Search results for query: *

  1. javajunkie

    Wish Ability to save modified speaker impedance curves / lock Speaker tab settings

    It would be really sweet if this could be accomplished.
  2. javajunkie

    Can I "save" the Speaker tab (Impedance Curve) settings?

    Funny, I was just thinking it would be really cool to be able to do this.
  3. javajunkie

    A Marshall sim that stays clean

    I have an old JCM800 with a low and high input. Iloved the sound of the low input. I found the same thing as other said here. Turning down the input trim to .5 emualted the low input nicely. I use the input trim on some of the Class A type amps to reign them in a bit as well.
  4. javajunkie

    Axe-Fx III MKII vs Axe-Fx III MKII Turbo

    Yes, I am not running up against CPU limitations on my Kitchen Sink ambient presets. And the extra cpu is nice when you are using the FullRes IRs. But they sound the same, turbo or non.
  5. javajunkie

    A Difference between 16.05 ...And 17.02 .... An Explanation ???

    It doesn't do anything here. Changing the level while bypassed doesn't do anything here. I even took the level from -20 to 20, no difference. Now when my bypass mode is set to mute fx out and my mix is less than 100% it does, but that is expected behavior.
  6. javajunkie

    Wish Allow controller assign for Chorus Delay time.

    That is how a chorus works. Delay time is modulated by an LFO. The delay time on the Axe-fx sets the minimum delay time, The depth the amount of difference between the min and maximum delay (higher depth = greater max delay). For more precise control over the depth of the delay set the auto...
  7. javajunkie

    From Leon Todds Cave: Boss CE-1, ADA MP-1 Chorus & Eventide micropitch

    More like a ring mod and drive. The intermodulation when you push the preamp goes into ring mod territory :). Crank the preamp and play root and Maj7th interval (chorus off), neck pickup. Then slowly bend the M7 to the tonic.
  8. javajunkie

    From Leon Todds Cave: Boss CE-1, ADA MP-1 Chorus & Eventide micropitch

    I have a CE-1 as well. I made measurements on it before and matched it to the Axe-Fx II years ago. I can certainly capture and send you the data.
  9. javajunkie

    FW 17.01 Demo - Full Res IR, New Plex Delay Blocks - Free preset

    Nice!
  10. javajunkie

    Parallel chain with shunt adds gain ?

    If you are talking about just one effect in parallel , they can sound exactly the same whether in series or parallel. Rather than rehash the discussion, you can read why and how here: https://forum.fractalaudio.com/threads/reverb-in-serial-vs-parallel.175082/#post-2123636
  11. javajunkie

    Parallel chain with shunt adds gain ?

    You can also just increase the input trim, or use the input boost for preamp boost, for postamp you can just use the level on the amp. You attach the levels to a control, pedal, or external switch for toggling.
  12. javajunkie

    Parallel chain with shunt adds gain ?

    You can also use a multiplexer block that way only one patch is active at a time. If you want to run them in parallel at the same time you can use a mixer block.
  13. javajunkie

    Yamaha SPX90 Symphonic + Pitch B & C

    Sounds sweet. Awesome job. Is there any particular reason you used the Dual Chromatic for the pitch instead of the detune. You have tracking off and are not using any of the parameters that are not available in the detune? The detune sounds virtually identical and save a little cpu.
  14. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    A full powered Axe-fx III turbo floor unit would be so killer!
  15. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Also, 1/2 of it is to do it, just because I like experimenting.
  16. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Less than my rack I was using :). I don't really know. More awkward than heavy. But I just put it in a Keyboard case that has wheels and I can roll up the stairs in/out of the SUV and on to the stage w/o having to lift it (save in and out of the case). I will have to fortify some of the case...
  17. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Well it does Song, Setlist Modes. and does continuous CC control of 3rd party devices along with syncing MIDI clocks. But.... it really only does one thing. It Keeps me from having to haul the rack I had before. So pack up, setup, and takedown time is much reduced. Plug in power and 2 XLRs and...
  18. javajunkie

    issue with mk2 Turbo and Mastermind GT

    It working fine with my Turbo.
  19. javajunkie

    Axe Fx III vs. vintage 80s Rack

    The one in the release candidate firmware thread. https://forum.fractalaudio.com/threads/axe-edit-iii-1-10-03-to-support-fw-17-01-release-candidate.177727/
  20. javajunkie

