:lol: :lol: :lol: Ahhh... I am wetting my pants!mortega76 said:He's so brewtalz, he don't need no stinkin' cab...
:lol: :lol: :lol: Ahhh... I am wetting my pants!mortega76 said:He's so brewtalz, he don't need no stinkin' cab...
FractalAudio said:Version 8.03 will change this. The drive control range now matches the modeled device.
danielodland said:FractalAudio said:Version 8.03 will change this. The drive control range now matches the modeled device.
Cliff, what was the reason for the change in the first place, and why are you changing back?
danielodland said:FractalAudio said:Version 8.03 will change this. The drive control range now matches the modeled device.
Cliff, what was the reason for the change in the first place, and why are you changing back?
tonygtr said:danielodland said:FractalAudio said:Version 8.03 will change this. The drive control range now matches the modeled device.
Cliff, what was the reason for the change in the first place, and why are you changing back?
Well, my guess is that by giving the pedal more available range, you could get more flexibility. Although, people seem to have a hard time getting used to this ( hence all the posts from people who don't read the release notes enough ), so that's probably why he's changing it be like the real pedals instead.
javajunkie said:FractalAudio said:Version 8.03 will change this. The drive control range now matches the modeled device.
haha :lol: , right after I adjusted all my drives!
So could please anyone tell me how to get my 7.18 patches sound the same on 8.02???? On 7.1x, I had a drive block with DRIVE=0.0 and MIX=50% (the rest doesn't matter, I guess). I read, that setting the drive to 5.0 on 8.02 is the same as 0.0 on 7.18, but it isn't (at least for my ears). I did set the drive to 0 and the mix to 50% because I don't want to hear the drive, I just want to have some bass-tightening going on. If I now set the drive to 5.0 I can clearly hear a f***in distortion pedal. Did the LEVEL change, too? Can anybody help me?danielodland said:Dont listen, Cliff!!! Do not listen to this! =))
RiF said:So could please anyone tell me how to get my 7.18 patches sound the same on 8.02???? On 7.1x, I had a drive block with DRIVE=0.0 and MIX=50% (the rest doesn't matter, I guess). I read, that setting the drive to 5.0 on 8.02 is the same as 0.0 on 7.18, but it isn't (at least for my ears). I did set the drive to 0 and the mix to 50% because I don't want to hear the drive, I just want to have some bass-tightening going on. If I now set the drive to 5.0 I can clearly hear a f***in distortion pedal. Did the LEVEL change, too? Can anybody help me?danielodland said:Dont listen, Cliff!!! Do not listen to this! =))
Care to elaborate on your settings? Or even upload a patch? I have not been able to dial in that model properly...RiF said:... I found a new favorite amp-type-of-the-week: Energyball, highly underrated!!! The default-setting do not do it justice, but when tweaked, this sukka rokkz!...
I will upload the patch and probably a short clip in the next days (expect it to be until or before this weekend) because I want to make sure it is as great as I think it is... In the past, I did not have very much success with the Energyball and have been a bit disappointed, because I am a big Engl-fan in the "real world". But I must have touched some parameters by accident that made it rock :?. Or my ears fooled me...Dpoirier said:Care to elaborate on your settings? Or even upload a patch? I have not been able to dial in that model properly...RiF said:... I found a new favorite amp-type-of-the-week: Energyball, highly underrated!!! The default-setting do not do it justice, but when tweaked, this sukka rokkz!...
Stringtheorist said:Maybe I'm missing something but I've never found I needed to add a drive block to get sufficiently "brootal" tones. I just tweak the Advanced Lo Cut parameter and balance the Bass and Depth to taste. :?
You're right Stringtheorist, upping the Locut to about 100Hz and keeping the bass controls (including DEPTH or DEEP) low does part of the trick. Usually I like pure amp tones more than pedal'ized tones, but everybody seems to use a TS-type of pedal in front of their real Rectifiers and 5150s (see the Andy Sneap Ultimate Metal forum) and I have to admit that a drive block (thank Cliff that he added the MIX control to keep it low) really gives me that little extra tightness and edge to let them cut through in a busy mix. Maybe it's my main guitar (a Les Paul Standard) and some EMG-equipped ESP, Ibanez or Schecter will have a tighter bass by nature (sth that I doubt, coz my EMG Charvel is muddier than my Les Paul).Stringtheorist said:Maybe I'm missing something but I've never found I needed to add a drive block to get sufficiently "brootal" tones. I just tweak the Advanced Lo Cut parameter and balance the Bass and Depth to taste. :?