Continuing in the new user tips theme...
People often talk about applying low cuts and high cuts. This is because the cabinet models used in modelers are almost always (with a couple exceptions) based on near-field samples of guitar cabinets. IOW, the mic is pushed up against the grill cloth. This just happens to be the way that record producers/engineers mic a cabinet in the studio and the way guitar cabs are mic'd on stage. This is done primarily for isolation reasons.
The downside of this approach is that the resulting tone will have a lot more lows and highs than when listening to the amp+cab "in the room". What the mic "hears" when pushed up against the grill cloth is not the same thing that we hear standing 10 feet away.
The most common technique to deal with this is to simply cut out the lows and highs using blocking filters, e.g. highpass and lowpass filters. Producers routinely do this when mixing as excessive amounts of lows and highs will cause the guitar tracks to get "lost in the mix". Live sound engineers often do the same thing.
The Cabinet block has blocking filters built in for just this very reason. You can also use a couple dedicated filter blocks or a parametric EQ block. For now let's use the Cabinet block. My personal settings are Low Cut around 80 Hz and High Cut around 7500 Hz and Filter Slope set to 12 dB/octave but these are just a starting point.
Far-field IRs are available but they are rare due to the difficulty in obtaining them. They require a large facility and special techniques making the process impractical in most cases. So, until an abundant source of far-field IRs are available we need to think like a producer/engineer who is dealing with the mic pushed up against the grill cloth. This means shaping the tone with EQ to remove unwanted frequencies.
People often talk about applying low cuts and high cuts. This is because the cabinet models used in modelers are almost always (with a couple exceptions) based on near-field samples of guitar cabinets. IOW, the mic is pushed up against the grill cloth. This just happens to be the way that record producers/engineers mic a cabinet in the studio and the way guitar cabs are mic'd on stage. This is done primarily for isolation reasons.
The downside of this approach is that the resulting tone will have a lot more lows and highs than when listening to the amp+cab "in the room". What the mic "hears" when pushed up against the grill cloth is not the same thing that we hear standing 10 feet away.
The most common technique to deal with this is to simply cut out the lows and highs using blocking filters, e.g. highpass and lowpass filters. Producers routinely do this when mixing as excessive amounts of lows and highs will cause the guitar tracks to get "lost in the mix". Live sound engineers often do the same thing.
The Cabinet block has blocking filters built in for just this very reason. You can also use a couple dedicated filter blocks or a parametric EQ block. For now let's use the Cabinet block. My personal settings are Low Cut around 80 Hz and High Cut around 7500 Hz and Filter Slope set to 12 dB/octave but these are just a starting point.
Far-field IRs are available but they are rare due to the difficulty in obtaining them. They require a large facility and special techniques making the process impractical in most cases. So, until an abundant source of far-field IRs are available we need to think like a producer/engineer who is dealing with the mic pushed up against the grill cloth. This means shaping the tone with EQ to remove unwanted frequencies.