    Axe Fx III vs. vintage 80s Rack

    Did you update Axe-Edit as well? It is the first choice under the Multitap delay. The updated Multitap delay is absolutely glorious. There is SOOOOO much can do with it, The YA YA Delay is a blast. The 1210 sound fantastic. I cut the delay times way down and it gets a great sparkle type chorus...
  21. javajunkie

    issue with mk2 Turbo and Mastermind GT

    I can try on my MMGT/22
  22. javajunkie

    Axe Fx III vs. vintage 80s Rack

    Looks like you accidentally deleted it. I undeleted it for you.
  23. javajunkie

    Axe Fx III vs. vintage 80s Rack

    With the 1210, it really depends what you are trying to do. It has a lot of features as a chorus, flanger, and enhancer. It is basically 2 chorus/flangers that can interact with each other. There are some presets out there that capture particular settings. Either using a dual chorus or...
  24. javajunkie

    humbuster cable and noisegate offset question

    I would not use the humbuster cable for the wireless to Axe-fx input. As has been said, it is not designed for that. Just use a decent quality unbalanced cable for that. As far as the offset, that is a global offset. So if you are playing at a venue and say the lighting in the place is causing...
  25. javajunkie

    Axe Fx III vs. vintage 80s Rack

    Well the Tri-Stereo Chorus in the Axe-fx was based on mine. I have a a Tri-Stereo Chorus , TC2290, TC1210, Eventide H8000 and Eclipse, several preamp/poweramps,,plus a bunch of other gear that I have built many racks with. I wouldn't even want to think about having to haul that stuff around...
  26. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Took it to rehearsal last night. It worked out great. Easiest set up and take down I've had in a very long time.
  27. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    yep
  28. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    This is for my Worship Rig. Chimey tones with lots of Delay and Ambience.
  29. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Lighter than my 40lb rack :) + Pedalboard w/ controller. And then have to hook the controller up to the pedalboard and hook up the power and cables from behind the rack (all the cables plug into the side of the pedalboard now). The case I have is wheeled so I don't have to lift the rack other...
  30. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    I used a pedalboard and a rack before. Now Just a pedal board, so much more portable and lighter. The pedalboard is all I need to pack. Putting it together and programming was the hard part.
  31. javajunkie

    How high with CPU have you gone and been stable?

    FM9 has a little less wiggle room. Anything over 84% and a spike could cause a drop out. On the III I could go to 90%.
  32. javajunkie

    Axe-Fx Firmware Release Version 17.01 Public Beta

    Nice, preset that was at 90% on 17 is at 85.5% now.
  33. javajunkie

    Axe-Fx Firmware Release Version 17.01 Public Beta

    Awesome!
  34. javajunkie

    How high with CPU have you gone and been stable?

    I will add the caveat that FM9 edit gets REALLY sluggish when I get about 82% or so.
  35. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Not three amps, 2. Bassman and Buddha (panned L/R at ~50%. FM3 is mostly for Plex Verb (kills CPU) and additional pitch shifter. In other words for processor overload. Plus it gives extra Delays. Actually, none of my delays are in the Volante, yet. I'll use it for Binson Type or really gritty...
  36. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    I just checked a couple that were at 90%. They went down to 73%. So that is ~ a 19% in DSP reduction. The % numbers went down from 90% to 73%, so -17% in reported use. .
  37. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    Hit refresh, I noticed that when I posted. Should work now.
  38. javajunkie

    How high with CPU have you gone and been stable?

    83-84%
  39. javajunkie

    Finally got the new FM9/FM3 Pedal board put together

    It took longer than I wanted (need new power brick and lots of interconnects, but it turned out well. . RJM Mastermind GT10 controls everything. Up top are the FM9 and an FM3. Other effects are EHX Hog 2, Strymon Sunset Overdrive, DanElectro Transparent OD (same as a Timmy), and Strymon...
  40. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    My presets that we on the edge of overloading showed about a 15% reduction in CPU on the Turbo.
  41. javajunkie

    Only one pitch block...Very Disappointed

    I use the Ring Mod over the Pitch Octaver on the III as well as the FM9. I like the way it sounds better.
  42. javajunkie

    How to use Axefx with two line 6 rackmount wireless receivers ? Help please

    I use a G75 and 2 transmitters . I can have multiple scenes on the G75 and I have the footswitch connection setup for MIDI control. This lets me cycle through scenes. On each scene I can specify to use any combination of outputs A, B, and C. Each scene can use a different (or same) channel, set...
  43. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    That is not entirely correct, You can use FullRes IR on the non-Turbo version w/o Maxing the CPU. But, it does use more CPU than an Ultra-Res cab. The extra 25% can be used for whatever you want. I am running many presets at near the limit on my MK I. I actually had to take some effects out to...
  44. javajunkie

    What would you use an external switch for?

