Let's see those FM3 rigs!

allan13 said:
do you program the M-Vave Controller via Midi Learn or with the Cubesuite App ?
With Midi Learn how can I program Scene Changes ?
Click to expand...
I programmed in the CubeSuite the CC I wanted and then did midi learn in the FM3 (or you can put the CC manually)
For scene you need the CC value to be as per the manual page 117
Value 0 is scene 1
Value 1 is scene 2
Etc..
 

Attachments

  • E72AD0E7-1957-4750-B8B3-24424A721E19.jpeg
    E72AD0E7-1957-4750-B8B3-24424A721E19.jpeg
    513.3 KB · Views: 32
Joker069 said:
I programmed in the CubeSuite the CC I wanted and then did midi learn in the FM3 (or you can put the CC manually)
For scene you need the CC value to be as per the manual page 117
Value 0 is scene 1
Value 1 is scene 2
Etc..
Click to expand...
Yes, I know.
But if you have to set the first CC Value in Cubesuite then you can also set the second CC Value in Cubesuite.
You can't do that in total via midi learn.

thanxs
 
I run this pedalboard by itself (internal Amp/cab modeling) or with a set of Synergy SYN-2 preamps in a 4cm set up depending on the venue and situation.

Without the SYN-2 I have this configured and programed to run:
1) Output 1 (with amp and cab) direct to FOH and an IEM
2) Output 2 (with just amp modeling) to the power amp/speaker of either a Port City Pearl combo or Budda Twinmaster combo. I like a little stage volume but pretty much rely on the IEM. (I also hate not seeing a guitar amp on stage with a live rock band... all a part of the "show")

With the SYN-2 preamps, the FM3 is in a 4cm configuration with output 1 feeding back into the SYN-2 stereo and I use the main outs on the SYN-2 to go to the Pearl or Twinmaster (or both for a stereo sound) and the XLR out on the SYN-2 (cab sim) to FOH and my IEM.

The MC8 lets me easily create and arrange set lists as well as having direct access to the channels on the SYN-2. I leave the FM3 on Scene mode for easy access.... typically verse, chorus and solo scenes.

The Bloom is an always on pedal; I kick on the compressor sometimes on clean tones. The EQ gets kicked on when I'm playing through a dark guitar or I want to get a single coil sound from a humbucker. The Novadrive takes some of the strain off the FM3 CPU but I rarely use it as I've found good workarounds. I might replace the Novadrive with a Boss SY-200 to get some better Synth sounds from this rig.

Truly happy with this rig where I can just grab a guitar and this board and go direct and it sounds HUGE. I can use it with real tube amps. I can also add in my Syn-2 preamps and the easy access adjustments makes it a great live rig. Takes me about 15 minutes to set up and sound check.

Side note - the CME wireless Midi works flawlessly.
 

Attachments

  • IMG_1557 copy.jpg
    IMG_1557 copy.jpg
    528.8 KB · Views: 191
  • IMG_1556 copy.jpg
    IMG_1556 copy.jpg
    579.3 KB · Views: 196
  • IMG_1555 copy.jpg
    IMG_1555 copy.jpg
    593.4 KB · Views: 205
Pedalboard du jour. I can't take myself seriously thinking this is the one.

Core tone is usually the Morning Glory, which pushes the yellow side of the KOT for Crunch. Solos kick in the red side of the KOT, delays, boosts, and all manner of goodness. All made possible by modding the KOT so each side can be accessed individually, a dpc.micro ,and a cheapie hotone midi controller.

If MIDI commands could be stand in switches...but I digress. IMG_7748.jpeg
 
E17A5650-4BE7-4DA4-98BB-313961949E4B.jpeg

A great team! Two midi cables. The Roland MC707 send a midi clock to the FM3. The FM3 send midi to the MC707 to play different patches thru the scene midi block. The MC707 currently goes into Input2 and then to Out1 with my wet guitar signal.

I will certainly second the wish for ”Utility/Send midi” in the footswitch software. A very cool addition (at least for me) Is to be able to send midi start stop continue (to the MC707).

Then its really one rig to rule them all!
 
Last edited:
Xcdchdchjjf said:
You win.
Click to expand...
Agreed.

SixRails said:
View attachment 109928

This is my first post on this forum and this is my rig. I've only had the FM3 for a couple of months now. I came from the Helix world and was shocked how much better the Fractal stuff sounds. I'm running the FM3 in stereo into the 2x12 cabinet which is loaded with Celestion Greenback speakers.
Click to expand...

