ok. tx a lot for checking... i hope indeed that one day we will get a down tune block ;-)
Is the formant block + pitch block somehow different from toaster style formant pitch shifting?
I've seen the demo videos, but am not that familiar with the formant block in the AFXII.
CAB SIZE is a kind of formant shifting.
Sounds fine here. Very low latency and no warble. I'm not hooked up to USB though. Once the CPU usage crosses a certain threshold (which could happen if you are streaming audio) the pitch detection will slow down as the global pitch detector necessarily has a lower priority than the primary audio processing.
If you change the Pitch Source to Local then the local pitch detector runs at the same priority as the audio.
Sounds fine here. Very low latency and no warble. I'm not hooked up to USB though. Once the CPU usage crosses a certain threshold (which could happen if you are streaming audio) the pitch detection will slow down as the global pitch detector necessarily has a lower priority than the primary audio processing.
If you change the Pitch Source to Local then the local pitch detector runs at the same priority as the audio.
Also, there have been NO changes to the pitch block or pitch detection algorithms and this has been verified with a Windiff.
Let me start by saying that FW15 sounds fantastic (after noise problem in FW 15beta being solved ). It all sounds better. So thumbs up for whole FAS team.
The only issue I have left is downtuning.
I have a few presets (U2 presets) where I use a pitch shifter in front of the chain to downtune the sound ( as my singer can't reach the high notes on Pride) . I used this technique in earlier FW versions and it worked fantastically well. With FW15 am kinda hearing double notes which sound false moreover. I have tried to tweak a few parameters but without result.
Has anyone witnessed the same, and in case has anyone found a solution?
Tx a lot in advance guys
Are you turning the voice 2 level down?Wow! Now mine is not working. Earlier, I was able to insert a pitch block, fixed harm, -1, mix at 100% and would get a half step down. Now when I do it I get both the -1 and the standard tuning sound and a bunch of noise. ???
Are you turning the voice 2 level down?
No. Voice 2 level was 100% even though pitch was 0. Turning down to zero almost fixed it completely but I still hear a trace of the standard tuning in the mix. This was the case with earlier versions of the firmware?
No. Voice 2 level was 100% even though pitch was 0. Turning down to zero almost fixed it completely but I still hear a trace of the standard tuning in the mix. This was the case with earlier versions of the firmware?