    Serial vs Parallel Delay settings

    I’m confused, my original question was how do I get the parallel delay block to sound the same as the serial delay block that is set to 15%. They are two separate presets. On the parallel I have the Mix set to 100%, do I set Input gain to 15% and adjust Level to be the same as the other...
  81. D

    Serial vs Parallel Delay settings

    I'll check it out tonight thanks.
  82. D

    Serial vs Parallel Delay settings

    Hey chris & Rex, really appreciate the quick response. I am running the Mix in parallel at 100%. I'm adjusting the Input gain to try and achieve the same amount of delay as in serial.
  83. D

    Serial vs Parallel Delay settings

    When I compare a serial delay preset that is set to 15% the parallel delay that is also set to 15% has quite a bit less delay. Is there a quick way or a formula to convert a serial delay that’s set for example to 15% and get the same amount of delay for the parallel version without having to...
  84. D

    [Not a bug] 7.02 Default Out Comp Threshold & Out Clarity Question

    Must be a bug, reloaded 7.01 and it doesn't default every amp on the Out Comp Threshold to -60.00 db and the Out Comp Clarity to 0.00 on every amp.
  85. D

    [Not a bug] 7.02 Default Out Comp Threshold & Out Clarity Question

    Thanks yek, I downloaded your presets and the the Out Comp Threshold is set to -30.00 db and the Out Comp Clarity set to 6.51 on every amp. Which is why I’m asking the question.
  86. D

    [Not a bug] 7.02 Default Out Comp Threshold & Out Clarity Question

    When I change from one amp to another or reset any amp the Out Comp Threshold defaults to -60.00 db and the Out Comp Clarity defaults to 0.00 on every amp. Can anyone check if yours does the same or verify if that's correct?
  87. D

    7.02 Default Out Comp Threshold & Out Clarity Question

    When I reset any amp the Out Comp Threshold defaults to -60.00 db and the Out Comp Clarity defaults to 0.00 on every amp. Can anyone check if yours does the same or verify if that's correct?
  88. D

    Axe-Fx II "Quantum" Rev 7.00 Firmware Release

    I had the same question and ETOLKIEN was nice enough to help me out. Here is his response. You can download the Firmware zip for Mark I/markII users. Inside this zip there are a folder called "UltraRes Samples" that contains these cabs. The reason for this is that MarkI/II devices have 132...
  89. D

    Axe-Fx II "Quantum" Rev 7.00 Firmware Release

    Crap, Cab #146 and Cab #149 are two goto cabs, anyway to get them in a separate download?
  90. D

    Axe-Fx II "Quantum" Rev 7.00 Public Beta #2

    Another +1 for cab 62.
  91. D

    Somebody please convince me to NOT buy an Axe FX with my tax return.

    I just bought one and I'm not going to talk you out of buying one. :)
  92. D

    Axe-Edit 3.12.0 Released

    What's the difference between Auto Trim & Min Phase and why would you use one vs the other?
  93. D

    Dokken - Into The Fire SOLO COVER w/ patch [Friedman BE fwQ6.02]

    Killer playing and phrasing! What monitor speakers and wedges / isolation pads are you using? THX for the preset.
  94. D

    awww yes! the marshall silver! (Q6)

    Love your playing on this, nice and different!
  95. D

    New FAS Video w. Larry Mitchell + Free Presets!

    Love your playing. Thanks for the presets Larry and FAS!
  96. D

    Axe-Fx II "Quantum" Rev 6.02 Public Beta

    Is this the IR your using sounds great! https://www.cabir.eu/en/sigis-finest-uk-collection/7-speaker-cabinet-impulse-response-cab-ir-library-marshall-mr-cb71g12m25.html
  97. D

    Mark IIC+ Tips

    Wish you would post more suggested settings like this. These settings are freaking great!
  98. D

    FYI Univibe is pretty damn good...

    Lol! I was looking for a thread with Univibe in the title. THX
  99. D

    FYI Univibe is pretty damn good...

    Would you be so kind as to direct me where these are posted, I can't find them?
  100. D

    FracTool - for power users only

    Thank you, I never would have guessed that's a menu.
Back
Top Bottom