    I am using a Trio 3 for the FM3, FM9, Mastermind GT10 + a cople of other effects right now. I have a couple of drives, EHX HOG, Strymon Volante, and a Line 6 G75 wireless. I am also using a RJM mini effects gizmo for audio loops. I have a Strymon Sunset on the way to replace the two drive pedals...
  45. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    The FM9 has 4 Cores. One core is dedicated to reverb, One Core to delay,and ,most likely, one for the amp block, and one for everything else.
  46. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    That is a good point
  47. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    More CPU %. Doesn't have to be blocks. I have a number of presets I can consolidate into 1 with just a little more CPU under the hood.
  48. javajunkie

    Announcing Axe-Fx III Mark II TURBO

    Turbo mode will be here Sat according to UPS tracking.
  49. javajunkie

    Possible Bug - Could someone validate this - Scene Display with MIDI

    I cant seem to get the Display Screen on the FM9 to show the Scene I am on when I change it via MIDI. The Scene change happens, the ring lights light up the correct scene I change to, but the large display scene does not reflect the change. It doesn't matter if the cc#/value is sent from my...
  50. javajunkie

    Set tempo per song on the GT22

    I have my Tempo set to Song on my Mastermind. Then I set the song tempo. For the Tap Tempo button I have Send on Preset Off, Update on Preset on. I also have show tempo on and flash with tempo on.
  51. javajunkie

    What would you use an external switch for?

    Momentary switch for reverb/delay holds or on/off for one off effects or effect chains
  52. javajunkie

    Set tempo per song on the GT22

    I have it working on my GT22
  53. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    So I am getting Scenes names and Tuner info to the Mastermind through the FM3 until the mastermind get FM9 support. I managed to get the Cool Cat Transparent OD, Keeley Super Phat Mod, EHX Hog 2, in a GRX4 looper to in/out 3 on the FM9. So loop1 goes to cool cat, look 2 to Keeley, loop 3 to Hog...
  54. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    No SPDIF in on the FM3. Putting in the FM9 as an effects loops. I can put it anywhere in the signal chain.
  55. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    I got the FM9 and FM3 running together. I have the FM3 SPDIF out going to FM9 SPDIF In. And, FM3 out 2 to FM9 input 2. Seems to work great.
  56. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    Because the FM9 does not have song/sets and does not output midi CC values from an expression pedal. Mostly the song/set info.
  57. javajunkie

    Ooooh... Charts and Graphs Redux

    Would the FM9 be closer to the FM3 or the Axe-FX III?
  58. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    Don't need three amp set up, but for freeing up cpu for drives, plex delay, and pitch shifter. The FM3 will take up smaller space than what I would put in its place. The fm9 and fm3 will all be controlled with a midi controller, so it should be easy to manage.
  59. javajunkie

    Wish ADA MP-1

    I have 2 myself, one with the 3 tube mode. I had good results w/ the Axe-Fx II with it, same with my Rockman Sustainor.
  60. javajunkie

    Changing Reverb quality not affecting CPU?

    yep, porting over presets, it is probably much easier to keep them the same.
  61. javajunkie

    So I am going to go with an FM3 in the loop of an FM9

    I was running a timeline, big sky, volante, hog , and 3 drive pedals , but I have come to like the Fractal Delays and Reverbs a little better than the strymon and I just need a little extra processing power to get my presets all ported over from the 3. The volante will stay , it just sounds...
  62. javajunkie

    Changing Reverb quality not affecting CPU?

    Noticed that right away. The 2 delay blocks are similar. Same with Amps. The rest of the effects share a core. On the III Reverb quality does change dsp usage %.
  63. javajunkie

    FM9 CPU Utilization Question

    My more standard presets, take a lot less:
  64. javajunkie

    FM9 CPU Utilization Question

    With Cabs set to Ultra Res, I kept the plex delay on the Plex Delay Channel until I need it for the Plex verb, the cpu goes to 85% once I change it to Plex Delay. That is right on the verge of muting out.
  65. javajunkie

    FM9 CPU Utilization Question

    The Plex delay definitely is not on the dedicated delay core. It consumes quite a bit of processing power, especially when set to Plex Delay. Delays hardly add any thing, Reverbs hardly add anything (doesn't atter in if you set to ultra high or economy - the dsp meter does not significantly...
  66. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    I got it Wednesday, but didn't get a chance to do anything with it until yesterday.... then my AC went out. Still waiting for AC part. 100 degrees no AC. I did get to start port over presets from the III. I am surprised how much I can port over from the III. Definitely some work to get things to...
  67. javajunkie

    AITR

    I am for less IR slots for FullRes capability.
  68. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    sitting here waiting for ups...... It is only a block away.
  69. javajunkie

