TheOtherDave
Inspired
How wide are your feet? I think I'd have a hard time not getting both of the right ones at the same time.My rig that you see above is a Duo 34, so it can fit a FM9 and three expression pedals [...]
How wide are your feet? I think I'd have a hard time not getting both of the right ones at the same time.My rig that you see above is a Duo 34, so it can fit a FM9 and three expression pedals [...]
Yeah a lot of people here have the Temple Duo 34, myself included. My rig and board includes 2 exp, 1 ext switch, and cabling underneath for multiple in/out to the modules on the side. Plus power cables and usb cables and (eventually) LED lights underneath. All in a Pelican 700 for transport, which when loaded in the case is around 34 lbs. not nothing but not terrible and better than an amp + pedalboard +/- rack etc. So it is heavy but not unmanageableMy rig that you see above is a Duo 34, so it can fit a FM9 and three expression pedals with a little bit of air space around the FM9 for the vents. I have had the board for years, and have been using the same setup with an AFX3/FC-12 since 2019. It has been fantastic.
I grabbed the FM9T to simplify my load in/out when gigging. With that addition, I have cut the number of items I need to carry in half. I used to carry my guitar in its gig bag, the board in its bag, my rack with AFX3 and a stand for the rack (4 items). Now all I need is the guitar and the board. I'll be taking the new setup out for its maiden voyage tomorrow morning!
Trio 21?Finally got my wireless attached to my temple audio board. Initially, the wireless wasn’t going to be attached to the board due to space issues. However, the back order for the wireless, ordered in January, just kept creeping out. Shure recently released the GLXD-16+ pedal wireless and it fits great!
View attachment 126807
You beat me to it! I was gonna ask the same question. Look's like the FM9 just fits on there. Look's good. I was looking for another pedalboard to mount my FM9 on and PT 200. Just so I can put it on my 2x12 behind me and use my RJM MMGT22 out front which is on a TA Trio 28. I think it might be the right board to go for.Trio 21?
My bad,Trio 21, not a duo. The FM( fits, but you need to take the bumpers off, if you want to leave the board handles on.Trio 21?
Thanks for the info! Got it! makes sense not being able to have the handles attached. Not an issue for me can take those off and carry the board using the sides. It's either this or an FM3 on a duo 24 board. I like this idea though, I might give it a go.My bad,Trio 21, not a duo. The FM( fits, but you need to take the bumpers off, if you want to leave the board handles on.
My rig that you see above is a Duo 34, so it can fit a FM9 and three expression pedals with a little bit of air space around the FM9 for the vents. I have had the board for years, and have been using the same setup with an AFX3/FC-12 since 2019. It has been fantastic.
I grabbed the FM9T to simplify my load in/out when gigging. With that addition, I have cut the number of items I need to carry in half. I used to carry my guitar in its gig bag, the board in its bag, my rack with AFX3 and a stand for the rack (4 items). Now all I need is the guitar and the board. I'll be taking the new setup out for its maiden voyage tomorrow morning!
The service went well from a playing perspective. Unfortunately, listening back to the FOH mix afterwards none of the guitars (2 electric and 1 acoustic) seemed to even be present in the mix.Thanks!!! How was the gig…
The setup. I think I just need a power plug on the side and 4 outputs for (monitor/backline and pa send)
-the right options
-inter-connecting cables
-figuring out how you folks screw into the pedals and fm9
I used these nifty perspex risers that @ZenRigs Man sells:View attachment 126836
Thanks!!! How was the gig…
The setup. I think I just need a power plug on the side and 4 outputs for (monitor/backline and pa send)
-the right options
-inter-connecting cables
-figuring out how you folks screw into the pedals and fm9
I love the ZenRigs Man screen protectors but they are all sold out.….and I wonder with the screen protectors in place if those nifty big plastic buttons you have would still work!I used these nifty perspex risers that @ZenRigs Man sells:
View attachment 126838
They make using the Temple mounting plates a cinch, and allow room for LED strips for under-lighting them, which is really helpful in low light....
yes, 24x16.Which board is this? Creation Aero?
New (better) versions coming this month and, yes, they work fine with Mooer toppers so should be fine!I love the ZenRigs Man screen protectors but they are all sold out.….and I wonder with the screen protectors in place if those nifty big plastic buttons you have would still work!
Ooh, that’s exciting to hear!New (better) versions coming this month and, yes, they work fine with Mooer toppers so should be fine!
I watched the video and I like the design approach very much…and having been working in R&D for 30 years, I have a jaded edge so take that FWIW.New (better) versions coming this month and, yes, they work fine with Mooer toppers so should be fine!\`
Ah, thanks mate - that really means a lot to me!I watched the video and I like the design approach very much…and having been working in R&D for 30 years, I have a jaded edge so take that FWIW.
are you using dual lock for the fm9 and pedalsAll setup. My user presets from my FM3 transferred over nicely.
View attachment 88431View attachment 88432
Most likely screwed thru the board.are you using dual lock for the fm9 and pedals
I'm looking forward to the dual expression pedalNew (better) versions coming this month and, yes, they work fine with Mooer toppers so should be fine!