Brian Coonan
Power User
Wow, just dialed up the Silver at stock setting and put my normal Dyna cabs on them - it is magnificent!
I stand by what I wrote.But not necessarily fit enough to update the main fractal download page (not forum page), otherwise we would have already had 24.xx versions on that webpage. You of all people know how easy it is to update that link on the webpage so if it was "all stable versions go on webpage", then why is it still on 23.05?
The website version always lags behind the forum and NEVER gets all updates posted there, only the most stable of stable versions. It has been discussed in the past year or two hear on the forum, that the website version does not get updated with each FW release and it is more than about Matt being in charge of it. See above and below.
If you are referring to this post: https://forum.fractalaudio.com/threads/axe-fx-iii-firmware-24-02-release.200616/post-2503600 , Cliff is referring to the auto update in Fractal bot (the comment he was responding to was "Cliff The auto update function in the editor still offers the 24.02 version."), not the FW listed on the webpage I was mentioning. Fractal Bot is NOT using that webpages values or content to generate it's update messages. If it was, it would still be offering 23.05 and most of us know that Fractal Bot has already offered us 24.01, 24.02 and 24.03. So no, Matt being the handler of any of this is not why the web page is not updated.
What you said is what I always thought:I stand by what I wrote.
BUG: Gapeless switching, preset attached.
There are audiable artefacts, even if no change in signal flow is in scene change.
It's reproducible:
Out 1 bug
- Play long tone in input 1, listen output 1, switch between scenes 3,4.
- Play long tone in input 2, listen output 2, switch between scenes 1,2.
Out 2 bug
Thanks for fast response.The crossfade triggers for ALL outputs whenever amp blocks change channels. Your amp blocks are changing channels between scenes. Not a bug.
This demo is great for those who didn’t really know the amp. This amp is super versatile in the end .
Make sure it isn’t 24.02, that’s what FractalBot picks up, and that version is no more…I don't know what I'm doing wrong but I cannot update to Firmware 24.03. I can get to the point were I would click on begin to download but nothing happens.
Most likely FractalBot is still pointing to 24.02 but the link has been pulled.I don't know what I'm doing wrong but I cannot update to Firmware 24.03. I can get to the point were I would click on begin to download but nothing happens.
^This^Otherwise, go to the first post in this thread and download, unzip, install.
I wonder if there's a particular reason why the crossfade is done on the out blocks and not on the amp blocks (and those few other blocks which introduce the gap).The crossfade triggers for ALL outputs whenever amp blocks change channels. Your amp blocks are changing channels between scenes. Not a bug.
Yep I tend to find amps with the plate driven stacks to have a bit cleaner dryer like the Splawn / Wizards for example with a sharper attackyep the new version of the channel of the Jubilee is "cleaner"
Are you speaking from first hand knowledge or is this your opinion? Cause it doesnt make sense.The link on this page for FW:
https://www.fractalaudio.com/axe-fx-iii-downloads/
Is always going to be considered a stable release.
The Betas are just that, experimental changes that are likely to not be 100% stable.
Official FW releases here on the forum are not considered final/stable but are no longer Betas.
The release listed at https://www.fractalaudio.com/axe-fx-iii-downloads/ will always be a stable release where all known bugs have been worked out. FW 24.03 SHOULD be showing up in your Fractal Bot. If it is not, ensure you have the latest Fractal Bot and Axe Edit. If that still does not work there are workarounds to install, but the way it is programmed it should be telling you if a new FW release is available (although it does not recognize the Beta's as new releases and will not warn you from what I understand).
We need to understand that when developing anything, there are going to be delays before one can truly declare something "stable". In order for that to happen, the FW (including FW's that have graduated from beta) must be in circulation to reach such a conclusion. Therefore, when a FW is released and is NOT a Beta, it will not be instantly put on the downloads page of the FAS website as that slot has been reserved for something that has reached all above criteria. It will be put on that page once it has spent some time in the field to ensure that all bugs have been found and addressed. On the forum, we are LUCKY to be able to enjoy the incremental updates, even prior to them meeting all criteria to be considered stable.
If you choose to use the FW's from here on the forum pages as opposed to the FW appearing at https://www.fractalaudio.com/axe-fx-iii-downloads/, you are doing so at your own risk. If you have any concerns, use ONLY the FW that is listed on the official stable release page. Otherwise, be prepared to be both a guinea pig and a leech ;~))
Ah, Makes sense. I had a Jubilee back in the day with the matching V30 cab. The model didnt seem right to me but it's been a while.The old Brit Silver model was actually a Lerxst Omega, which begs the question of why it was labeled as a Brit Silver originally. If the new model is actually a Marshall 2555 then why not rename the old to Lerxst and create the new one alongside?
Off the top of my head, it's probably to bottleneck the code that handles the crossfade. Having it in multiple places would require synchronizing them, which, on a system that uses events to communicate between the code blocks, would introduce gaps as the first to receive the message has to halt and wait for the others.I wonder if there's a particular reason why the crossfade is done on the out blocks and not on the amp blocks (and those few other blocks which introduce the gap).
Fractalbot is linking to the previous FW and it's no longer there. Took me a minute to see what was happening. Download the link from the first post on this thread...I don't know what I'm doing wrong but I cannot update to Firmware 24.03. I can get to the point were I would click on begin to download but nothing happens.