    Set list function

    Nice, so looking forward to this.
  70. javajunkie

    Muse Settings for Axe Fx3

    I love the guitars he has with the fuzz factories built in.
  71. javajunkie

    Welcome John Mayer

    Ahhh, that has potential. It has that has some of the resonance going on. It just needs to sustain itself (which should be easy enough to accomplish). The Arenalinn sequence is actually completely separate from what you play. That is why I went down the filter road you can get a oscillation...
  72. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    Well I was told I was special, but that is not always a good thing :pensive:
  73. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    Working insane amounts of hours for last 3 years (last year plus was especially bad with everyone moving to telework and several high profile attacks on Government systems). I am moving from IT operations to Cybersecurity Compliance now, so I will actually be able to get back to some what normal...
  74. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    It is on the way!
  75. javajunkie

    Welcome John Mayer

    I remember the other issue with delay based versions of this. The arpeggio changes depending on what notes/chords you are playing. The Adrenaline does do that. It just plays the same arpeggio in the same key.
  76. javajunkie

    Welcome John Mayer

    Yeah, I tried that as well. Delay or Filtering works but it hard to get that resonance right.
  77. javajunkie

    Welcome John Mayer

    So the filer block set to allpass 4th order, feedback set to -100 and set the frequency to be modified by the sequencer. I'll have to figure out the pitch values again. I haven't listened to that song for a long while.. I also stumbled on a really cool sequencing effect by using the Resonator...
  78. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    Looking forward to this!
  79. javajunkie

    Announcing the New FM9 Amp Modeler/FX Processor

    Well, I'm in!
  80. javajunkie

    Welcome John Mayer

    All the Adrenaline stuff uses resonant filters for the pitch arpeggiation.
  81. javajunkie

    Welcome John Mayer

    i would love to revisit this. We have a lot more tools at out disposal now.
  82. javajunkie

    What was the trick for faster boot up?

    Then it might be good to have a backup ready to go. It would be worse if the rig went down entirely for some reason w/ 3000 people.
  83. javajunkie

    Guitars: how many and brands?

    or G=n^3
  84. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    Yeah, this doesn't seem possible with one button on the FC-6/12 at this time. There would need to be a away to link 2 channel changes to one button (or something similar). Scenes are the way to do that now. But since that is not viable for you, I see your issue. With a MIDI controller that is...
  85. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    I'll have to read up on the current capabilities of the FC12, maybe there is an easy to group 2 channel changes with one button. At some point, I am going to get and FC12 so I can better help others with it.
  86. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    MIDI Sysex format for channel change: SET/GET CHANNEL (COMMAND 0BH) Sets and/or gets the channel of an effect. Message format: F0 00 01 74 10 0B id id dd cs F7. id id is the effect ID as two 7-bit MIDI bytes, LS first. dd is the channel (0 – 3). To query set dd = 7F The id on the Controller = 2
  87. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    I can on my RJM Mastermind (I just tried it). It might take a system exclusive on another controller but The third party MIDI spec document gives commands for it. I can also change the channel of the multiplexer with it.
  88. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    Just a FYI (in case you don't know), Every channel will have unique setting for ALL the controllers settings. So you would want to copy channel A to channel B before you make the input change.
  89. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    was replying to Piing on that one.
  90. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    Sorry, reread the original post. It a one button solution for doing both. Idea: MIDI controller send command to toggle channels of multiplexer and channels of controller. Would that work (I do not know what you are using to control the Axe-fx III)?
  91. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    I thought it would do input 2 now?
  92. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    My wireless units are silent when you turn them off and on. Not necessarily, on additional space with A/B. They can be light and small. I mounted mine on the vertical walls of the rack. But to your point, if you already have a wireless solution in place, the above may not be a viable solution.
  93. javajunkie

    How to change the Input source of Controllers according to the active physical Input ?

    I use a midi controlled single mutil-channel receiver and and switch from it. Prior to that, I used a MIDI controlled A/B switch. That being said, couldn't you use Channels in the Controller section and switch the input sources of Pitch, ADSR, and Envelopes to the needed input? Edit- missed...
  94. javajunkie

    Share the oldest recording that you have

    SAW along w/ Cakewalk (just midi back then) was what I started with. CoolEdit was a game changer when it came out went to that until Cakewalk and Cubase started integrating Audio and MIDI.
  95. javajunkie

    Share the oldest recording that you have

    :)
  96. javajunkie

    Look at what this person claims to have made?

    he's thinking about it ;)
  97. javajunkie

    Step Diatonic Harmonizer

    so much fun to be had
  98. javajunkie

    Wish Broadcast Audio Delay for bigger stereo or to align blocks with racks

    There a plenty of ways I have found to do this (flanger w/ depth 0, or classic enhancer for example). The easiest way I have found for micro delays is to use a compressor (dynamics processor is a low cpu use type) set to a ratio of 1 (I suppose a mix of 0 would work too) and adjust the look...
  99. javajunkie

    Sequencer Step Funk

    Awesome Matt!
  100. javajunkie

    Implemented Poly Capo

    How would this be different than the Virtual Capo that already exists on the Axe-fx?
Back
Top Bottom