I'm seriously considering doing something like this. How do you like it?

Also, which amp? PS700? Isn't that a little crazy with 25W speakers?
 
SixRails said:
View attachment 109928

This is my first post on this forum and this is my rig. I've only had the FM3 for a couple of months now. I came from the Helix world and was shocked how much better the Fractal stuff sounds. I'm running the FM3 in stereo into the 2x12 cabinet which is loaded with Celestion Greenback speakers.
Click to expand...
Nice. I have a similar rig, but used a Quilter Tone Block 202 in FRFR mode into a BlockDock 12HD cab. Sounds mahvelous.

Yeah, no kidding how much better it sounds, totally amazed me... :cool:

I used my OMG9 rig all the time... until my FM9T arrived, but I still have the FM3 to use as a backup, and also for very small stages with little floor space, or really, really dive-y places with drunken women spinning madly with drinks in their hand... :eek:
 
marsonic said:
I'm seriously considering doing something like this. How do you like it?

Also, which amp? PS700? Isn't that a little crazy with 25W speakers?
Click to expand...
I absolutely love it, it's the best sounding rig I've ever owned. If you prefer the sound of a real guitar speaker cab then I highly recommend a setup like this.

The amp is the Seymour Duncan Power Stage 700. And yes, maybe it's a little crazy running a high wattage amp with 25 watt speakers but I've tried so many other speakers with this setup and in the end the Greenbacks always sounded best to my ears. I can get the rig loud enough to play with a drummer and no problems so far. The headroom of the amp is really nice to have.
 
I have an inexpensive yet great 22Watt Class D amplifier from Reverb going into a 1X12 Avatar cabinet with a 16 Ohm Celestion Blue, and it really does sound lovely. Whenever I run stereo, that's one reliable, great sounding side.
 
AlexMania said:
I have an inexpensive yet great 22Watt Class D amplifier from Reverb going into a 1X12 Avatar cabinet with a 16 Ohm Celestion Blue, and it really does sound lovely. Whenever I run stereo, that's one reliable, great sounding side.
Click to expand...
What amp? I think I've decided what amp I want if I do this. But, I'm still curious.
 
Cobblestone from Kartakou Amplification in Poland. Vasili is a super guy and I owe him a sound clip. They're super reasonable and it's actually 45Watts. Holds up to a loud drummer quite nicely and the speaker it's going into is rated at 15Watts. Oh yeah, it goes on my pedalboard just in case it's needed. Fantastic backup, if nothing else.
 

Attachments

  • IMG_0003.jpeg
    IMG_0003.jpeg
    1.3 MB · Views: 61
  • IMG_0004.jpeg
    IMG_0004.jpeg
    1.4 MB · Views: 61
AlexMania said:
Cobblestone from Kartakou Amplification in Poland. Vasili is a super guy and I owe him a sound clip. They're super reasonable and it's actually 45Watts. Holds up to a loud drummer quite nicely and the speaker it's going into is rated at 15Watts. Oh yeah, it goes on my pedalboard just in case it's needed. Fantastic backup, if nothing else.
Click to expand...

That looks cool.

I'm leaning heavily toward the Auratone A2-30 because I want to use wet/dry (it's stereo), plus I generally trust Bettermaker to make good stuff. I also generally prefer power amps that don't have any controls on them...it's one more thing to track down if something gets bumped as opposed to just controlling everything from the Fractal. Plus, it's small and passively cooled. So, I should be able to attach it to the cab with pedalboard tape or something and then just treat it like a super-clean combo amp.

So, yeah....I think I've decided on all the pieces. Now it's just a question of whether or not I want to drop the ~$1100 on it.
 
AlexMania said:
I’d love for you to get both as the cobblestone would be a great backup and report on the differences. Good luck deciding!
Click to expand...
Honestly...by the time I get around to it, I probably will have forgotten about the question.

But...I also buy clean power amps entirely on features and reputation. As long as a clean power amp is running well within its available headroom and set flat, I've never heard a difference that mattered except that tube amps tend to essentially be low-passed and some are noisier than others.

Guitar amps...they're a different story. But, they're nowhere near linear how I set them up.
 
For the Cobblestone side, I keep the bottom end open as I get the flub from the FM3 but I do roll it off anywhere from 5.5K-8K depending on what amp model I’m using..
 
You must log in or register to reply here.
Back
Top Bottom